Cab mount bushing help...67 K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junior43 · 01-15-2015, 02:00 PM

bought new cab mount bushings, and cant seem to locate them where the cab sets right. They were ordered to fit 1/2 ton 4x4's and 3/4 ton 2x4. Placed where I think they should go, the cab has way too much forward rake. I wasn't sure if this was an odd '67 issue or I am overlooking something. Any help or bushing dimentions would be appreciated. Thanks, Jeff

**michael bustamante** · 01-15-2015, 03:21 PM

can you post a pic of the way you set up the front and rear mounts?

CrewCab59 · 01-15-2015, 05:07 PM

Jeff ,
Are you using the rubber or poly mounts , if poly I'm guessing the bushing is setting flush on the frame mount? The poly and the inner steel sleeve can be to thick not letting the bushing setting flush. This mybe not your problem but worth a look.

Scott

junior43 · 01-15-2015, 06:03 PM

these are the rubber ones. with the taller ones is the rear, which is where I thought they go, I cant seem to get a combination that's even close. I will post some pics tomorrow. thanks guys!!

In The Ten Ring · 05-02-2015, 12:23 PM

Did you ever get the bushings figured out?

01-15-2015, 02:00 PM	#1
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Cab mount bushing help...67 K10 bought new cab mount bushings, and cant seem to locate them where the cab sets right. They were ordered to fit 1/2 ton 4x4's and 3/4 ton 2x4. Placed where I think they should go, the cab has way too much forward rake. I wasn't sure if this was an odd '67 issue or I am overlooking something. Any help or bushing dimentions would be appreciated. Thanks, Jeff __________________ Coop

01-15-2015, 03:21 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Cab mount bushing help...67 K10 can you post a pic of the way you set up the front and rear mounts? __________________ 1967custom

01-15-2015, 05:07 PM	#3
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: Cab mount bushing help...67 K10 Jeff , Are you using the rubber or poly mounts , if poly I'm guessing the bushing is setting flush on the frame mount? The poly and the inner steel sleeve can be to thick not letting the bushing setting flush. This mybe not your problem but worth a look. Scott __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

01-15-2015, 06:03 PM	#4
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Cab mount bushing help...67 K10 these are the rubber ones. with the taller ones is the rear, which is where I thought they go, I cant seem to get a combination that's even close. I will post some pics tomorrow. thanks guys!! __________________ Coop

05-02-2015, 12:23 PM	#5
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Cab mount bushing help...67 K10 Did you ever get the bushings figured out?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.