292 I6 wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 10-07-2003, 09:35 PM

Looking for a 292 I6 within 150 miles of the Minneapolis/St Paul Minnesota area (will consider a little further drive if neccessary). Does not need to run but must be rebuildable and complete with all brackets, pulleys, etc...

PM me or reply here if you have one and let me know what you are looking to get. I will come pick it up.

Thanks - Jeff

jacquesdean · 10-11-2003, 06:25 PM

Have one in Al, complete running $200.00

ItsNotABlazer · 10-11-2003, 09:09 PM

If Jeff is not interested in it I might possibly be. Don't want anyone to think I am trying to hustle him out of a deal. :p What is it out of.......or is it still in a vehicle? I am gonna be that way on vacation next week and might could swing by there. I think my lowered truck could haul it back if I air the bags up to 75 lbs or so.

Actually I am going to be in Gatlinburg but was thinking of heading to Tunica or possibly Biloxi so you would be kinda on the way. I notice Snead is kinda close to where I bought my GN from. Guy lived south of Birmingham I think. Car used to belong to Byron Bennett. If you are into Mustangs I am sure you know the name lol.

I will be leaving out next Thursday morning very early so if I could know something by then it would help greatly.

Brad

bigblock73 · 10-12-2003, 08:24 PM

Brad, help yourself...Alabama is too far to travel. I really wish I could find one close by

jacquesdean, thanks anyways...I am interested, you are just too far away.

-Jeff

C10 - C90 Bill · 10-18-2003, 08:02 AM

Have one available in Moneta, VA. It's a '65 292. Was a good running engine till a valve dropped. Has some piston top damage on one piston. Good engine for repair or rebuild. Will sell complete short block for $100 or complete engine less head for $200.

**Captkaos** · 10-18-2003, 11:43 AM

jacquesdean,
If ItsNotABlazer isn't interested I will come pick it up? Do you happen to have any accessories with it/on it? What year model?

ItsNotABlazer · 10-20-2003, 01:03 AM

Chris go ahead and work out a deal with him. I have too many other things going right now so I wont be able to go ahead with this deal.

Btw Chris I was through Birmingham earlier ...........probably 9ish Sunday morning. Was on my way home. Long drive from Southern TN to NE Texas with a 5 hour layover in a casino in Shreveport that yielded a net loss of $20 lol

Brad

**Captkaos** · 10-20-2003, 08:51 AM

Will do Brad.

BTW, if you would have let me know, you could have dropped by and witnessed the Jimmy being cranked. Found out it apparently has a bad fuel pump.

**JDL** · 10-23-2003, 07:25 PM

I might be able to get one. Am I to far?

10-07-2003, 09:35 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	292 I6 wanted Looking for a 292 I6 within 150 miles of the Minneapolis/St Paul Minnesota area (will consider a little further drive if neccessary). Does not need to run but must be rebuildable and complete with all brackets, pulleys, etc... PM me or reply here if you have one and let me know what you are looking to get. I will come pick it up. Thanks - Jeff

10-11-2003, 06:25 PM	#2
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	292 I Have one in Al, complete running $200.00 __________________ Jock, Powder blasting shop, Alabama

10-11-2003, 09:09 PM	#3
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	If Jeff is not interested in it I might possibly be. Don't want anyone to think I am trying to hustle him out of a deal. :p What is it out of.......or is it still in a vehicle? I am gonna be that way on vacation next week and might could swing by there. I think my lowered truck could haul it back if I air the bags up to 75 lbs or so. Actually I am going to be in Gatlinburg but was thinking of heading to Tunica or possibly Biloxi so you would be kinda on the way. I notice Snead is kinda close to where I bought my GN from. Guy lived south of Birmingham I think. Car used to belong to Byron Bennett. If you are into Mustangs I am sure you know the name lol. I will be leaving out next Thursday morning very early so if I could know something by then it would help greatly. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

10-18-2003, 11:43 AM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	jacquesdean, If ItsNotABlazer isn't interested I will come pick it up? Do you happen to have any accessories with it/on it? What year model? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-20-2003, 01:03 AM	#7
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Chris go ahead and work out a deal with him. I have too many other things going right now so I wont be able to go ahead with this deal. Btw Chris I was through Birmingham earlier ...........probably 9ish Sunday morning. Was on my way home. Long drive from Southern TN to NE Texas with a 5 hour layover in a casino in Shreveport that yielded a net loss of $20 lol Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

10-12-2003, 08:24 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Brad, help yourself...Alabama is too far to travel. I really wish I could find one close by jacquesdean, thanks anyways...I am interested, you are just too far away. -Jeff

10-18-2003, 08:02 AM	#5
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,067	Have one available in Moneta, VA. It's a '65 292. Was a good running engine till a valve dropped. Has some piston top damage on one piston. Good engine for repair or rebuild. Will sell complete short block for $100 or complete engine less head for $200.

10-20-2003, 08:51 AM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Will do Brad. BTW, if you would have let me know, you could have dropped by and witnessed the Jimmy being cranked. Found out it apparently has a bad fuel pump. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-23-2003, 07:25 PM	#9
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	I might be able to get one. Am I to far? __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.