New Tubes Arrived today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1970 CST Short Wide** · 12-18-2021, 10:10 PM

My old tubes had a lot of dents and I wanted to replace them. Bigger is Better Right
Got them from American Classic Truck Parts. $100 less than Brothers

**LockDoc** · 12-18-2021, 11:46 PM

Quote:

Originally Posted by 1970 CST Short Wide

My old tubes had a lot of dents and I wanted to replace them. Bigger is Better Right
Got them from American Classic Truck Parts. $100 less than Brothers

I'll take a look at them. I either need to widen the ones I have or invest in a set of those for my Dually project. Did they fit pretty good?

LockDoc
.

**1970 CST Short Wide** · 12-19-2021, 12:25 AM

Quote:

Originally Posted by LockDoc

I'll take a look at them. I either need to widen the ones I have or invest in a set of those for my Dually project. Did they fit pretty good?

LockDoc
.

I haven’t actually mounted them yet but they look REALLY Good

**LockDoc** · 12-19-2021, 01:14 PM

Quote:

Originally Posted by 1970 CST Short Wide

I haven’t actually mounted them yet but they look REALLY Good

I see they are 16" wide. I will have to measure and see how much extra width I need. I estimated 3".

Thanks for posting them.

LockDoc

**1970 CST Short Wide** · 12-19-2021, 08:38 PM

Quote:

Originally Posted by LockDoc

I see they are 16" wide. I will have to measure and see how much extra width I need. I estimated 3".

Thanks for posting them.

LockDoc

This pic should help you see the difference

**LockDoc** · 12-19-2021, 09:54 PM

Quote:

Originally Posted by 1970 CST Short Wide

This pic should help you see the difference

I flipped the picture. I didn't get a chance to measure mine but I don't think I need one that much wider. Thanks.

LockDoc

**Getter-Done** · 12-19-2021, 11:35 PM

Quote:

Originally Posted by LockDoc

I flipped the picture. I didn't get a chance to measure mine but I don't think I need one that much wider. Thanks.

LockDoc

They are fairly easy to modify.
Just make sure you start cutting pass the curve.

Name: tub.jpg
Views: 494
Size: 43.8 KB

**1970 CST Short Wide** · 12-19-2021, 11:42 PM

Quote:

Originally Posted by LockDoc

I flipped the picture. I didn't get a chance to measure mine but I don't think I need one that much wider. Thanks.

LockDoc

Thanks for flipping the pic

**LockDoc** · 12-20-2021, 10:59 AM

Quote:

Originally Posted by Getter-Done

They are fairly easy to modify.
Just make sure you start cutting pass the curve.

Yeah, I have another set I can cut up but they need a little work.

Quote:

Originally Posted by 1970 CST Short Wide

Thanks for flipping the pic

No problem. Keep us updated on the fit when you bolt them in.

Thanks,
LockDoc

SCOTI · 12-20-2021, 02:44 PM

@LockDoc,

The aftermarket 'wider' tubs are 4" wider vs stock & are a common swap for the Squarebody guys w/duallys wanting to run the big semi style wheel conversions. A quick bolt-in too w/some minor floor mods (x2 sides). That seems it would be easier to cover up vs splicing two tubs together, body-working to a factory appearance, + top coat (x2 sides). I guess it depends on what you're working with though.

**Getter-Done** · 12-20-2021, 09:02 PM

Quote:

Originally Posted by 1970 CST Short Wide

My old tubes had a lot of dents and I wanted to replace them. Bigger is Better Right
Got them from American Classic Truck Parts. $100 less than Brothers

Those will look Great

**1970 CST Short Wide** · 12-21-2021, 01:30 AM

Quote:

Originally Posted by LockDoc

Yeah, I have another set I can cut up but they need a little work.

No problem. Keep us updated on the fit when you bolt them in.

Thanks,
LockDoc

Everything is cleaned up, just waiting on bolts. Had to cut old ones out and it was cheaper to wait for the LMC kit for $9.95 than hitting ACE. Anyway they are looking really good Fit wise. There is a bit of welding required to make the humps in the bed look correct (see pic) saw this on U Tube. As you can see my bed is not the Best. Have some undercoating ordered for the under side of the tubs. Will most likely do a line a Bed later, still debating
Anyway I’m happy with the fit and will post pics when All Done

71 super · 12-24-2021, 09:52 PM

Cooper restorations offers a set that are two inches wider than stock, should be here after Christmas, will post pictures when they arrive.

**1970 CST Short Wide** · 12-24-2021, 10:53 PM

Quote:

Originally Posted by 71 super

Cooper restorations offers a set that are two inches wider than stock, should be here after Christmas, will post pictures when they arrive.

I saw the 2” ones. But with me it’s bigger is better LOL. Looking forward to pics

**LockDoc** · 12-24-2021, 11:38 PM

-
Me too.

LockDoc

jondancer · 12-25-2021, 12:02 AM

Those are cool I didn’t know they made wide tubs

12-18-2021, 10:10 PM	#1
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,076	New Tubes Arrived today My old tubes had a lot of dents and I wanted to replace them. Bigger is Better Right Got them from American Classic Truck Parts. $100 less than Brothers Attached Images __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

12-20-2021, 02:44 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,923	Re: New Tubes Arrived today @LockDoc, The aftermarket 'wider' tubs are 4" wider vs stock & are a common swap for the Squarebody guys w/duallys wanting to run the big semi style wheel conversions. A quick bolt-in too w/some minor floor mods (x2 sides). That seems it would be easier to cover up vs splicing two tubs together, body-working to a factory appearance, + top coat (x2 sides). I guess it depends on what you're working with though. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-24-2021, 09:52 PM	#13
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: New Tubes Arrived today Cooper restorations offers a set that are two inches wider than stock, should be here after Christmas, will post pictures when they arrive. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

12-24-2021, 11:38 PM	#15
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,358	Re: New Tubes Arrived today - Me too. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-25-2021, 12:02 AM	#16
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,192	Re: New Tubes Arrived today Those are cool I didn’t know they made wide tubs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.