![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Coverlay install question
I bought a Coverlay dash cover. The PO had tried to recover the dash himself, with comical results (see pic).
I really like the look of the Coverlay and I'm getting ready to install. But the current vinyl cover is folded in a couple of places and a bit bulky under the cover. I am able to peel it off and be left with the foam padding intact. It might be better to install the cover over the foam so it would conform better, but I have not done it, and once you glue it, I assume you are pretty much "stuck" with it. Has anyone installed one and if so, has anyone done it over the foam? I did attempt to contact the Mfg, but they are closed for the day. They are very good about answering questions, but I am curious if anyone else has done this?
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
My dash pad was screwed down on the right side in 4 places. Is this the way it normally mounts?
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic Last edited by RedBed; 12-22-2017 at 12:31 AM. |
![]() |
![]() |
![]() |
#3 |
Post Whore
![]() ![]() Join Date: May 2015
Location: Alabama
Posts: 14,608
|
Re: Coverlay install question
got one in my truck...works and looks good...I'd strip that garbage off...the coverlay only contacts the old dash in a couple places. .read the instructions. .it shows you where to put the silicome adhesive...
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
After a little research it seems the 4 holes on the right side are normal. But the Coverlay does not have any holes in it, so I guess once it is on there is no removing the dash pad again unless you break the strip on the bottom?
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2017
Location: TX <--> MI
Posts: 279
|
Re: Coverlay install question
Yes the 4 screws on the right side is how it is supposed to be. I have never used a Coverlay but I did replace my old dash pad with a new one. The new one had 4 rectangular indentations for the 4 screws just like the factory one. You put the dash pad in and get it lined up and when you are happy, you use a pick or an awl to make the screw holes in the pad itself. Perhaps that is how you also do it with the Coverlay?
__________________
1978 GMC K25 1984 Chevy Scottsdale K10 built 350 4"lift - SOLD |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
|
Re: Coverlay install question
I did not install a Coverlay but I did install a competing brand of stick on cap. It was a disaster, though installed per mfg instructions. In HotZona 110+ degree heat it buckled and cracked all over the place. I had to remove it (and it took a lot of good foam and vinyl with it) and will be attempting to have a local upholsterer recover it. It might work in a nice cool climate like TX, but not AZ.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
|
Re: Coverlay install question
FWIW, the dash I got from Cheyenne was awesome and came with the clips already installed. A breeze to put in, and improved the interior of the truck 100%.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
Yep, ok. Coverlay is boxed up for return. Will be calling Cheyenne. Thanks!
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#9 | |
Senior Member
![]() Join Date: Oct 2014
Location: Ohio
Posts: 6,890
|
Re: Coverlay install question
Quote:
You will be happier with the new dash. And all you’ll have to do is install it. Post up pics when it’s back together!!
__________________
FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
Ordered the dash pad from Cheyenne, will post when installed!
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
|
Re: Coverlay install question
Personally, I would not install any plastic dash pad, even one that is all plastic. I think the metal frame of the original dash makes it worth a shot for recovering, and I will be trying that at an upholstery shop.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2005
Location: EAST TENNESSEE
Posts: 233
|
Re: Coverlay install question
You will love the dash from Cheyenne , best looking and fitting on the market.
__________________
1980 Silverado short bed 1993 GMC 1500 LS swap 2006 Lifted Z71 Crew Cab |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Oct 2017
Location: Hoover, Alabama
Posts: 15
|
Re: Coverlay install question
Has anyone ever paid an upholstery shop to recover a dash pad? Was thinking black leather with French seams would be sexy.
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
A custom would be nice, but I received and installed my Cheyenne dash pad, and it is BEE-YOO-TEE-FUL!
Once I am done with interior I will post pics. ![]()
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#15 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,919
|
Re: Coverlay install question
This is my Cheyenne pad that I installed last week
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
You guys were right. The Cheyenne dash pad is THE way to go. I am really happy with mine.
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#17 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,919
|
Re: Coverlay install question
Looks great!! I love mine too.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2014
Location: Swaledale, IA
Posts: 485
|
Re: Coverlay install question
Did your cheyenne dash drop right in? I got one that I believe was made by Dashes Direct a couple years ago - the install took many hours as it fit pretty poorly - had to cut a lot of material away to get it to sit flat on the dash and run a screw into the drivers side of the dash as it wanted to flare out.
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
It just slid right in, no trimming, no hassles. Came with the clips already installed. Actually it was one of the easiest jobs involving my interior refurb.
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
|
Re: Coverlay install question
|
![]() |
![]() |
![]() |
#21 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,919
|
Re: Coverlay install question
On mine (89 V3500) it didn't like my drivers side speaker. I had to modify the speaker mount. Other than that it was a easy installation and looks great. I would buy another one in a heartbeat. They cost a little more but in my opinion it's worth it.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Apr 2017
Location: TX
Posts: 254
|
Re: Coverlay install question
Yep. I am a notorious tightwad, and normally it works out, but occasionally, I "lose money by saving money".
The Coverlay is a great product if you have a stock, beat up dash. Looks good, easy install. But in my case, the dash had been recovered by a non-pro, and it looked like sh*t aside from making it unable to accept the Coverlay. I should have known this and gone with the Cheyenne dash in the first place. Would have saved me on return shipping... Live and learn... or not... heh heh. ![]()
__________________
1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Oct 2014
Location: Ohio
Posts: 6,890
|
Re: Coverlay install question
Both of those look awesome!!!
__________________
FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR |
![]() |
![]() |
![]() |
Bookmarks |
|
|