Anyone have pics of their rear air bag setup?

[Zumo]

I am gathering parts together to install my bags on the rear of my truck. It's a coils spring setup so any pics would help.

[abadsvt]

So are you lookin for ideas or more of how others have theres setup? Here is my setup which is a little different that you might be looking for but I am proud of my setup so i will post it anyways. So what kind of rear setup where you thinking about going? Trailing arms with bags? 4 link and bags? Anyways good luck with your project

[Zumo]

Wow. I am only able to go the basic route now, but that is awesome. I am basicly replacing the coil springs with bags.

Originally Posted by abadsvt

So are you lookin for ideas or more of how others have theres setup? Here is my setup which is a little different that you might be looking for but I am proud of my setup so i will post it anyways. So what kind of rear setup where you thinking about going? Trailing arms with bags? 4 link and bags? Anyways good luck with your project

[GWEE]

Originally Posted by abadsvt

So are you lookin for ideas or more of how others have theres setup? Here is my setup which is a little different that you might be looking for but I am proud of my setup so i will post it anyways. So what kind of rear setup where you thinking about going? Trailing arms with bags? 4 link and bags? Anyways good luck with your project

man i love that setup
tyhink im goin to do something like it

[jimmydean]

I don't have a pic. I tried to find one because I know 67Fleet posted one of his (mine is the same). I just replaced my coil with the Slam Specialties RE7 bag.

There is the long bolt from the bottom of the trailing arm to the center mounting hole on the bag. Then there is a hole on either side of the center in the top of the arm.

Then there are 2 mounting holes in the spring plate and the 1" hole for the fitting. The hardest part is the hole for the fitting.

<edit> as well you should be proud of that setup, Josh. It's awesome!

I think Zumo is on a budget for his shop rig though.

[Slammed67]

With bolt-in c-notch....

[Zumo]

Are you pretty happy with that setup. I plan on a bolt in C-notch as well, but later on. I want to get the bags up and running right now.

Originally Posted by Slammed67

With bolt-in c-notch....

[crispo-71]

Originally Posted by Slammed67

With bolt-in c-notch....

did u need a top braket for that setup...i know u need some on the front right??

[vin63]

Originally Posted by crispo-71

did u need a top braket for that setup...i know u need some on the front right??

Not necessary for the rear as Slammed67's photo illustrates. I run an upper mount on my rear air spring (photo below), so that I can route my air line under the frame rail. The front typically requires an upper mounting plate, which covers the upper coil spring pocket.

[crispo-71]

Originally Posted by vin63

Not necessary for the rear as Slammed67's photo illustrates. I run an upper mount on my rear air spring (photo below), so that I can route my air line under the frame rail. The front typically requires an upper mounting plate, which covers the upper coil spring pocket.

ohh ok so its fine if u put it under that c notch braket.... another question, did u have 2 change your tracking arm also?

[vin63]

Originally Posted by crispo-71

.... another question, did u have 2 change your tracking arm also?

Are you referring to the trailing arm? If so, no. I do have an adjustable panhard bar since my ride height is considerably lower than stock.

[jimmydean]

If you don't do the notch right now, the axle will be too close to the frame. I used a cup on the top that has a hole in the side for the hose. i will see if i can get a picture tonight.

With the 3" cup, at full dump the axle is resting on the factory bump stop. I will take the cup out once I get the notch installed and I trim my front cup.

The cups I used in the rear are the ones with a single bolt. I threaded the bolt and cut it down, it is mounted to the top spring retaining hole. Again, I will try and get a picture so it make sense.

[IMG]http://www.*****************/images/products/S10_Single_Port_Bolt_In_Front_Cups.jpg[/IMG]

[Zumo]

I have cups also. Thanks Jimmy.

[bagged74]

heres mine. I built new trailing arms to get a little more drop.

[64hotrod]

Where did you guys get your bags from? I want to order front and back but I want to make sure I order right the first time. Thanks for any info.

[jimmydean]

I would get everything from Suicide Doors if you are looking for a basic bag setup. The guys there know what they are doing and the price is the best I've found.

They have a "build your own kit" page that lets you pick everything but the brackets and fittings.

[n2billet]

Here's mine on my red 68, bags bolted directly to the frame and trailing arm, 2 inch blocks and welded in c-notch......

[SCOTI]

Zumo.... I might be able to help you get a 'budget' rear set-up going if you need some help. Budget means bags, DOT air line, & schrader valves for filling. Cheaper than the full nine yards & effective.

[SlammedDime]

Originally Posted by n2billet

Here's mine on my red 68, bags bolted directly to the frame and trailing arm, 2 inch blocks and welded in c-notch......

Forgive my ignorance on the early style trucks and why you guys do as you do, but based on that picture, it looks as if your axle is just about bottomed out in your notch, and the bag isn't fully compressed. Why not remove that 2" block to allow the bag to compress more and allow yourself to get more lift?

[jimmydean]

Originally Posted by SlammedDime

Forgive my ignorance on the early style trucks and why you guys do as you do, but based on that picture, it looks as if your axle is just about bottomed out in your notch, and the bag isn't fully compressed. Why not remove that 2" block to allow the bag to compress more and allow yourself to get more lift?

If I'm not mistaken, that bag is aired out about as far as it goes. The internal bump stops keep the bag from going too much flatter.

[Alvin]

Originally Posted by SlammedDime

Why not remove that 2" block to allow the bag to compress more and allow yourself to get more lift?

Also by running the 2" blocks you can achieve a ride height (set @ optimal bag height) that is 2" lower than if you didn't have the blocks.

In effect, your making use of the additional clearance provided by the c-notch all the time, and not just when you're aired out.

[SCOTI]

Without the block, to acheive a drop equal to 7" requires almost no air pressure in the bag which makes for a 'choppy' ride. By using the blocks for additional drop, you need more air in the bags getting closer to optimal pressures for the best over-all ride.

[SlammedDime]

Originally Posted by jimmydean

If I'm not mistaken, that bag is aired out about as far as it goes. The internal bump stops keep the bag from going too much flatter.

I've seen firestone bags compressed far more than that.

Originally Posted by Alvin

Also by running the 2" blocks you can achieve a ride height (set @ optimal bag height) that is 2" lower than if you didn't have the blocks.

In effect, your making use of the additional clearance provided by the c-notch all the time, and not just when you're aired out.

I do understand that, but perhaps I'm just used to seeing people wanting to get the most possible lift. Rarely do I see guys setting up their bags so that their ride height will be at the bags design height.

[64hotrod]

Thanks jimmydean, I'll check them out.

[poorboy]

What is the optimal pressue?