1960 short stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chopper john · 11-16-2009, 04:00 AM

back to life after 10 years of abandonment

monolith · 11-16-2009, 04:08 AM

Bada$$!!

I have GOT to get one of those early hoods for one of my rigs.

chopper john · 11-16-2009, 04:10 AM

thanks man

**slepysal** · 11-16-2009, 08:43 PM

NICE!!! how low did you slam it ?

19GMC63 · 11-16-2009, 09:56 PM

Sick!

scotts62 · 11-16-2009, 10:22 PM

Very cool!

More pics and specs on the drop if you want to add

chopper john · 11-16-2009, 10:34 PM

i step notched it .

62 Bowtie · 11-16-2009, 10:35 PM

stepsides rule

scotts62 · 11-16-2009, 10:41 PM

Quote:

Originally Posted by 62 Bowtie

stepsides rule

Ill have to agree with you there!

chopper john · 11-16-2009, 10:46 PM

the front is 68 thru 72 but someone did a spindle and disk brake kit with 1/2 ton coils cut 2 turns and removed bumpstops and bracket. rear is a 1996 chevy caprice rearend so its 4 wheel disc brake , with a step notch

chopper john · 11-16-2009, 10:48 PM

the rear fendes will sit on the floor when im done

scotts62 · 11-16-2009, 10:57 PM

If you plan on leaving 15's they will.

chopper john · 11-16-2009, 11:19 PM

yea im gonna run some 15 inch reverse cragars on 205/70/15 , right now i have 205/75/15s

scotts62 · 11-16-2009, 11:21 PM

That's cool, it will look good. Mine touches if i lift the front and leave the back slammed but the 20's to the bottom of the fenders keep it from going any farther.

chopper john · 11-16-2009, 11:56 PM

hey scotts 62
do you have a side view of you truck?

scotts62 · 11-17-2009, 08:51 AM

Quote:

Originally Posted by chopper john

hey scotts 62
do you have a side view of you truck?

Here is the best side view i have uploaded at the moment.

Another

chopper john · 11-17-2009, 12:08 AM

and it does run i drove it around for 2 months b4 i took it apart

chopper john · 11-17-2009, 02:07 AM

when i got it, it was 6 lug and i converted all to 5

*LILRED66* · 11-17-2009, 02:31 AM

Welcome to the forums from Kansas City, KS. Keep up the good work and keep us posted on your progress.

chopper john · 11-17-2009, 01:19 PM

thanks lil red ill keep it coming

chopper john · 12-31-2009, 07:10 PM

so i just install my drive shaft . i decided to keep it one piece. so i had to cut the top of the x frame . i got a 4 1/2 inch pipe welded it in the i plasma cut the flat piece on the frame

chopper john · 01-27-2010, 02:49 AM

check out my steering wheel i just picked up. its a 1961 chevy impala, the clicker for the turn signals is in the same place, and the horn meckanizm fit perfect, so even the horn works.

REDNOSE65 · 03-22-2010, 05:52 PM

Quote:

Originally Posted by chopper john

check out my steering wheel i just picked up. its a 1961 chevy impala, the clicker for the turn signals is in the same place, and the horn meckanizm fit perfect, so even the horn works.

That's cool man. I was out at a wrecking yard Saturday...muddy as hell though.
I have to go back. I was like a kid in Disneyland. Wrecking yards in Dallas suck...gotta go out of the city to find anything I need.
I found some things I want to get...Impala steering wheel is on top my list.

mckeagplm · 03-22-2010, 08:20 PM

RedNose65 Have you made it out by corsicana there are a bone yard way in the stix out there. Bumped into the guy at a show in dallas on 02 sometime.Been a couple years thou. Let me know if you know of any in south texas.

REDNOSE65 · 03-23-2010, 09:40 AM

Quote:

Originally Posted by mckeagplm

RedNose65 Have you made it out by corsicana there are a bone yard way in the stix out there. Bumped into the guy at a show in dallas on 02 sometime.Been a couple years thou. Let me know if you know of any in south texas.

No, I haven't made it out that way...not sure I've heard about it.
Been out the game for a minute...I was lucky to find the one I did...
Alot of good stuff!!!

11-16-2009, 04:00 AM	#1
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	1960 short stepside back to life after 10 years of abandonment Attached Images

11-16-2009, 04:08 AM	#2
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: 1960 short stepside Bada$$!! I have GOT to get one of those early hoods for one of my rigs. __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

11-16-2009, 04:10 AM	#3
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside thanks man

11-16-2009, 08:43 PM	#4
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 1960 short stepside NICE!!! how low did you slam it ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 11-16-2009 at 08:43 PM.

11-16-2009, 09:56 PM	#5
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: 1960 short stepside Sick!

11-16-2009, 10:22 PM	#6
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1960 short stepside Very cool! More pics and specs on the drop if you want to add __________________ Scott 93 crew cab build Project 62

11-16-2009, 10:34 PM	#7
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside i step notched it .

11-16-2009, 10:35 PM	#8
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: 1960 short stepside stepsides rule

11-16-2009, 10:46 PM	#10
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside the front is 68 thru 72 but someone did a spindle and disk brake kit with 1/2 ton coils cut 2 turns and removed bumpstops and bracket. rear is a 1996 chevy caprice rearend so its 4 wheel disc brake , with a step notch Attached Images

11-16-2009, 10:48 PM	#11
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside the rear fendes will sit on the floor when im done

11-16-2009, 10:57 PM	#12
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1960 short stepside If you plan on leaving 15's they will. __________________ Scott 93 crew cab build Project 62

11-16-2009, 11:19 PM	#13
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside yea im gonna run some 15 inch reverse cragars on 205/70/15 , right now i have 205/75/15s Last edited by chopper john; 11-16-2009 at 11:19 PM.

11-16-2009, 11:21 PM	#14
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1960 short stepside That's cool, it will look good. Mine touches if i lift the front and leave the back slammed but the 20's to the bottom of the fenders keep it from going any farther. __________________ Scott 93 crew cab build Project 62

11-16-2009, 11:56 PM	#15
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside hey scotts 62 do you have a side view of you truck?

11-17-2009, 12:08 AM	#17
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside and it does run i drove it around for 2 months b4 i took it apart Attached Images



Register or Log In To remove these advertisements.

11-17-2009, 02:07 AM	#18
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside when i got it, it was 6 lug and i converted all to 5

11-17-2009, 02:31 AM	#19
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 1960 short stepside Welcome to the forums from Kansas City, KS. Keep up the good work and keep us posted on your progress.

11-17-2009, 01:19 PM	#20
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside thanks lil red ill keep it coming

12-31-2009, 07:10 PM	#21
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside so i just install my drive shaft . i decided to keep it one piece. so i had to cut the top of the x frame . i got a 4 1/2 inch pipe welded it in the i plasma cut the flat piece on the frame Attached Images

01-27-2010, 02:49 AM	#22
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: 1960 short stepside check out my steering wheel i just picked up. its a 1961 chevy impala, the clicker for the turn signals is in the same place, and the horn meckanizm fit perfect, so even the horn works. Attached Images

03-22-2010, 08:20 PM	#24
mckeagplm Registered User Join Date: Feb 2010 Location: San Antonio Posts: 26	Re: 1960 short stepside RedNose65 Have you made it out by corsicana there are a bone yard way in the stix out there. Bumped into the guy at a show in dallas on 02 sometime.Been a couple years thou. Let me know if you know of any in south texas.

Register or Log In To remove these advertisements.