TX Parting 72 Cheyenne Super

[lynnfield]

72' cheyenne super, hit in the front end........unfortunately. The doors and tailgate have been sold locally. I have someone (local) interested in the complete 350 engine and trans, I will post in the thread if that changes. Front sway bar and auto linkage is no longer there either. I have a lot of pics and can get more, so please ask if interested. I will give each person 24 hours to respond before moving on to the next in line. Anything that is not listed and/or priced please ask and I will do so. I will do my best to respond in a timely manner, but please keep in mind, like most, I have a regular job, wife, and kids. Thanks, Greg

72' super bare cab in good shape w/title and glove box door SPID $600.00 (sold)
perfect wheel tubs $60.00 each (sold)
auto crossmember $50.00 +ship (sold)
door vent shades w/clips $30.00 shipped (sold)
bedsides $175.00 ea (sold)
near perfect front bed panel $100.00 (sold)
wiper arms $30.00 shipped
4 ralley wheels, tires, rings, & caps $100.00 (sold)
side markers $25.00 shipped
passenger fender (will need a small patch on the bottom cup area) $40.00
washer jar and bracket $20.00 shipped
brake booster and prop. valve, brackets, & rod, complete (sold)
auto column $70.00 +ship (sold)
decent driver carpet $65.00 shipped
after market seat (could use a cleaning) $40.00 (sold)
front disk set up $80.00 (sold)
5 lug rear, non posi, unknown gear $150.00 (sold)
lwb drive shaft w/ new carrier bearing $50.00
woodgrain dash (bezel cracked around screw holes) $40.00 shipped (sold)
pedal assy complete, cable, & carb bracket $38.00 shipped (sold)
driver quality cheyenne 10/super emblems both $25.00 shipped (sold)
driver quality 8/350 emblems both $18.00 shipped (sold)
upper 4 row radiator hold down both $18.00 shipped (sold)

[lynnfield]

More Pics

[classic1967chevy]

Originally Posted by lynnfield

More Pics

what do you want fo the seat shipped to 35578

[sharpie1972]

I'll take the gauges, glove box door if available, and the gas pedal/throttle assembly.
Add all knobs, lighter and 4 core hold downs if they are not bent.
Add the Cheyenne/Super emblems if there is no pitting.
Hard to tell in the pics if it's high hump. If so, interested in the bolt in hump.

Love the "Cheyenne Super Sport" SPID. Oh the myths that one has created!

Let the feeding frenzy begin!

Thanks, Sharpie

[sjarrett71]

Auto shifter linkage (complete)?
radio?
underdash harness (complete)?

[leddzepp]

I am interested in the rear taillight harness if it is in original shape and not cut up. Price shipped to 92503 please, whenever you get a chance.

[breeh]

Interested in brake booster setup pending shipping to 98045. Thanks.

[c1069]

Interested on rallys pending pics and shipping to 9325......0thanks

[sharpie1972]

Originally Posted by c1069

Interested on rallys pending pics and shipping to 9325......0thanks

Not 0**** but 0thanks! Good one! Sharpie

[crig39]

how much for transmission lines and vacuum line form trans to carb?

[HOTFUN]

Interested in the front bed panel and pair of wheel tubs shipped to 68467. No hurry. Thanks, Mark

[lynnfield]

Dennis (sharpie) lol, ya caught me in the middle of posting........again! It's a low hump, I'll get it all together and send an amount.

sjarrett71, auto linkage is gone, radio is a kraco brand I'll check to see if it works, dash harness I'll check and see when it comes out. semper fi

Davedr, I'll get some pics up

[makamer]

Do you have a jack, jack handle and tire iron?

[sjarrett71]

OK, thanks! Semper Fi!

[sharpie1972]

No problem, I combined my posts to clean up the thread. Thanks for the last parts lot, they were just as described! Sharpie

[lynnfield]

Also, Dennis I'm going to keep the glove box with the cab for now for the SPID, you will be first in line if that changes. Greg

[sharpie1972]

Makes sense. thanks for letting me know. Sharpie

[roughedup72]

how much for the ac control panel and wiring harness for it. dont need the cables or the panel. I really need just the bolts and the wiring harness but might take the whole unit pending price. Thanks, Troy

[astevens]

Hi,
Could you give me a price and shipping quote on the a/c duct work under the dash? My zip code is 26301. Thanks.
Aaron

[Davedr]

Might also need the fender well for the passenger side.

[lynnfield]

Ok, I'm back, got threatened if I didn't come eat dinner

Davedr, The disc brakes.........the one thing I had no pics of, here ya go! The rotors have plenty of meat on them and the pads look good too.

[67chevy1series]

hi my name is rick and i am wondering if this truck or you have , the e brake bracket that connects the trailling arm e brake to the cable ,i would need one of those and there are two hooks for the front i need both of those and there are two brackets that bolt to the frame and the cable goes through them i need those two as well do you have those?

[lynnfield]

chexswb, pm'ed me about the gas cap, I don't think its what you are looking for.

leddzepp, I'll check the condition and get back to you

breeh, you are second in line, I'll get you a quote if the other guy passes

c1069, I think there is a missing number in your zip, Are you wanting tires and all shipped?

crig39, I think the trans lines have been cut for an after market cooler. How's $15.00 shipped on the vacuum line? I'll check on the other

hotfun, Mark I'll get you a shipping quote when they come off (may be a day or two)

[c1069]

No its there 0

[1967BBC10]

would like to get the steering column how much shipped to 28681 Thanks C