KS saved it from scrap 69 gmc, some decent parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-30-2011, 08:58 PM

It was headed there till I saved it, not a whole lot but some, first pics of what it looked like then the later ones are when parts are off with some prices. Thanks Randy

teeitup · 01-30-2011, 09:00 PM

1111111

teeitup · 01-30-2011, 09:03 PM

2222222

teeitup · 01-30-2011, 09:12 PM

33333333

teeitup · 01-30-2011, 09:14 PM

44444444

teeitup · 01-30-2011, 09:16 PM

55555555

*ksjh1316* · 01-30-2011, 09:03 PM

Randy gauges or tach in this one? Black center belt? How bad are the front springs? One las thing I need one good red taillight

RIDDLA · 01-30-2011, 09:16 PM

Would you happen to have any rear taillight quarter panels?

Husker · 01-30-2011, 09:17 PM

What is the Passenger fender like?
Thanks
Ron

67gmcstepside · 01-30-2011, 09:31 PM

I could use the arm rests, door handles and mirror. Shipping to NJ 08527

Husker · 01-30-2011, 09:38 PM

I take it you had Nice weather there?
Ron

*ksjh1316* · 01-30-2011, 10:16 PM

I will take the lens and the GMC caps you wouldn't happen to have a good gauges circuit board I fried mine this weekend working on the dash let me know shipping to 67218

*ksjh1316* · 01-30-2011, 10:23 PM

No problem not in a hurry stay warm we are going to get smacked with the cold starting mon night

rich67 · 01-31-2011, 12:06 AM

are all 4 rims matching? if so what it take to buy them randy? lmk rich

**68350** · 01-31-2011, 02:17 AM

How much for the steering wheel shipped to 59701? What size is it, 13"? thanks

67chevy1series · 01-31-2011, 02:49 AM

wait is that a spare tire holder for in the bed of a fleetside if so how mucho shipped to 95301

Jessechop · 01-31-2011, 07:30 AM

The Dana 60 is 8 Lug I assume? Any idea on shipping to 04769 buisness address?

Hard On Parts · 01-31-2011, 02:47 PM

Randy
I need drivers side lower shock mount plate(under trailing arm), Door panels and front bumper brackets shipped to 67024.

Is the bed decent? How much for it?

Are you going to the Wichita Swap Meet this weekend? If so I could meet you there with cash in hand. Would like the rear window if you are.

Hard On Parts · 01-31-2011, 04:50 PM

What about the bed?
Posted via Mobile Device

teeitup · 01-31-2011, 04:59 PM

70blazerx2, sounds good THANKS for the info
hard on parts, bed is junk, real rusty and floor is real wavy
Thanks Randy

CaptRMW · 01-31-2011, 05:47 PM

Randy how much for the heater control? Is it missing the center lever or knob? Thanks Roger

teeitup · 01-31-2011, 08:57 PM

picssssssssss

teeitup · 01-31-2011, 08:59 PM

llllllllllo

teeitup · 01-31-2011, 09:01 PM

nbbmbm

teeitup · 01-31-2011, 09:04 PM

lkpopko

01-30-2011, 08:58 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	saved it from scrap 69 gmc, some decent parts It was headed there till I saved it, not a whole lot but some, first pics of what it looked like then the later ones are when parts are off with some prices. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:00 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 1111111 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:03 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 2222222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:12 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 33333333 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:14 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 44444444 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:16 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 55555555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2011, 09:03 PM	#7
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: saved it from scrap 69 gmc, some decent parts Randy gauges or tach in this one? Black center belt? How bad are the front springs? One las thing I need one good red taillight Last edited by ksjh1316; 01-30-2011 at 09:28 PM.

01-30-2011, 09:16 PM	#8
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	Re: saved it from scrap 69 gmc, some decent parts Would you happen to have any rear taillight quarter panels? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

01-30-2011, 09:17 PM	#9
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,213	Re: saved it from scrap 69 gmc, some decent parts What is the Passenger fender like? Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

01-30-2011, 09:31 PM	#10
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: saved it from scrap 69 gmc, some decent parts I could use the arm rests, door handles and mirror. Shipping to NJ 08527 Last edited by 67gmcstepside; 01-30-2011 at 09:32 PM.

01-30-2011, 09:38 PM	#11
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,213	Re: saved it from scrap 69 gmc, some decent parts I take it you had Nice weather there? Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

01-30-2011, 10:16 PM	#12
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: saved it from scrap 69 gmc, some decent parts I will take the lens and the GMC caps you wouldn't happen to have a good gauges circuit board I fried mine this weekend working on the dash let me know shipping to 67218 Last edited by ksjh1316; 01-30-2011 at 10:16 PM.

01-30-2011, 10:23 PM	#13
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: saved it from scrap 69 gmc, some decent parts No problem not in a hurry stay warm we are going to get smacked with the cold starting mon night

01-31-2011, 12:06 AM	#14
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: saved it from scrap 69 gmc, some decent parts are all 4 rims matching? if so what it take to buy them randy? lmk rich

01-31-2011, 02:17 AM	#15
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: saved it from scrap 69 gmc, some decent parts How much for the steering wheel shipped to 59701? What size is it, 13"? thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi



Register or Log In To remove these advertisements.

01-31-2011, 02:49 AM	#16
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: saved it from scrap 69 gmc, some decent parts wait is that a spare tire holder for in the bed of a fleetside if so how mucho shipped to 95301

01-31-2011, 07:30 AM	#17
Jessechop Registered User Join Date: Sep 2003 Location: maine Posts: 191	Re: saved it from scrap 69 gmc, some decent parts The Dana 60 is 8 Lug I assume? Any idea on shipping to 04769 buisness address?

01-31-2011, 02:47 PM	#18
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: saved it from scrap 69 gmc, some decent parts Randy I need drivers side lower shock mount plate(under trailing arm), Door panels and front bumper brackets shipped to 67024. Is the bed decent? How much for it? Are you going to the Wichita Swap Meet this weekend? If so I could meet you there with cash in hand. Would like the rear window if you are.

01-31-2011, 04:50 PM	#19
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: saved it from scrap 69 gmc, some decent parts What about the bed? Posted via Mobile Device

01-31-2011, 04:59 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts 70blazerx2, sounds good THANKS for the info hard on parts, bed is junk, real rusty and floor is real wavy Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2011, 05:47 PM	#21
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: saved it from scrap 69 gmc, some decent parts Randy how much for the heater control? Is it missing the center lever or knob? Thanks Roger

01-31-2011, 08:57 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts picssssssssss Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2011, 08:59 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts llllllllllo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2011, 09:01 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts nbbmbm Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2011, 09:04 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: saved it from scrap 69 gmc, some decent parts lkpopko Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.