CA WTB/WTT:Drivers-Side Bucket Seat Track - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1968k20** · 07-14-2017, 08:51 PM

Got some buckets out of a 70 Panel. They are going in my 71Suburban(factory bucket option), but the d/s right slider holes don't match up to the factory holes in the floor. If I don't find one, I may drill holes in the floor. I do have some Blazer sliders/ seats for trade. Don't want to sell the Blazer stuff until I finish this project.

72chevynut · 07-15-2017, 09:54 AM

Can you get a measurement between the front mounting holes to the rear ones? I may have the brackets.

**1968k20** · 07-15-2017, 10:12 AM

Quote:

Originally Posted by 72chevynut

Can you get a measurement between the front mounting holes to the rear ones? I may have the brackets.

I will do that. Thank you!

**richard2717** · 07-15-2017, 10:17 AM

Lisa,
This is just a guess without seeing them but the buckets out of the panel are probably utility buckets with metal backs and your suburban floor is probably set up for sport buckets. If that is the case I am not sure the utlities will fit without floor hole mods but i could be wrong.

**1968k20** · 07-15-2017, 01:22 PM

Quote:

Originally Posted by richard2717

Lisa,
This is just a guess without seeing them but the buckets out of the panel are probably utility buckets with metal backs and your suburban floor is probably set up for sport buckets. If that is the case I am not sure the utlities will fit without floor hole mods but i could be wrong.

Thanks Richard. It looks like all I need is the d/s right slider. I will measure later and let you guys know. They do have metal backs on them.

**1968k20** · 07-15-2017, 04:16 PM

Dimensions

**1968k20** · 07-15-2017, 04:18 PM

More dimensions

72chevynut · 07-15-2017, 05:25 PM

Thanks for the pics, that helps. Your suburban is setup for sport buckets. The blazer driver side sport bucket brackets you have should fit these holes. Unfortunately the blazer sport bucket bracket won't fit your utility seats that you have taken out of the panel. Also the utility seat brackets won't line up with your suburban mounting holes. Your two options are, drill new holes in floor for the utility seat brackets or find sport bucket seats. All suburbans I've seen with sport buckets had the solid mounts for passenger side seat, like trucks. Same seat sliders as blazers, trucks on driver side. They also have the plastic back covers like blazers. One good thing is you already have the under floor cross member brace for the front mounts. You may want to relocate the rear under floor braces to match up with the new drilled holes if you decide to use the utility seats. If you decide to sell the blazer driver side bracket, let me know. I would be interested.

07-14-2017, 08:51 PM	#1
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	WTB/WTT:Drivers-Side Bucket Seat Track Got some buckets out of a 70 Panel. They are going in my 71Suburban(factory bucket option), but the d/s right slider holes don't match up to the factory holes in the floor. If I don't find one, I may drill holes in the floor. I do have some Blazer sliders/ seats for trade. Don't want to sell the Blazer stuff until I finish this project. __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

07-15-2017, 09:54 AM	#2
72chevynut Registered User Join Date: Jan 2014 Location: Mt.Sterling, KY Posts: 673	Re: WTB/WTT:Drivers-Side Bucket Seat Track Can you get a measurement between the front mounting holes to the rear ones? I may have the brackets. __________________ Michael

07-15-2017, 10:17 AM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,908	Re: WTB/WTT:Drivers-Side Bucket Seat Track Lisa, This is just a guess without seeing them but the buckets out of the panel are probably utility buckets with metal backs and your suburban floor is probably set up for sport buckets. If that is the case I am not sure the utlities will fit without floor hole mods but i could be wrong. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-15-2017, 04:16 PM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: WTB/WTT:Drivers-Side Bucket Seat Track Dimensions Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

07-15-2017, 04:18 PM	#7
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: WTB/WTT:Drivers-Side Bucket Seat Track More dimensions Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

07-15-2017, 05:25 PM	#8
72chevynut Registered User Join Date: Jan 2014 Location: Mt.Sterling, KY Posts: 673	Re: WTB/WTT:Drivers-Side Bucket Seat Track Thanks for the pics, that helps. Your suburban is setup for sport buckets. The blazer driver side sport bucket brackets you have should fit these holes. Unfortunately the blazer sport bucket bracket won't fit your utility seats that you have taken out of the panel. Also the utility seat brackets won't line up with your suburban mounting holes. Your two options are, drill new holes in floor for the utility seat brackets or find sport bucket seats. All suburbans I've seen with sport buckets had the solid mounts for passenger side seat, like trucks. Same seat sliders as blazers, trucks on driver side. They also have the plastic back covers like blazers. One good thing is you already have the under floor cross member brace for the front mounts. You may want to relocate the rear under floor braces to match up with the new drilled holes if you decide to use the utility seats. If you decide to sell the blazer driver side bracket, let me know. I would be interested. __________________ Michael



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.