NM Sway bar mounting brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 04-13-2024, 04:48 PM

Great shape. Bolt on, not riveted
25.00 plus ship

**kev2809** · 04-15-2024, 06:58 PM

hey michael, do you know what size bar this bracket uses?

**michael bustamante** · 05-28-2024, 11:43 PM

They were mounted to the 1.25" bar

**kev2809** · 05-29-2024, 11:05 AM

thats the thicker bar right? trying to see if i can find a way to mount them to my LCA's, have drop cups welded in and they plated the underside!

**michael bustamante** · 05-29-2024, 03:50 PM

What I did was run the sway bar inside the frame bracket instead of hanging underneath the frame bracket. Works great amd tucked the bar in closer to the chassis. If your frame is boxed in where this mounts, ypu might have to weld them on

**kev2809** · 05-29-2024, 06:41 PM

well these mounts are no problem, its where the sway bar mounts to the LCAs. they bolt through the top of the LCA...hmmm

ill take them and figure out the rest later, im sure someone has ran a swaybar with plated bottoms. whats the shipping to 77471?

**kev2809** · 05-29-2024, 06:42 PM

also, do you have any pictures of the setup you mentioned?

**michael bustamante** · 05-29-2024, 10:12 PM

Shipping would be 13.25. Fed ex. Pics are with an oem sway bar you are probably thinking of an aftermarket bar from helwig. I have a set of front and rears for sale too

**michael bustamante** · 05-29-2024, 10:15 PM

Helwig front and rear sway bar for coil spring rear. These have flattened ends to take sway bar links. 1.5 in the front and 3" in the rears I'm pretty sure. I dont have links but they're available in most lengths at Napa I'm sure
200 for the pair plus ship

**70STOVEBOLT** · Yesterday, 07:42 PM

Would you sell the rear bar separately? If so how much shipped to 46590?

**kev2809** · Today, 12:15 PM

i may be interested in that front bar as well if i can figure out how to mount these to my plated control arms!

04-13-2024, 04:48 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Sway bar mounting brackets Great shape. Bolt on, not riveted 25.00 plus ship Attached Images __________________ 1967custom

04-15-2024, 06:58 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Sway bar mounting brackets hey michael, do you know what size bar this bracket uses? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-28-2024, 11:43 PM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Sway bar mounting brackets They were mounted to the 1.25" bar __________________ 1967custom

05-29-2024, 11:05 AM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Sway bar mounting brackets thats the thicker bar right? trying to see if i can find a way to mount them to my LCA's, have drop cups welded in and they plated the underside! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-29-2024, 03:50 PM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Sway bar mounting brackets What I did was run the sway bar inside the frame bracket instead of hanging underneath the frame bracket. Works great amd tucked the bar in closer to the chassis. If your frame is boxed in where this mounts, ypu might have to weld them on __________________ 1967custom

05-29-2024, 06:41 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Sway bar mounting brackets well these mounts are no problem, its where the sway bar mounts to the LCAs. they bolt through the top of the LCA...hmmm ill take them and figure out the rest later, im sure someone has ran a swaybar with plated bottoms. whats the shipping to 77471? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-29-2024, 06:42 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Sway bar mounting brackets also, do you have any pictures of the setup you mentioned? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-29-2024, 10:12 PM	#8
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Sway bar mounting brackets Shipping would be 13.25. Fed ex. Pics are with an oem sway bar you are probably thinking of an aftermarket bar from helwig. I have a set of front and rears for sale too Attached Images __________________ 1967custom

05-29-2024, 10:15 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Sway bar mounting brackets Helwig front and rear sway bar for coil spring rear. These have flattened ends to take sway bar links. 1.5 in the front and 3" in the rears I'm pretty sure. I dont have links but they're available in most lengths at Napa I'm sure 200 for the pair plus ship Attached Images __________________ 1967custom

Yesterday, 07:42 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,235	Re: Sway bar mounting brackets Would you sell the rear bar separately? If so how much shipped to 46590? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Today, 12:15 PM	#11
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,139	Re: Sway bar mounting brackets i may be interested in that front bar as well if i can figure out how to mount these to my plated control arms! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.