Time to do front pads on the hoe. a few questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 03-12-2007, 11:55 PM

Well it is time to do the front pads on the 2000 NBS tahoe. I was wondering if you could tell me the size of the caliper torque drive bolts? are they a 45? or a 50?(been a long tiem and i don't have the right one need to buy one) Also The pads were done the last time we did the rotors which was at about 86k. The tahoe now has around 110k on it do you think we should have the rotors turned or just put new pads on? I know that we are supposed to check for clearances and all.
Thanks for any help you can give my father and I.

03-12-2007, 11:55 PM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,745	Time to do front pads on the hoe. a few questions Well it is time to do the front pads on the 2000 NBS tahoe. I was wondering if you could tell me the size of the caliper torque drive bolts? are they a 45? or a 50?(been a long tiem and i don't have the right one need to buy one) Also The pads were done the last time we did the rotors which was at about 86k. The tahoe now has around 110k on it do you think we should have the rotors turned or just put new pads on? I know that we are supposed to check for clearances and all. Thanks for any help you can give my father and I. __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.