Guys with desk top dyno... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72PicKuPmAn · 05-06-2002, 05:18 PM

I was wonder if you could do a motor combo for me. 355 stock crank and rods, .125 dome pistons running 9.38:1 with stock 625 heads 76cc 1.94/1.5 valves, 1.5 rockers, cam - hyd. 224 at .050" and .460 lift intake and exhaust, topped off with a RPM intake and 1406 carb with headers and dual 2.5" with 40 series flow masters to the rear axle. I think this is all.

Thanks
Taylor

------------------
'72 S/S Chevy- in progress

'99 S-10 Ext. Cab 2.2 5 speed- something to drive while I fix the '72

05-06-2002, 05:18 PM	#1
72PicKuPmAn Registered User Join Date: Feb 2000 Location: Gassville, AR Posts: 246	Guys with desk top dyno... I was wonder if you could do a motor combo for me. 355 stock crank and rods, .125 dome pistons running 9.38:1 with stock 625 heads 76cc 1.94/1.5 valves, 1.5 rockers, cam - hyd. 224 at .050" and .460 lift intake and exhaust, topped off with a RPM intake and 1406 carb with headers and dual 2.5" with 40 series flow masters to the rear axle. I think this is all. Thanks Taylor ------------------ '72 S/S Chevy- in progress '99 S-10 Ext. Cab 2.2 5 speed- something to drive while I fix the '72 __________________ '72 S/S Chevy- in progress



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.