Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-06-2009, 02:56 AM | #11 |
Parts Hunter
Join Date: Oct 2006
Location: Sacramento
Posts: 247
|
Re: Project 67 GMC custom 6.5 turbo diesel
I got the drivers side of the engine compartment fairly finished up. I had to massage the inner a little to clear the air intake piping. I made a little bracket for the engine oil cooler hoses. I had to relocate the wiring and I'll clean that up before I'm done. I installed my engine temp and oil pressure gauges just to find out my oil pressure gauge needs to be replaced. I have another pod on top of the dash with a vacuum gauge in it and a hole for the boost gauge when it shows up. More on that later. Trans still does not shift right so I'm hoping that I just have to fiddle with the throttle position sensor a little more, or dink around with the vacuum pump......you know the easy stuff. I did a couple laps around the block and the temp got up to 195 and just stayed there. It was 100 degrees out. Once the truck warmed up I got very little black smoke and it felt strong.
__________________
1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922 |
Bookmarks |
|
|