Noob brake question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drivea55 · 10-29-2009, 02:15 AM

Hey guys,
Please be patient with me here as this is the first build for me...

I am new to the master cylinder being under the floor pan, I replaced all the lines and wheel cylinders and now need to bleed the brakes...

Do I open the little plastic cover on top of the master and bleed accordingly like say a 70's series car or is there a different way of doing this? is this a tiny reservoir ? doesn't look like it holds enough fluid to bleed the system out?

do i use dot3 etc...

thanks in advance everyone...

thanks
Brian

10-29-2009, 02:15 AM	#1
drivea55 Registered User Join Date: Oct 2009 Location: Monson,MA Posts: 503	Noob brake question Hey guys, Please be patient with me here as this is the first build for me... I am new to the master cylinder being under the floor pan, I replaced all the lines and wheel cylinders and now need to bleed the brakes... Do I open the little plastic cover on top of the master and bleed accordingly like say a 70's series car or is there a different way of doing this? is this a tiny reservoir ? doesn't look like it holds enough fluid to bleed the system out? do i use dot3 etc... thanks in advance everyone... thanks Brian __________________ current project; 1950 GMC "Junk Yard Dawg" http://67-72chevytrucks.com/vboard/s...d.php?t=635960 ___________________________________________ SOLD to "ONEBADFIVEFIVE" http://67-72chevytrucks.com/vboard/s...d.php?t=436406 Last edited by drivea55; 10-29-2009 at 02:35 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.