|
02-13-2010, 06:38 PM
|
#1 |
|
'70 C-10 Primer
Join Date: Dec 2008
Location: nevada,missouri
Posts: 117
|
Brakes
The brake redal on my 70 just suddenly went to the floor. The master cyl was still full so I assumed it was bad. Replaced it, no difference. Won't pump up. The flood level stays the same.,Traced the lines and wheel cyls, no leaks. Bleed them, no air. In fact when I bleed them, there is almost no pressure, Manual brakes. I'm stumped. When I bench bled the master cyl. pressure seemed normal.
Last edited by rusty baker; 02-13-2010 at 06:41 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode