![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2008
Location: Tennessee
Posts: 35
|
Yukon 2dr 2wd Project Thread
I figured that I would post a project thread here because many people showed interest and comments when I posted pictures a while back, and I am always open to comments and suggestions.
A few of these pictures might be out of place on the whole project timeline but the general idea should be achieved I think. It started out as a 1992 GMC Yukon 2dr 4wd with the Bright blue metallic and silver 2 tone as in this picture.... ![]() Then eventually around the 2002 era I shaved it and painted a few things inside but it was still my daily driver so I didnt go to extensive with it. ![]() ![]() ![]() Then around 2006 I decided that since I had a perfectly good garage and a new daily driver that it was time to start on the neverending project. My intention was to make it a 2wd that lays frame on 22's with a powerful but street friendly motor. In order to change it from 4wd to 2wd I needed to swap out the frame to one that could take the 2wd components, the way I did this was to take a 2wd 4 door Tahoe frame front half and then mate it up with the original back half. |
![]() |
![]() |
Bookmarks |
|
|