Bone Stock 350 Upper kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72tutone** · 10-19-2010, 04:05 PM

To my knowledge this is a bone stock rebuilt 350. I have no idea the bore over size.
I can tell you it even retains the rochester Qjet 4bbl on it.

Will I be able to use this kit for this motor? 350 in it now with a TH350 LWB.

http://www.jegs.com/i/GM-Performance...96#moreDetails.

I know there is alot of discussion in regards to the vortec heads, but I didnt know if you can match that up with the block I have.

I would think with a mild cam xe268h or so that it would run decent.

Motor does have an HEI distrib.

Thoughts?

10-19-2010, 04:05 PM	#1
72tutone Senior Member Join Date: May 2010 Location: St.Louis Posts: 635	Bone Stock 350 Upper kit To my knowledge this is a bone stock rebuilt 350. I have no idea the bore over size. I can tell you it even retains the rochester Qjet 4bbl on it. Will I be able to use this kit for this motor? 350 in it now with a TH350 LWB. http://www.jegs.com/i/GM-Performance...96#moreDetails. I know there is alot of discussion in regards to the vortec heads, but I didnt know if you can match that up with the block I have. I would think with a mild cam xe268h or so that it would run decent. Motor does have an HEI distrib. Thoughts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.