The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-16-2010, 07:53 PM   #1
dandansuperman
Registered User
 
dandansuperman's Avatar
 
Join Date: Jun 2010
Location: Vernal, Utah
Posts: 62
Project black-ops

I have wanted a 1970 C10 for 10 years now. I finally made the decision to go for broke and find my truck. I live in Utah, so finding a rust free truck under $10,000 is about inmpossible. I searched far and wide for months before finally finding my truck in Bellevue, Nebraska. I got a great buy on the truck, so I convinced my buddy Mike to go with me on the 2 day journey to get it. Outside of Cheyenne, Wyoming we got caught in a hail storm that destroyed Mike's Duramax. Luckily his insurance company took care of the damage or I would still feel bad. It was quite an adventure getting to Nebraska but finally I loaded up my dream truck and came home to Utah. We pulled it home on a trailer because the previous owner (Rick) said it had been sitting for a few years in his garage. Rick built the truck for the track and the engine and transmission only had 500 miles on them. I purchased the truck for $7000 dollars which I feel was a steal. There is a little rust starting to show on the bottoms of the doors and the passenger floor brace. The truck fired right up and runs like a champ. This truck will smoke the tires right off the rims if I am not careful. The transmission shifts way hard and about throws my poor wifes head through the back window, but remember it is a work in progress. I wanted to start a build thread so I can share my passion with everyone on this board. Heres a little info about the truck I have found out:

1970 Chevrolet C10 2WD SWB

(All this information is from the previous owner who put a lot of time and money into the truck before I bought it.)

Previous owners: Cape Gerardo MO, Wentzville MO, Lake Saint Louis MO, and Bellevue NE

Engine:

Engine Block Casting Number: 3970010 (1968-1979) 2&4 Bolt Main
Truck Hi-perf
The engine was carefully engineered to be a street-able 375-400 hp
The engine was blueprinted and balanced with 9.5:1 compression.
The heads were opened up to 2.02 intakes
1.86 exhaust with hard seats installed so that pump fuel can be run.
Heads were ported and smoothed.
The engine had a high lift cam installed (5/8 race cam)
1:1.5 roller rocker arms installed.
The timing chain is a double roller.
The oil and fuel pump is a stock Z-28 spec unit.
Intake is a Holley 750 double pumper vacuum secondary’s.
Long Tube Headers
New heavy duty 4 core radiator


Transmission:

TH 400 Rebuilt
3,500 RPM Stall Converter
Transm (shift kit added)

Suspension/Drive:

Springs were replaced with stock ones.
A frame bushings, Ball Joints and tie rod ends were all replaced.
12 Bolt Rear End with stock Posi Track
New U-Joints
Balance Drive Shaft


Brakes:

Brake cylinders were rebuilt
Rotors were turned and new brake shoes installed.
Master cylinder was replaced
Used power booster was added to give the truck power brakes.


Body:

Rocker panels replaced
Moldings removed and holes filled
Stake pockets welded up
Body stripped to bare metal
All body filler removed
Truck was primed and painted with 8 coats of enamel black
4 coats were buffed off to create a clear coat shine
Bed was sprayed with enamel clear coat
Interior and under hood was painted
New front bumper
New rear bumper

Interior:

New door moldings
New windshield
New cardboard tank cover
New glove box cardboard
New duct work
New rubber floor mat
New dash pad
Seat was recovered
Attached Images
     
dandansuperman is offline   Reply With Quote
 

Bookmarks

Tags
1970, black, c10, fleetside, swb


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com