1997 gmc sas and other stuff.

[rocking chevy]

Ok so I finally started on my pickup, actually the sas is almost done. I would have posted pictures awhile ago but I didn't have my computer.

Here it is when I got it. Except for the primer spots, It had a couple of dents that I got fixed.


Then I put a two inch block in it, cranked the torsion bars, and got some different rims and tires really cheap.


Then the work begins.10 bolt out.



14 bolt in, and changing gears. I added a leaf in the rear, and put in a five and a half inch block.


IFS crap out.



We got a sas kit from off road direct. Front spring hanger in.


Rear spring mounts, and springs in.


Dual shock hoops.


Front axle. dana 60.


Then replaced everything on the front axle.


Front axle in and shocks on.


I put a two inch spacer on the rear and a half inch on the front. Which made the rear 72 inches wide, and the front 71 and a half. so the front is only a half inch narrower.


Heres what it looks like now. with 35 inch tall tires, and 16 inch rims.



I also found a tonneau cover for only 80 dollars, heres the best pic I have of it.


Heres it parked beside my jeep, which also has 35 inch tall tires on it, there about the same height.