CPP Drop Spindle Special

[Scottshotrods]

Originally Posted by 58chevy3600

Evening Justin,

Well I have a couple of questions. First off, we have a 1958 Chevy Apache we are building, with a 77 Front clip. We have Airbagit bags on it and also have 2.5" drop spindles from Airbagit. We have stock tie rod ends, stock calipers, stock "A" arms.

We are wanting to put Wheel Vintiques 13 Series Smoothie Wheels (16X8, 5'BS) on it, and have two wheels, with one with a tire mounted, but when we put the wheel on the spindle, the tie rod end drags on the wheel. We figured the extra inch would help clearance, since others say stock wheels will fit the 2.5" drops, but they don't. We have the original stock wheels too.

So we are interested in the Modular 2" drop spindles, because that sounds like the fix for our problem, and we will sell the 2.5" spindles we have.

Would appreciate your comments. Also a quote for a set of 2" drop modular Spindles, shipped to 75075.

Thanks for your time.

Jim

p/m sent

Justin