Rocker Replacement Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 12-26-2015, 02:55 PM

Need some advice/info.

I'm replacing parts of my floor, along with inner and outer rockers with the cab supports aswell.

The dilema is, we cannot find if there is a piece that goes for the door seal seam, on the outer rocker it seems you could just bend the piece over and youd have the seam, but inspection of the other sides original pieces, it seems theres a piece that the door seem folds over.

So is there a piece that goes behind the outer rocker that joins with the door seam? Or do we just fold that part of the rocker over? I've looked for hours and found nothing.

1970 C10.

12-26-2015, 02:55 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 844	Rocker Replacement Question Need some advice/info. I'm replacing parts of my floor, along with inner and outer rockers with the cab supports aswell. The dilema is, we cannot find if there is a piece that goes for the door seal seam, on the outer rocker it seems you could just bend the piece over and youd have the seam, but inspection of the other sides original pieces, it seems theres a piece that the door seem folds over. So is there a piece that goes behind the outer rocker that joins with the door seam? Or do we just fold that part of the rocker over? I've looked for hours and found nothing. 1970 C10. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.