70 ignition sw ?

[lutronjim]

What exactly does the switch cut off when in the crank position? Trying to document wiring that was changed with my LS install.

The LS pink wire that wants ignition switch on is plugged into the switch on portion of my fuse block.

I think originally the crank position sent 12v to solenoid and a wire from there went to coil to provide full 12v for cranking. The switch also provided less than 12v directly to coil when on and not cranking via resistance wire. I would assume the resistance wire was still 'hot' when cranking.

Don't understand why it wasn't hooked up to the regular circuit going to coil sans the resistance wire.

Does anyone have a pin out picture of the switch showing what each terminal was used for.

Thanks