Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-05-2021, 10:21 AM | #1 |
Registered User
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
|
Sanding grits on bare metal before primer and after
Ok, so I am by no means anything close to a body guy but I have a very basic knowledge and like to lwarn, so with that said I have done all the rust repair and such and now I getting ready for 1st coat of primer/sealer. To start off I had the truck sand blasted so I am working with metal. I have repaired all the holes and rust areas and now I am getting it ready for the high bond primer/sealer.
1.) My question is what grit sandpaper to use on the bare metal areas before spraying the primer/sealer? 2.) After I get the primer on I will be using Dry Guide coat and looking for issues, use a cream filler as needed and then for final sanding what grit of paper do you use? I will be applying a single stage urethane Satin Red
__________________
John 3:16 - Saved me... God Bless |
Bookmarks |
|
|