Previous owner '68

[raggedjim]

Originally Posted by jaros44sr

Nice work on the fender, but I found it easier to over tighten till the nut snapped off

In my younger years I was laid off along with 500,000 other people and pissed at the world so I came up with idea to build my work shop, dug the foundation with pick and shovel, wheel barrow....polish backhoe

Poured foundation and .learned how to lay cinder blocks when my boiler went out in the house I had them put a zone in for my work shop, 70 degrees all the time

Been enjoying it for 50 years

Good luck on your project I'll be following

Thanks Jim, I've been watching your blazer build for almost as long as I've been on the site! Sorry to hear about your son.

I wish I had built my shop earlier but I don't know how much I would have really used it. Before I retired I worked quite a bit and was always on call 24/7. It was a relief to finally be able to retire, no more phone calls at 2:30 in the morning! Now the shop is my M-F 9:00-6:00.

I'll try your method on the second fender, hopefully it's easier!