72 C10 Transfer case torque mount

[Dicky1]

Pulled my TH350/205 Tcase to clean up and do all seals/bearings as required. Reinstalling everything and all went together easily all bolts going back in with fingers …. EXCEPT for the 2 bolts in the torque plate.. the holes in the Tc and the plate are at least 3/4” out line…I realize being a torque plate it may be somewhat out of line so rubbers maybe have a little pressure. I don’t recall a whole lot of pressure on the 2 bolts that go into the case when I removed them.
Why are my pictures always uploaded 1/4 turn out ?