Gen 3 Drive By Wire cruise control HOW TO

[reaper71]

Ok, back with some news.
I hooked up the new switch (Rostra style from Dad) and wired in the relay for the led taillights. Everything seemed to be working properly (had to replace the brake switch) it was not working consistently. drove the truck and cruise will not "set" I then started to test things out and the green (set/coast) wire from the switch gets power when you turn on the switch when you slide the "set" button it loses power. slide resume has power etc.

So, the picture I have posted below shows how I have it wired "open switch" and I think this may be a "closed switch" per the instructions for testing via rostra if I have the relay wired wrong let me know so I can correct it (I am SO close to having this whipped) I am heading upto Springfield in the Morning so will need to fix it when I get home.

Thanx

Mark