Power Window Project DIY 64-66 TRUCK

[seifer]

My power window mod is here...
http://www.c10australia.com.au/forum...uot-Pedro-quot

Still working on the switch.

[short n wide 72]

[short n wide 72]

Motors did not come with the brackets pictured.

[kieth]

My brother is making (with a stero lithograph printer) copies of the metal bracket required to adapt the 9 tooth power window unit. 10-12 of these will be available for free prototype testing. Only charge will be for postage....first come first served. Call or text 918-630-4665------email kieth.ruleco@hotmail.com

[LDO]

Email sent.

[kieth]

Originally Posted by kieth

My brother is making (with a stero lithograph printer) copies of the metal bracket required to adapt the 9 tooth power window unit. 10-12 of these will be available for free prototype testing. Only charge will be for postage....first come first served. Call or text 918-630-4665------email kieth.ruleco@hotmail.com

update, guy who digitizes the part has been on vacation. Will get started on bracket this week. Kieth

[88k5jimmy]

Originally Posted by kieth

update, guy who digitizes the part has been on vacation. Will get started on bracket this week. Kieth

Kieth

Did you find takers for your prototype testing?

UPDATED VIDEO;

https://www.youtube.com/watch?v=h9_7...ature=youtu.be

this shows my install of the retro window crank handle from Auto Loc; ALso my complaining of the PRICE!!! $100 per side; and the thing BINDS when engaged! What a low end piece of garbage, IMHO.

Speaking of low end pieces of garbage, you will see the other set of retro crank switches I bought, from Dannys Rod Shop on EBAY. these have a knurled shaft that does not even close fit my handles. My guess, fits 67-72. My loss, $139 gone.

In any case, the pass window is done on inside, now I need to run wires to ignition fused and GND.

BTW, does anyone know a good pass through that I can shuttle wires from cab to door? Something nice? I saw a spring with great mount for door and cab, wires ran through spring, I am sorry I did not buy when saw....

further, I have video coming where I do actual modification of regulator and mount motor to it for prep for drivers door, coming in next day or so.

Lastly, I may give you a sneak peak at a new product I am testing out, is a solid state module that will add one-touch express window up/down and power door lock control, also has receiver and transmitter fob for remote entry.

Steve

Any updates on window switch after the Auto Loc one? What about wiring routing update?

[Steve Van Gent]

Steve

Any updates on window switch after the Auto Loc one? What about wiring routing update?


********************************************************

Sorry, been distracted. No, sadly, the Auto Loc switch is best I have found. I dont think a DIY version will work the way I want with the time I am willing to invest. I would love it if someone would work that angle;

On the routing, I ran wires as inconspicuously as I could, but I will be re-running them soon and post an update.

Lastly, for Express up and down, I am testing a module for a friend that is in beta design phase right now; it is programmable and one use is for power windows; This one has been programmed for use in a vehicle with retro handles; Is very cool what user can do with OEM old school handle! I will post details once install is complete and pretty.

[The Rocknrod]

Originally Posted by kieth

update, guy who digitizes the part has been on vacation. Will get started on bracket this week. Kieth

I email you this weekend for info on that bracket.

[Sick5]

ok who has the parts list?? lol