Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-09-2023, 04:32 PM | #51 | |
Registered User
Join Date: Oct 2015
Location: PNW
Posts: 3,615
|
Re: 1953 chevy 1100 gigis truck
Quote:
I understand what you are saying, sometimes if I do something "just for now" it may remain that way. I hope you are having some fun on this and it can remind you of good times. I can't believe how well that yellow paint came up - hopefully you can keep it. |
|
12-09-2023, 09:54 PM | #52 | |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Quote:
Since the tires just rub now, I fiqured if I went could go to a narrower tire and do some other mods I would gain a comfortable clearance to the fenders so I know I for sure won’t be any bigger of a tire. Since being 22 in rims options are limited especially if I don’t want to spend $1000 a tire. What I’ll ate it’ll end up with is a 29 inch tall and 9 inches wide hopefully won’t look to small in the big opening and also have the benefit of being closer to the ground I like threads with lots of pics so trying to do the same! |
|
12-09-2023, 10:00 PM | #53 | |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Quote:
|
|
12-09-2023, 10:46 PM | #54 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1953 chevy 1100 gigis truck
have you seen this site for tire sizes and comparing a cojuple tires next to each other? there are tabs to check out other stuff.
https://tiresize.com/comparison/ |
12-09-2023, 10:51 PM | #55 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1953 chevy 1100 gigis truck
another handy visual tool if you plan to swap offsets. also has spots to put your fender clearances etc
https://www.wheel-size.com/calc/ |
12-10-2023, 12:50 AM | #56 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Yes I have used the tire size calculator, the second one is net. I don’t plan to swap off set off.
|
12-10-2023, 10:23 AM | #57 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1953 chevy 1100 gigis truck
curious, what are the wheels from, a donor or aftermarket?
|
12-10-2023, 11:13 AM | #58 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
|
12-10-2023, 11:17 AM | #59 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1953 chevy 1100 gigis truck
oh, ok. i've seen those before at the dealer but never connected the dots. the dealers scrap those wheels but that may be a GM policy or something. I heard they are not road legal, is that a thing or just something the GM parts guys tell you so they can sell more spendy wheels?
|
12-10-2023, 05:32 PM | #60 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
The dealers are so pose to scrap them as there is no dot number on them. Have seems lots of truck run them, gm most likely didn’t want to pay extra to get them certified if they were just going to be scrap
|
12-11-2023, 12:42 AM | #61 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Ran into a fitment issue when test fitting the hood. Flipped the hood over and didn’t realize there is a hood brace that is now interfering with the firewall.
Too late to move the firewall so I moved the brace out and it seemed to add some rigidity to the hood. Also got the motor and trans pulled out of the frame, hope to take the frame into work and give it a wash before I start to shorten the wheel base Last edited by Rickysnickers; 12-11-2023 at 07:49 AM. |
12-11-2023, 12:46 AM | #62 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1953 chevy 1100 gigis truck
Been awhile since I was under the hood of an AD. is that where the hinges bolt up? You could always do a front flip hood.
|
12-11-2023, 11:32 PM | #63 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
The hinges bolt to the mount the springs bolted to the brace that I moved but I was looking at doing something other than the springs
|
12-12-2023, 12:05 PM | #64 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 834
|
Re: 1953 chevy 1100 gigis truck
I kept my hinges, but removed the springs and installed prop rods.
The hood sits very flat on the cowl now, without the springs. Just a suggestion
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
12-14-2023, 12:13 AM | #65 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Yeah I was also thinking of that, I think I’ve looked through your thread your truck looks very familiar. I also found Lsfab.com they make some mounts to convert it to gas shocks
|
12-14-2023, 09:15 AM | #66 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,088
|
Re: 1953 chevy 1100 gigis truck
110% jealous of the firewall stretch, something i thought a lot about earlier on. that extra foot well would be MONEY
|
12-18-2023, 01:13 AM | #67 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Had a productive couple of days! Set up and got the frame shortened, I needed to get the drive shaft mocked up so I can figure out the trans tunnel. Got some firewall done before I put the cab back on the frame
There was a pile of dirt in the frame Last edited by Rickysnickers; 12-18-2023 at 11:12 AM. |
12-30-2023, 12:36 AM | #68 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Got some good progress on the floor done the last couple days
Hoping to get the sheet metal done by the end of January so I can get the interior and firewall painted |
01-28-2024, 01:55 AM | #69 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Been a while since ann update, have been working a couple hours here and there. Got both kick plates done, got my pedals and steering column mocked up. Front end/rad support partial mounted.
Swapped out the front lower control arms swapped out for 2wd ones, will get some better pictures of of what i did to the front end. Last edited by Rickysnickers; 01-28-2024 at 11:14 AM. |
01-28-2024, 01:58 AM | #70 |
Registered User
Join Date: Dec 2012
Location: manitoba
Posts: 94
|
Re: 1953 chevy 1100 gigis truck
Last edited by Rickysnickers; 01-28-2024 at 11:15 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|