Billet Radio Plate for cut dash...opinions? - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave38 · 11-12-2008, 12:02 AM

I need one as well. How much for a polished radio bezel shiped to 40108?

greystoke · 11-12-2008, 12:47 AM

I would be interested in this item as well. I would be glad to do the finishing on it myself.

Dano

Rreemo · 11-12-2008, 10:16 PM

I wouldn't be so quick on this fellas....looks like I'm about to have to submit a Paypal dispute myself. I paid promptly back on 10/29 (2 weeks ago), and still have received nothing. Not even as much as a response saying if and when the item would ship out....I paid him, then he went dark...never heard from him again!

No item, no replies to PM's or emails....just silence for $93! Ouch!!

mahanian · 11-13-2008, 12:05 AM

Quote:

Originally Posted by Rreemo

I wouldn't be so quick on this fellas....looks like I'm about to have to submit a Paypal dispute myself. I paid promptly back on 10/29 (2 weeks ago), and still have received nothing. Not even as much as a response saying if and when the item would ship out....I paid him, then he went dark...never heard from him again!

No item, no replies to PM's or emails....just silence for $93! Ouch!!

Sorry I haven't gotten back to you sooner, I haven't been on the internet in over a week. I've been super busy at work and these bezels are just a side hobby for me. Your bezel is boxed up and ready to ship, but if you'd rather have a refund I will gladly refund your money. I've sold 40 or so of these and haven't had a single complaint, other than a bit of a delay from time to time. If I was a business I could guarantee a quick turn-around, but the cost would be much higher to cover the overhead of a business. Again, sorry for the delay. Let me know if you still want the bezel.

Thanks

rodstored-72 · 11-13-2008, 11:27 AM

i know mahanian,
and i will tell you that he is a straight up guy. if he has not gotten back to you, it is as he has said. he does not do this to make money he loves these trucks! i have seen these bezels in person & i promise they are worth atleast what he has asked, if not more. he takes a lot of time to finish them to a mirror finish. i understand the anciness wanting these, please be patient & he will for sure get it to you if still wanted. i have not bought one, only because it is not what i am doing on my interior. if i was needing to i would buy it with no hesitations what so ever. i just wanted to share my experience of him & to give a nuetral (hope) opinion on this situation.

just my 0.02 cents.....

Rreemo · 11-13-2008, 01:29 PM

Of course I would still like to have it.

I understand and can appreciate that this is not a business, but how hard would it have been to just send a simple email or PM once you have a mans money....or at least set expectations up front that there would be a delay? If you would have just said it would take a couple weeks up front I would have been entirely cool with that, but total silence for 2 weeks after you've been paid just seems unacceptable to me....especially these days when it's already risky to do business over the internet.

If it's not shipping out in the next day or so just issue a refund...I'll figure something else out.

Can you confirm shipping - Please?

Thanks.

Rreemo · 11-13-2008, 01:35 PM

...and also don't mean to come across as an a$$. I'm sure this is a nice item, I'm just disappointed that I obviously won't be able to install it again this weekend.

Thanks again.

mahanian · 11-13-2008, 05:35 PM

The bezel will be in the mail today via Priority Mail. You should have it Saturday or Monday.

Thanks

Rreemo · 11-13-2008, 10:05 PM

Quote:

Originally Posted by mahanian

The bezel will be in the mail today via Priority Mail. You should have it Saturday or Monday.

Thanks

Thanks for the response.

Rreemo · 11-17-2008, 09:48 PM

Just FYI - no bezel yet.

98turbls1 · 11-13-2008, 06:19 PM

These look really good... Looking to be getting one off of you soon.

*Shane* · 11-19-2008, 05:57 PM

I don't think it's a matter of advertising as much as it is selling.

If you are gonna continue to take orders then you should re-up your vendor status.

orangek5 · 11-19-2008, 09:54 PM

sent pm

orangek5 · 11-22-2008, 10:04 PM

Mahanian Sent PM

*Ozona* · 11-23-2008, 11:10 AM

Installed mine yesterday. Damn nice. Honestly couldn't be any better!

67ChevyRedneck · 11-25-2008, 11:34 PM

I got mine yesterday, very nice piece! I'm excited about installing it! Hopefully this weekend

tinlid · 11-26-2008, 04:17 PM

Mahanian Sent PM

Cheyenne Dan · 12-16-2008, 04:21 AM

Mahanian, You have a p.m. Thanks, Dan

bdydrp97s10 · 12-20-2008, 05:00 PM

dont think hes selling these anymore ive sent him a few pms over hte last month or two and i get no response

mahanian · 12-22-2008, 01:17 PM

Sorry for not getting back to everyone, it's been a difficult and busy time for me the past month. I have a few bezels left and I'm going to pay for a month vendor subscription so I can sell them. I've been so busy that I decided to have them polished by a third party so they are all ready to ship. I will respond to each PM in the order I've received them over the past month. Thanks for the patience!

blazer72 · 03-12-2009, 04:42 PM

Quote:

Originally Posted by mahanian

Sorry for not getting back to everyone, it's been a difficult and busy time for me the past month. I have a few bezels left and I'm going to pay for a month vendor subscription so I can sell them. I've been so busy that I decided to have them polished by a third party so they are all ready to ship. I will respond to each PM in the order I've received them over the past month. Thanks for the patience!

Some people need to practice reading and comprehension. He's obviously busy and aware of the rule, and planning on doing the right thing.

Cheyenne Dan · 12-22-2008, 09:10 PM

Great, put me in line for a polished radio bezel! Thanks, Dan

orangek5 · 12-26-2008, 04:42 PM

My radio plates came in today thank you for designing/making them they are a great improvement for a cut dash

Thanks

Danny

lowdownstar · 12-26-2008, 08:28 PM

can i get one as well?

thanks Ray

nac593 · 01-04-2009, 10:54 AM

Anymore left? It would be so cool to have one, but it looks I might be to late.

11-12-2008, 12:02 AM	#1
dave38 Registered User Join Date: Dec 2007 Location: Brandenburg, ky Posts: 23	Re: Billet Radio Plate for cut dash...opinions? I need one as well. How much for a polished radio bezel shiped to 40108?

11-12-2008, 12:47 AM	#2
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: Billet Radio Plate for cut dash...opinions? I would be interested in this item as well. I would be glad to do the finishing on it myself. Dano

11-12-2008, 10:16 PM	#3
Rreemo Registered User Join Date: Oct 2005 Location: North Texas Posts: 179	Re: Billet Radio Plate for cut dash...opinions? I wouldn't be so quick on this fellas....looks like I'm about to have to submit a Paypal dispute myself. I paid promptly back on 10/29 (2 weeks ago), and still have received nothing. Not even as much as a response saying if and when the item would ship out....I paid him, then he went dark...never heard from him again! No item, no replies to PM's or emails....just silence for $93! Ouch!! __________________ 72' LWB Cheyenne 73' Camaro Z28/RS 70' Chevelle RagTop 00=ss=00

11-13-2008, 11:27 AM	#5
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,978	Re: Billet Radio Plate for cut dash...opinions? i know mahanian, and i will tell you that he is a straight up guy. if he has not gotten back to you, it is as he has said. he does not do this to make money he loves these trucks! i have seen these bezels in person & i promise they are worth atleast what he has asked, if not more. he takes a lot of time to finish them to a mirror finish. i understand the anciness wanting these, please be patient & he will for sure get it to you if still wanted. i have not bought one, only because it is not what i am doing on my interior. if i was needing to i would buy it with no hesitations what so ever. i just wanted to share my experience of him & to give a nuetral (hope) opinion on this situation. just my 0.02 cents.....

11-13-2008, 01:29 PM	#6
Rreemo Registered User Join Date: Oct 2005 Location: North Texas Posts: 179	Re: Billet Radio Plate for cut dash...opinions? Of course I would still like to have it. I understand and can appreciate that this is not a business, but how hard would it have been to just send a simple email or PM once you have a mans money....or at least set expectations up front that there would be a delay? If you would have just said it would take a couple weeks up front I would have been entirely cool with that, but total silence for 2 weeks after you've been paid just seems unacceptable to me....especially these days when it's already risky to do business over the internet. If it's not shipping out in the next day or so just issue a refund...I'll figure something else out. Can you confirm shipping - Please? Thanks. __________________ 72' LWB Cheyenne 73' Camaro Z28/RS 70' Chevelle RagTop 00=ss=00

11-13-2008, 01:35 PM	#7
Rreemo Registered User Join Date: Oct 2005 Location: North Texas Posts: 179	Re: Billet Radio Plate for cut dash...opinions? ...and also don't mean to come across as an a$$. I'm sure this is a nice item, I'm just disappointed that I obviously won't be able to install it again this weekend. Thanks again. __________________ 72' LWB Cheyenne 73' Camaro Z28/RS 70' Chevelle RagTop 00=ss=00

11-13-2008, 05:35 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? The bezel will be in the mail today via Priority Mail. You should have it Saturday or Monday. Thanks

11-17-2008, 09:48 PM	#10
Rreemo Registered User Join Date: Oct 2005 Location: North Texas Posts: 179	Re: Billet Radio Plate for cut dash...opinions? Just FYI - no bezel yet. __________________ 72' LWB Cheyenne 73' Camaro Z28/RS 70' Chevelle RagTop 00=ss=00

11-13-2008, 06:19 PM	#11
98turbls1 Registered User Join Date: Nov 2008 Location: Moore, OK Posts: 16	Re: Billet Radio Plate for cut dash...opinions? These look really good... Looking to be getting one off of you soon.

11-19-2008, 05:57 PM	#12
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Billet Radio Plate for cut dash...opinions? I don't think it's a matter of advertising as much as it is selling. If you are gonna continue to take orders then you should re-up your vendor status.

11-19-2008, 09:54 PM	#13
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Billet Radio Plate for cut dash...opinions? sent pm

11-22-2008, 10:04 PM	#14
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Billet Radio Plate for cut dash...opinions? Mahanian Sent PM

11-23-2008, 11:10 AM	#15
Ozona Account Suspended Join Date: Jan 2006 Location: Fort Worth Posts: 155	Re: Billet Radio Plate for cut dash...opinions? Installed mine yesterday. Damn nice. Honestly couldn't be any better!

11-25-2008, 11:34 PM	#16
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Billet Radio Plate for cut dash...opinions? I got mine yesterday, very nice piece! I'm excited about installing it! Hopefully this weekend __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 11-25-2008 at 11:34 PM.

11-26-2008, 04:17 PM	#17
tinlid Registered User Join Date: Nov 2008 Location: Englewood, CO Posts: 95	Re: Billet Radio Plate for cut dash...opinions? Mahanian Sent PM



Register or Log In To remove these advertisements.

12-16-2008, 04:21 AM	#18
Cheyenne Dan Registered User Join Date: Oct 2005 Location: Millington Tennessee Posts: 200	Re: Billet Radio Plate for cut dash...opinions? Mahanian, You have a p.m. Thanks, Dan

12-20-2008, 05:00 PM	#19
bdydrp97s10 Registered User Join Date: Dec 2007 Location: Johnson City TN Posts: 570	Re: Billet Radio Plate for cut dash...opinions? dont think hes selling these anymore ive sent him a few pms over hte last month or two and i get no response __________________ My build thread--http://67-72chevytrucks.com/vboard/s...d.php?t=300333

12-22-2008, 01:17 PM	#20
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? Sorry for not getting back to everyone, it's been a difficult and busy time for me the past month. I have a few bezels left and I'm going to pay for a month vendor subscription so I can sell them. I've been so busy that I decided to have them polished by a third party so they are all ready to ship. I will respond to each PM in the order I've received them over the past month. Thanks for the patience!

12-22-2008, 09:10 PM	#22
Cheyenne Dan Registered User Join Date: Oct 2005 Location: Millington Tennessee Posts: 200	Re: Billet Radio Plate for cut dash...opinions? Great, put me in line for a polished radio bezel! Thanks, Dan

12-26-2008, 04:42 PM	#23
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: Billet Radio Plate for cut dash...opinions? My radio plates came in today thank you for designing/making them they are a great improvement for a cut dash Thanks Danny __________________ 1970 Jimmy 4x4 IL6 1971 Jimmy 4x4 350ci v8 1971 SWB 327ci v8 1972 Short Stepside 305ci v8 1972 Blazer 2WD CST LS9 350ci 4sp 1999 4 Door LB 1 Ton Old Body Style 5.7 v8

12-26-2008, 08:28 PM	#24
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: Billet Radio Plate for cut dash...opinions? can i get one as well? thanks Ray

01-04-2009, 10:54 AM	#25
nac593 Registered User Join Date: Sep 2007 Location: san diego,ca Posts: 125	Re: Billet Radio Plate for cut dash...opinions? Anymore left? It would be so cool to have one, but it looks I might be to late.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.