Parting out a 58 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jsbgump · 12-01-2005, 02:58 PM

I have a 58 big back glass long step I am parting out.

Rear window $100
Spare tire carrier $30
Factory Motorola transistor radio $100
Instrument cluster $50
original seat $25

http://pg.photos.yahoo.com/ph/jsbgum...lbum?.dir=543b

Just let me know what you might need I am using the motor and trans rear end and front suspension. Everything else is up for grabs.

qksilver · 12-01-2005, 11:27 PM

I need doors ............ I have a few pairs but I want some that are straight and no rust thru.
Pm me if yours fit that discription.
Thanks,
Steve

jsbgump · 12-02-2005, 12:38 AM

The doors are not very good passenger door has some rust holes that are small. THE DRIVERS DOOR IS BENT UP FROM HITTING THE FRONT FENDER FOR YEARS

qksilver · 12-02-2005, 10:26 AM

sounds like the ones I have.............
Thanks,
Steve

jsbgump · 12-02-2005, 02:11 PM

No problem Steve Thanks for looking

CAL 58 GMC · 12-02-2005, 06:59 PM

jsbgump, I asked about the window sash for both sides last week. Did you check yet? Thanks, Dave.

jsbgump · 12-03-2005, 02:44 AM

there are none on this truck

CAL 58 GMC · 12-03-2005, 09:31 AM

jsbgump, here's the parts I need. I thought that maybe after seeing what I was talking about you might have it. Thanks, Cal 58 GMC.

jsbgump · 12-03-2005, 12:31 PM

They appear to be in good shape. I do not have the doors striped yet. I will let you know as soon as I get them off.

CAL 58 GMC · 12-04-2005, 08:57 AM

okay, thanks!

jsbgump · 12-08-2005, 05:29 PM

ttt

72addict · 12-11-2005, 09:23 PM

any pics of the radio? is it complete with all knobs and speaker?

**HOTFUN** · 12-11-2005, 10:20 PM

How bad is that cab itself? How is the lower hinge pockets floor and the roof above the windshield area inside and out? Would it have a factory armrest on the drivers door? Do you have any of the original 15 inch wheels with the clips?

jsbgump · 12-12-2005, 01:53 AM

The cab has a lot of rust.cab corners above back window floor pans etc. No arm rest. I have about 10 orginal 6 ligs but no caps.

jsbgump · 12-14-2005, 09:42 PM

I have a link to pics at the top of the thread. The knobs are gone as well as the speaker. All that was left was the radio.I can get more pics of he radio if you want them.

Quote:

Originally Posted by 72addict

any pics of the radio? is it complete with all knobs and speaker?

bassfisher · 12-18-2005, 11:25 PM

Hi do you have the wiper tranmission believe thats what it is call the part that the wiper arm attaches to and goes the wall? Does it have the tube on the side for washer fluid and would it fit on a 57? Passenger side is what I need. Thanks Brian

jsbgump · 12-22-2005, 07:33 PM

I will look at it I have the wiper linkage off so I will take a look

jsbgump · 12-31-2005, 04:17 PM

ttt

bassfisher · 12-31-2005, 11:17 PM

Quote:

Originally Posted by jsbgump

ttt

Was that for me? sorry what does that mean?

pebbleboy · 12-31-2005, 11:24 PM

Quote:

Originally Posted by bassfisher

Was that for me? sorry what does that mean?

TTT= to the top

moving a thread to the top of the fourm so more people will see it

BTW what are the bullet holes from?

jsbgump · 01-02-2006, 02:11 PM

I have the drivers side out. the passenger sides were trash they were all bent up by po. Ill get a shipping quote for ya

Quote:

Originally Posted by CAL 58 GMC

jsbgump, I asked about the window sash for both sides last week. Did you check yet? Thanks, Dave.

jsbgump · 01-02-2006, 02:12 PM

I have a possible buyer for the rest of the truck here local I'll keep yall posted. I will have a update on this entire thread on wed/thr with pics and what is left over

12-01-2005, 02:58 PM	#1
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Parting out a 58 I have a 58 big back glass long step I am parting out. Rear window $100 Spare tire carrier $30 Factory Motorola transistor radio $100 Instrument cluster $50 original seat $25 http://pg.photos.yahoo.com/ph/jsbgum...lbum?.dir=543b Just let me know what you might need I am using the motor and trans rear end and front suspension. Everything else is up for grabs. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 Last edited by jsbgump; 12-06-2005 at 11:53 AM.

12-01-2005, 11:27 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Parting out a 58 I need doors ............ I have a few pairs but I want some that are straight and no rust thru. Pm me if yours fit that discription. Thanks, Steve

12-02-2005, 12:38 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 The doors are not very good passenger door has some rust holes that are small. THE DRIVERS DOOR IS BENT UP FROM HITTING THE FRONT FENDER FOR YEARS __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-02-2005, 10:26 AM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Parting out a 58 sounds like the ones I have............. Thanks, Steve

12-02-2005, 02:11 PM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 No problem Steve Thanks for looking __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-02-2005, 06:59 PM	#6
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Parting out a 58 jsbgump, I asked about the window sash for both sides last week. Did you check yet? Thanks, Dave.

12-03-2005, 02:44 AM	#7
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 there are none on this truck __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-03-2005, 09:31 AM	#8
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Parting out a 58 jsbgump, here's the parts I need. I thought that maybe after seeing what I was talking about you might have it. Thanks, Cal 58 GMC. Attached Images Last edited by CAL 58 GMC; 12-03-2005 at 09:32 AM.

12-03-2005, 12:31 PM	#9
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 They appear to be in good shape. I do not have the doors striped yet. I will let you know as soon as I get them off. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-04-2005, 08:57 AM	#10
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Parting out a 58 okay, thanks!

12-08-2005, 05:29 PM	#11
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 ttt __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-11-2005, 09:23 PM	#12
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	Re: Parting out a 58 any pics of the radio? is it complete with all knobs and speaker? __________________ 1957 Cameo

12-11-2005, 10:20 PM	#13
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,142	Re: Parting out a 58 How bad is that cab itself? How is the lower hinge pockets floor and the roof above the windshield area inside and out? Would it have a factory armrest on the drivers door? Do you have any of the original 15 inch wheels with the clips? __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 12-11-2005 at 10:22 PM.

12-12-2005, 01:53 AM	#14
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 The cab has a lot of rust.cab corners above back window floor pans etc. No arm rest. I have about 10 orginal 6 ligs but no caps. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-18-2005, 11:25 PM	#16
bassfisher Registered User Join Date: May 2005 Posts: 61	Re: Parting out a 58 Hi do you have the wiper tranmission believe thats what it is call the part that the wiper arm attaches to and goes the wall? Does it have the tube on the side for washer fluid and would it fit on a 57? Passenger side is what I need. Thanks Brian



Register or Log In To remove these advertisements.

12-22-2005, 07:33 PM	#17
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 I will look at it I have the wiper linkage off so I will take a look __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-31-2005, 04:17 PM	#18
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 ttt __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

01-02-2006, 02:12 PM	#22
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Parting out a 58 I have a possible buyer for the rest of the truck here local I'll keep yall posted. I will have a update on this entire thread on wed/thr with pics and what is left over __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

Register or Log In To remove these advertisements.