kp components weld in step notch - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72slam · 12-05-2006, 12:34 PM

I'm going to try and post a pic for the first time, bear with me. Didn't work.

ok, that worked. Guess I need to work on sizing. What size do youz guyz usually use? Thanks

72slam · 12-05-2006, 12:53 PM

Trying again

el curioso · 12-05-2006, 01:58 PM

hey 72slam did you paint the whole rotor or is that just an illusion the camera gives??

P.S looking great hope to be there soon.

72slam · 12-05-2006, 02:11 PM

The face of the rotors are taped up. I wanted to paint the center and outer edge.

BigShoe24 · 12-05-2006, 03:04 PM

I was wondering if anyone has tried the CPP Trailing Arm Kit or the Crossmember thats made for lowered applications? Im wanting to run them and was hoping for a little feed back before ordering them. I'm planning on mounting my bags in front of the rear end and to crossmember on front of my notch. Any suggestions? Thanks

blazntn · 12-12-2006, 08:07 PM

Ok will this notch layout on a 29" tire? All the pics look like it doesnt have enough clearance. I am about to get one but if it doesnt lay I will have to find something else!

bagged74 · 12-12-2006, 10:30 PM

Quote:

Originally Posted by blazntn

Ok will this notch layout on a 29" tire? All the pics look like it doesnt have enough clearance. I am about to get one but if it doesnt lay I will have to find something else!

Nope, you will probably have to get a regular 10" step notch and bend it to fit.

67Fleet · 01-14-2007, 09:13 PM

How many of you guys that have installed the KP notch had to trim it down? I just unpacked mine and the top piece looks like it is going to have to be trimmed quite a bit.

sweet572 · 01-14-2007, 10:07 PM

i didnt have to trim any part of the notch

blazntn · 01-15-2007, 11:57 AM

Man I talked to KP and they will make larger notches. The top piece does hang over. YOu will need to trim it to get a smooth look.

Frizzle Fry · 06-14-2007, 03:30 PM

any updates?

**ChiefRocka** · 06-17-2007, 10:36 AM

Anybody heard from Clint ?? Is he even still around ??

John

blazntn · 06-17-2007, 05:14 PM

I dont believe he works with KP anymore. But, I am not totally sure about that.

67Fleet · 06-17-2007, 06:37 PM

I thought I saw a few posts of his in another thread in the suspension forum earlier this week. ???

PBFAB.COM · 06-17-2007, 06:38 PM

Quote:

Originally Posted by blazntn

I dont believe he works with KP anymore. But, I am not totally sure about that.

He still works at KP. He and I have been getting everything ironed out on a new "kit" with Dropmember front and KP rear components for the 63-72 trucks.

revn67 · 06-18-2007, 10:38 AM

that would be an awesome kit!!!

Frizzle Fry · 06-18-2007, 11:17 AM

Quote:

Originally Posted by porterbuilt

He still works at KP. He and I have been getting everything ironed out on a new "kit" with Dropmember front and KP rear components for the 63-72 trucks.

Let me know if you need someone to do a trial field install.

64shortc10 · 06-20-2007, 07:31 AM

Any word on a release date for the rear kp setup for 63-72 trucks? How much $ are we talking? Any sneak peak pics? Thanks..

Tony from Norcal

**lolife99** · 06-20-2007, 08:22 AM

I am interested in the "combo kit" with the rear KP set up! Please include prices. It may finally be time to spend some money!

Kontrol Phreaks · 06-26-2007, 02:16 PM

Yes I am back working at KP again after my 8 month disapperaing act. I've been posting in other topics lately that relate to my knowledge of suspension, product ideas, install suggestions, and products other things that I feel like responding too. Plus we're now a sponsor of the forum and we can legally post information to help everyone out.

Now for some update information. Thanks to Nathan Porter for spilling the beans, it is true we're working with Porterbuilt on some new products. KP Components is in the process of designing and building a bolt-on 4 Link & Cantilever system with a Watts link for the 1963 - 1972 C10 trucks. Our kits are all designed to work side by side with the Porterbuilt front crossmember to get your old school down on the ground.

" Are you off your rocker ? " then your not using KP Components and Porterbuilt products ....

We've completed some kits and have them out for testing as we speak. There's still some design changes and additions that need to be made to work with the various manufacture configurations that are out there.
The first truck that we completed was a 63 Chevy and it had the factory trailing arm setup under it. We designed the bolt-on axle pad to work on the angled spring perch so there will be no axle tube modifications required. I will start a new thread on here about our new systems and post a few pictures.

*** Please remember that these kits are not available for sale yet, but as it gets close to production everyone will be informed. We do not have a price figured out yet, but you can ask questions, or get on a waiting list to get the kits as soon as they are available. ***

Clint Petree
KP Components Inc.
866-KP-LINKS
www.kpcomponents.com

shifty · 06-26-2007, 03:17 PM

Is it just me, or did you weld one of your notches in backwards? One is high on the cab side, the other is low on the cab side.

Quote:

Originally Posted by 72slam

Trying again

Kontrol Phreaks · 06-26-2007, 04:11 PM

Quote:

Originally Posted by lolife99

I am interested in the "combo kit" with the rear KP set up! Please include prices. It may finally be time to spend some money!

Get your Benjamin's ready then. We're an authorized distributor for the Porterbuilt dropmembers and we'll be working on exclusive pricing for complete systems that include KP Components and Porterbuilt products. That way you know that you're getting the highest quality products that were specifically desinged for your truck, all for a package deal.

Clint Petree
KP Components Inc.

gringoloco · 06-26-2007, 07:22 PM

Quote:

Originally Posted by Kontrol Phreaks

KP Components is in the process of designing and building a bolt-on 4 Link & Cantilever system with a Watts link for the 1963 - 1972 C10 trucks ...and we'll be working on exclusive pricing for complete systems that include KP Components and Porterbuilt products.

Damnit! There's another maxed-out credit card...

gringoloco · 06-26-2007, 07:26 PM

Any plans for something like this for the 63-72s?

Oh yeah, and:

72slam · 06-26-2007, 07:51 PM

shifty, I'm not sure what you mean. Both sides are the same.

12-05-2006, 12:34 PM	#51
72slam Registered User Join Date: Oct 2006 Location: Pennsylvania Posts: 19	Re: kp components weld in step notch I'm going to try and post a pic for the first time, bear with me. Didn't work. ok, that worked. Guess I need to work on sizing. What size do youz guyz usually use? Thanks Last edited by 72slam; 12-05-2006 at 12:40 PM. Reason: size

12-05-2006, 12:53 PM	#52
72slam Registered User Join Date: Oct 2006 Location: Pennsylvania Posts: 19	Re: kp components weld in step notch Trying again

12-05-2006, 01:58 PM	#53
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: kp components weld in step notch hey 72slam did you paint the whole rotor or is that just an illusion the camera gives?? P.S looking great hope to be there soon. __________________ 1969 Chevy C-10 350/700r4

12-05-2006, 02:11 PM	#54
72slam Registered User Join Date: Oct 2006 Location: Pennsylvania Posts: 19	Re: kp components weld in step notch The face of the rotors are taped up. I wanted to paint the center and outer edge.

12-05-2006, 03:04 PM	#55
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: kp components weld in step notch I was wondering if anyone has tried the CPP Trailing Arm Kit or the Crossmember thats made for lowered applications? Im wanting to run them and was hoping for a little feed back before ordering them. I'm planning on mounting my bags in front of the rear end and to crossmember on front of my notch. Any suggestions? Thanks

12-12-2006, 08:07 PM	#56
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: kp components weld in step notch Ok will this notch layout on a 29" tire? All the pics look like it doesnt have enough clearance. I am about to get one but if it doesnt lay I will have to find something else!

01-14-2007, 09:13 PM	#58
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: kp components weld in step notch How many of you guys that have installed the KP notch had to trim it down? I just unpacked mine and the top piece looks like it is going to have to be trimmed quite a bit. __________________ -Bret 67 short-fleet sold!

01-14-2007, 10:07 PM	#59
sweet572 Registered User Join Date: Jan 2006 Location: sin cal Posts: 44	Re: kp components weld in step notch i didnt have to trim any part of the notch

01-15-2007, 11:57 AM	#60
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: kp components weld in step notch Man I talked to KP and they will make larger notches. The top piece does hang over. YOu will need to trim it to get a smooth look.

06-14-2007, 03:30 PM	#61
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: kp components weld in step notch any updates?

06-17-2007, 10:36 AM	#62
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: kp components weld in step notch Anybody heard from Clint ?? Is he even still around ?? John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

06-17-2007, 05:14 PM	#63
blazntn Registered User Join Date: Dec 2005 Location: TN Posts: 204	Re: kp components weld in step notch I dont believe he works with KP anymore. But, I am not totally sure about that. Last edited by blazntn; 06-17-2007 at 05:16 PM.

06-17-2007, 06:37 PM	#64
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: kp components weld in step notch I thought I saw a few posts of his in another thread in the suspension forum earlier this week. ??? __________________ -Bret 67 short-fleet sold!

06-18-2007, 10:38 AM	#66
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: kp components weld in step notch that would be an awesome kit!!! __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

06-20-2007, 07:31 AM	#68
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: kp components weld in step notch Any word on a release date for the rear kp setup for 63-72 trucks? How much $ are we talking? Any sneak peak pics? Thanks.. Tony from Norcal



Register or Log In To remove these advertisements.

06-20-2007, 08:22 AM	#69
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: kp components weld in step notch I am interested in the "combo kit" with the rear KP set up! Please include prices. It may finally be time to spend some money! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 06-20-2007 at 08:23 AM.

06-26-2007, 02:16 PM	#70
Kontrol Phreaks Registered User Join Date: Feb 2006 Location: Central Cali Posts: 242	Re: kp components weld in step notch Yes I am back working at KP again after my 8 month disapperaing act. I've been posting in other topics lately that relate to my knowledge of suspension, product ideas, install suggestions, and products other things that I feel like responding too. Plus we're now a sponsor of the forum and we can legally post information to help everyone out. Now for some update information. Thanks to Nathan Porter for spilling the beans, it is true we're working with Porterbuilt on some new products. KP Components is in the process of designing and building a bolt-on 4 Link & Cantilever system with a Watts link for the 1963 - 1972 C10 trucks. Our kits are all designed to work side by side with the Porterbuilt front crossmember to get your old school down on the ground. " Are you off your rocker ? " then your not using KP Components and Porterbuilt products .... We've completed some kits and have them out for testing as we speak. There's still some design changes and additions that need to be made to work with the various manufacture configurations that are out there. The first truck that we completed was a 63 Chevy and it had the factory trailing arm setup under it. We designed the bolt-on axle pad to work on the angled spring perch so there will be no axle tube modifications required. I will start a new thread on here about our new systems and post a few pictures. * Please remember that these kits are not available for sale yet, but as it gets close to production everyone will be informed. We do not have a price figured out yet, but you can ask questions, or get on a waiting list to get the kits as soon as they are available. * Clint Petree KP Components Inc. 866-KP-LINKS www.kpcomponents.com

06-26-2007, 07:26 PM	#74
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: kp components weld in step notch Any plans for something like this for the 63-72s? Oh yeah, and: __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 06-26-2007 at 07:32 PM.

06-26-2007, 07:51 PM	#75
72slam Registered User Join Date: Oct 2006 Location: Pennsylvania Posts: 19	Re: kp components weld in step notch shifty, I'm not sure what you mean. Both sides are the same.

Register or Log In To remove these advertisements.