Carpet strips hold downs - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Critter · 12-03-2007, 03:01 PM

I would buy one as well. I can also do the CAD (SolidWorks) work if I needed to help. Sounds like y'all got that under control though.

**Shock_Me** · 12-05-2007, 08:06 AM

I'd be in for front and rear carpet strips if they're re-produced.

Pete

LUV2XCLR8 · 12-05-2007, 02:29 PM

I see quite a few interested, I'll ask my boss about the true cost of having it done.

Keep in mind we only do Aluminum, but they would be very rigid and not flimsy. So
a couple of questions? Are front and rear the same? What would you pay for a set?
(Trying to justify the feasability of doing this, board members would get the hook
up on the price and anything left over would go to Evil Bay cause I'd have to buy
all that was produced and I don't think I'm going to trim out my garage in this)

tdkosta · 12-05-2007, 07:00 PM

How does $50 a set sound?

71BlazzinOrange · 12-05-2007, 10:33 PM

Quote:

Originally Posted by LUV2XCLR8

I see quite a few interested, I'll ask my boss about the true cost of having it done.

Keep in mind we only do Aluminum, but they would be very rigid and not flimsy. So
a couple of questions? Are front and rear the same? What would you pay for a set?
(Trying to justify the feasability of doing this, board members would get the hook
up on the price and anything left over would go to Evil Bay cause I'd have to buy
all that was produced and I don't think I'm going to trim out my garage in this)

Claim jumper read this post the answers are there.

LUV2XCLR8 · 12-06-2007, 02:25 PM

Does this mean I need to check on it or not? Not sure what you meant

meathead95 · 12-06-2007, 03:03 PM

i saw a used set sell on here for 250 the other day so i would say an EXACT copy should bring that

LUV2XCLR8 · 12-06-2007, 03:19 PM

I'm 99% sure I could get this done and make it affordable, but with the LARGE
minimum on the front end we would need around $2000 worth sold to even get
it done through my co. (Yeild could be 50+ sets depending on the bar weight)
If we had a Vendor interested that could help us with the cost also. But might
be even cheaper if the other guy in this thread can get it going through him

**OleSenna** · 12-07-2007, 06:06 PM

I'm in

I couldn't do $250.

$50-~$150 no problemo!

LUV2XCLR8 · 12-07-2007, 06:11 PM

I'm thinking $100+ Shipping a set, and sold only as a set, you want them to match right?

12-03-2007, 03:01 PM	#26
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Carpet strips hold downs I would buy one as well. I can also do the CAD (SolidWorks) work if I needed to help. Sounds like y'all got that under control though. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

12-05-2007, 08:06 AM	#27
Shock_Me Registered User Join Date: May 2005 Location: New Brunswick, Canada Posts: 585	Re: Carpet strips hold downs I'd be in for front and rear carpet strips if they're re-produced. Pete

12-05-2007, 02:29 PM	#28
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Carpet strips hold downs I see quite a few interested, I'll ask my boss about the true cost of having it done. Keep in mind we only do Aluminum, but they would be very rigid and not flimsy. So a couple of questions? Are front and rear the same? What would you pay for a set? (Trying to justify the feasability of doing this, board members would get the hook up on the price and anything left over would go to Evil Bay cause I'd have to buy all that was produced and I don't think I'm going to trim out my garage in this) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-05-2007, 07:00 PM	#29
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: Carpet strips hold downs How does $50 a set sound?

12-06-2007, 02:25 PM	#31
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Carpet strips hold downs Does this mean I need to check on it or not? Not sure what you meant __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-06-2007, 03:03 PM	#32
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Carpet strips hold downs i saw a used set sell on here for 250 the other day so i would say an EXACT copy should bring that __________________ 72 2wd blazer 72 swb 4x4

12-06-2007, 03:19 PM	#33
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Carpet strips hold downs I'm 99% sure I could get this done and make it affordable, but with the LARGE minimum on the front end we would need around $2000 worth sold to even get it done through my co. (Yeild could be 50+ sets depending on the bar weight) If we had a Vendor interested that could help us with the cost also. But might be even cheaper if the other guy in this thread can get it going through him __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-07-2007, 06:06 PM	#34
OleSenna Roof: Bad. Sky: Good. Join Date: Jul 2007 Location: Atlanta, GA Posts: 150	Re: Carpet strips hold downs I'm in I couldn't do $250. $50-~$150 no problemo! __________________ OleSenna

12-07-2007, 06:11 PM	#35
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Carpet strips hold downs I'm thinking $100+ Shipping a set, and sold only as a set, you want them to match right? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.