Where can I get these lights? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84Stepper · 02-27-2003, 10:24 PM

Hey guys, found these lights while surfin. Anybody know a source where I can find um? Right now I'm sanding the inside of my bed and while I got it off the truck I'd like to french them into my roll pan. I'd like to find them in red, maybe a little smaller. Also have any idea on costs? Thanks.

ocbaud · 02-27-2003, 10:28 PM

http://www.customclassic.com

alf4444 · 02-28-2003, 11:05 AM

re these the same ones

http://www.stylinconcepts.com/parts....=776&brandid=0

bagged78 · 02-28-2003, 08:32 PM

www.hitechledproducts.com
I think this is the place, might be spendy though!

phantom dually · 02-28-2003, 09:23 PM

I have seen a set on ebay motors for like $50 a pair. Go to search and type in (led lights silverado)

phantom dually · 02-28-2003, 09:28 PM

Ill sell these from Precision Rodware for $120 plus shipping. I gave $185 plus shipping. Let me know!!

phantom dually · 02-28-2003, 09:29 PM

The dark spots you see is just surface rust and is very light and will sand right off.

J-Spec C10 · 03-01-2003, 03:51 AM

I've been looking around to no avail, does anyone know of a "How To" article for installing LED's in the body so that you can clear coat right over them?

84Stepper · 03-01-2003, 03:17 PM

Those lights sure are nice but no thanks I dont have that kinda money right now for those. I was wondering if I could french these lights that I have? They are from a 42 Ford. Or do you guys think they look fine just the way they are.

J-Spec C10 · 03-01-2003, 09:07 PM

I cant tell about the lights, but the rollpan kicks a$$... it looks great!

SWINGSAX68 · 03-03-2003, 01:56 AM

I like the rear lights, keep em!!!! But then gain it is your truck and yours to do with. I have an Idea for my 68 stepside just like your step....but I like 'em!!!!

84Stepper · 03-04-2003, 12:03 AM

Thanks man I will keep them for sure. Besides I wouldnt know what to do with the wholes if I were to get rid of them.

CustomChevy · 03-04-2003, 12:48 AM

here's an idea for you. get some newer model cadillac taillights and mold them into the rear pillars of the bed. might look pretty good. that is just one of the ideas i am toying with for my stepside.

good luck!

Ric83 · 03-04-2003, 01:40 AM

Quote:

Originally posted by CustomChevy
here's an idea for you. get some newer model cadillac taillights and mold them into the rear pillars of the bed.

Have you been reading my "to do" list??

SWINGSAX68 · 03-04-2003, 11:22 AM

Quote:

Originally posted by 84Stepper
Thanks man I will keep them for sure. Besides I wouldnt know what to do with the wholes if I were to get rid of them.

You could run your exaust pipes throu them if you got rid of the lights

:p

84Stepper · 03-04-2003, 06:04 PM

HaHA! I dont think I will be running exaust pipes through the holes. I have seen the Cadillac lights on a 50's truck and it looked cool as hell. But I already put the other lights in and I think it would be a pain to do something else.

84Stepper · 03-04-2003, 06:05 PM

HaHA! I dont think I will be running exaust pipes through the holes. I have seen the Cadillac lights on a 50's truck and it looked cool as hell. But I already put the other lights in and I think it would be a pain to do something else. So I'll stick with it unless I can convince my dad that we should take them out.

02-27-2003, 10:24 PM	#1
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Where can I get these lights? Hey guys, found these lights while surfin. Anybody know a source where I can find um? Right now I'm sanding the inside of my bed and while I got it off the truck I'd like to french them into my roll pan. I'd like to find them in red, maybe a little smaller. Also have any idea on costs? Thanks. Attached Images __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

02-28-2003, 11:05 AM	#3
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	re these the same ones http://www.stylinconcepts.com/parts....=776&brandid=0 __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-28-2003, 08:32 PM	#4
bagged78 world class smart ass! Join Date: Jan 2003 Location: Clinton Utah Posts: 335	www.hitechledproducts.com I think this is the place, might be spendy though! __________________ Aric 75 2WD BLAZER (never ending project) -some day maybe- 02 2500HD CREW CAB 4X (daily drive) -8" lift 37s and 22s- ____ ____________________________

02-28-2003, 09:23 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I have seen a set on ebay motors for like $50 a pair. Go to search and type in (led lights silverado) __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-28-2003, 09:28 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ill sell these from Precision Rodware for $120 plus shipping. I gave $185 plus shipping. Let me know!! Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-27-2003, 10:28 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	http://www.customclassic.com

02-28-2003, 09:29 PM	#7
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	The dark spots you see is just surface rust and is very light and will sand right off. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

03-01-2003, 03:51 AM	#8
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	I've been looking around to no avail, does anyone know of a "How To" article for installing LED's in the body so that you can clear coat right over them? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

03-01-2003, 03:17 PM	#9
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Those lights sure are nice but no thanks I dont have that kinda money right now for those. I was wondering if I could french these lights that I have? They are from a 42 Ford. Or do you guys think they look fine just the way they are. Attached Images __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-01-2003, 09:07 PM	#10
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	I cant tell about the lights, but the rollpan kicks a$$... it looks great! __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

03-03-2003, 01:56 AM	#11
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	I like the rear lights, keep em!!!! But then gain it is your truck and yours to do with. I have an Idea for my 68 stepside just like your step....but I like 'em!!!! __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

03-04-2003, 12:03 AM	#12
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Thanks man I will keep them for sure. Besides I wouldnt know what to do with the wholes if I were to get rid of them. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-04-2003, 12:48 AM	#13
CustomChevy Registered User Join Date: Nov 2002 Posts: 462	here's an idea for you. get some newer model cadillac taillights and mold them into the rear pillars of the bed. might look pretty good. that is just one of the ideas i am toying with for my stepside. good luck!

03-04-2003, 06:04 PM	#16
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	HaHA! I dont think I will be running exaust pipes through the holes. I have seen the Cadillac lights on a 50's truck and it looked cool as hell. But I already put the other lights in and I think it would be a pain to do something else. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-04-2003, 06:05 PM	#17
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	HaHA! I dont think I will be running exaust pipes through the holes. I have seen the Cadillac lights on a 50's truck and it looked cool as hell. But I already put the other lights in and I think it would be a pain to do something else. So I'll stick with it unless I can convince my dad that we should take them out. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.