Parting out 85 GMC Sierra Classic 2500 2wd* - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 07-26-2009, 06:47 PM

Quote:

Originally Posted by mainermikeyd

No luck on the dual tank set up??? Even if the switch doesn't work thats ok I looking more for the wiring(fuseblock, dash, ect) than just the switch itself

I'll check but the PO hacked the wires (and bezel) when he put the radio in. Thanks, Ray

raiders3581 · 07-27-2009, 11:58 PM

payment sent

JQE80 · 07-28-2009, 12:10 AM

How is the cab mount hardware? Shipped to 45420

KrazyRay · 07-28-2009, 10:08 AM

Quote:

Originally Posted by JQE80

How is the cab mount hardware? Shipped to 45420

The cab mount hardware is in driver condition. I would have no problem putting themon anything other than a show truck. The 4 mounts include washers, bolts (a bit rusty), and rubber. $25 shipped. Will post pics today. Thanks, Ray

KrazyRay · 07-28-2009, 01:14 PM

Pics SOLD

JQE80 · 07-29-2009, 12:21 AM

PM me payment details and would you sell just one of the cab mounts from the frame? I have one with some rust on my frame.

JQE80 · 07-30-2009, 12:57 AM

payment sent!

KrazyRay · 08-03-2009, 09:31 PM

pics

setelec 73 · 08-04-2009, 01:34 AM

I NEED the cab molding if still available... Got so excited didnt even read on !!!!!!!

wydomkr · 08-04-2009, 02:51 PM

Quote:

Originally Posted by KrazyRay

cab corner speaker mounts $10

Still available?
These are for 4" x 10" speakers? Shipping cost to 57701 and pics if possible, thanks.

Also wondering if you would sell the arm rests separate from the door panels.

83burban · 08-05-2009, 04:42 PM

Dual Batteries? If so how much for the drivers side battery tray?

Would you consider selling just the cruise control module (vacuum canister mounted to the engine)?

Would you also sell just the plastic piece on the wiper motor that the 3 sprayer hoses attach to...mine has a broken stud?

How mush for the outer window seal on the passenger side door...assuming that its not cracked?

All pieces shipped to 91108. Thanks

KrazyRay · 08-05-2009, 10:33 PM

Quote:

Originally Posted by 83burban

Dual Batteries? If so how much for the drivers side battery tray?

Would you consider selling just the cruise control module (vacuum canister mounted to the engine)?

Would you also sell just the plastic piece on the wiper motor that the 3 sprayer hoses attach to...mine has a broken stud?

How mush for the outer window seal on the passenger side door...assuming that its not cracked?

All pieces shipped to 91108. Thanks

The driver side battery tray is $30 plus shipping, $5 for the wiper plastic piece, $5 for the window rubber. If you buy the tray, the other pieces will fit in the box for shipping. I'm guessing around $15 for the shipping. The cruise control is sold. Thanks, Ray

83burban · 08-05-2009, 11:20 PM

sounds good. Just pm you payment details. Any chance that you can post pictures of the battery tray. I need to see how it mounts up.
Thanks
Kurt

KrazyRay · 08-06-2009, 05:35 PM

Quote:

Originally Posted by KrazyRay

The driver side battery tray is $30 plus shipping, $5 for the wiper plastic piece, $5 for the window rubber. If you buy the tray, the other pieces will fit in the box for shipping. I'm guessing around $15 for the shipping. The cruise control is sold. Thanks, Ray

Here are the battery tray pics-if they upload Ok.

83burban · 08-06-2009, 05:44 PM

Sorry man... Going to have to pass on all of it...I got everything at the pick-a-part today. What i still need and couldn't find (so i will buy if you have it) is the fiber optic cable and light piece that mounts to the printed circuit. I also need the air tube the goes from the air pump to the air cleaner - mines all cracked to hell.

Again..sorry bout the other parts.

KrazyRay · 08-07-2009, 07:37 PM

pics of a/c and driver side speaker bracket.

mcbassin · 08-07-2009, 10:28 PM

Maybe I missed it but do you still have the dashpad? if yes, how much shipped to 74851 OK? thanks

KrazyRay · 08-08-2009, 12:00 AM

Quote:

Originally Posted by mcbassin

Maybe I missed it but do you still have the dashpad? if yes, how much shipped to 74851 OK? thanks

The dash pad is sold

Field and Son · 08-08-2009, 09:59 PM

It looks like cab clearance lights are still available for $25 shipped??? If so I will take them.

KrazyRay · 08-09-2009, 12:05 AM

Quote:

Originally Posted by Field and Son

It looks like cab clearance lights are still available for $25 shipped??? If so I will take them.

Yes they are. pm sent

83burban · 08-09-2009, 12:43 AM

Any luck with the air inlet tube that goes from the smog pump to the air-cleaner?

Field and Son · 08-09-2009, 06:38 AM

Quote:

Originally Posted by KrazyRay

Yes they are. pm sent

I will take the clearance lights. THanks!!

KrazyRay · 08-11-2009, 09:38 AM

Quote:

Originally Posted by 83burban

Any luck with the air inlet tube that goes from the smog pump to the air-cleaner?

I'm away from the truck right now. Will check it out Wed.

Prong · 08-11-2009, 04:15 PM

I'm looking for the A/C component shown in this thread http://67-72chevytrucks.com/vboard/s...d.php?t=357060
It looks like your's is the same. Would you be willing to separate it out from the rest? If so, how much shipped to 80012 Colorado?

KrazyRay · 08-11-2009, 05:17 PM

Quote:

Originally Posted by Prong

I'm looking for the A/C component shown in this thread http://67-72chevytrucks.com/vboard/s...d.php?t=357060
It looks like your's is the same. Would you be willing to separate it out from the rest? If so, how much shipped to 80012 Colorado?

I have the AC pending sale but I have a 79, 84, 86, and 87 that I can look at to see if I can find you that part. Thanks, Ray

07-27-2009, 11:58 PM	#102
raiders3581 Junior Member Join Date: Jun 2006 Location: pomona ca Posts: 187	Re: Parting out 85 GMC Sierra Classic 2500 2wd* payment sent __________________ 67 short bed fleetside/1997 c1500 exteded cab/ 2004 accord/87 c10silverado 350 od tbi

07-28-2009, 12:10 AM	#103
JQE80 Registered User Join Date: Jul 2001 Location: Dayton,OH Posts: 50	Re: Parting out 85 GMC Sierra Classic 2500 2wd* How is the cab mount hardware? Shipped to 45420 __________________ 79 c-10 big 10

07-28-2009, 01:14 PM	#105
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Pics SOLD Attached Images Last edited by KrazyRay; 08-08-2009 at 12:02 AM. Reason: sold

07-29-2009, 12:21 AM	#106
JQE80 Registered User Join Date: Jul 2001 Location: Dayton,OH Posts: 50	Re: Parting out 85 GMC Sierra Classic 2500 2wd* PM me payment details and would you sell just one of the cab mounts from the frame? I have one with some rust on my frame. __________________ 79 c-10 big 10

07-30-2009, 12:57 AM	#107
JQE80 Registered User Join Date: Jul 2001 Location: Dayton,OH Posts: 50	Re: Parting out 85 GMC Sierra Classic 2500 2wd* payment sent! __________________ 79 c-10 big 10

08-03-2009, 09:31 PM	#108
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 85 GMC Sierra Classic 2500 2wd* pics Attached Images

08-04-2009, 01:34 AM	#109
setelec 73 Registered User Join Date: Apr 2009 Location: Los Angeles, CA Posts: 78	Re: Parting out 85 GMC Sierra Classic 2500 2wd* I NEED the cab molding if still available... Got so excited didnt even read on !!!!!!! __________________ 1973 3/4 Ton Chevy 454 1990 Ford Ranger 4.0 2002 Cadillac Deville

08-05-2009, 04:42 PM	#111
83burban Registered User Join Date: Feb 2008 Location: la Posts: 345	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Dual Batteries? If so how much for the drivers side battery tray? Would you consider selling just the cruise control module (vacuum canister mounted to the engine)? Would you also sell just the plastic piece on the wiper motor that the 3 sprayer hoses attach to...mine has a broken stud? How mush for the outer window seal on the passenger side door...assuming that its not cracked? All pieces shipped to 91108. Thanks

08-05-2009, 11:20 PM	#113
83burban Registered User Join Date: Feb 2008 Location: la Posts: 345	Re: Parting out 85 GMC Sierra Classic 2500 2wd* sounds good. Just pm you payment details. Any chance that you can post pictures of the battery tray. I need to see how it mounts up. Thanks Kurt

08-06-2009, 05:44 PM	#115
83burban Registered User Join Date: Feb 2008 Location: la Posts: 345	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Sorry man... Going to have to pass on all of it...I got everything at the pick-a-part today. What i still need and couldn't find (so i will buy if you have it) is the fiber optic cable and light piece that mounts to the printed circuit. I also need the air tube the goes from the air pump to the air cleaner - mines all cracked to hell. Again..sorry bout the other parts.

08-07-2009, 07:37 PM	#116
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 85 GMC Sierra Classic 2500 2wd* pics of a/c and driver side speaker bracket. Attached Images

08-07-2009, 10:28 PM	#117
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Maybe I missed it but do you still have the dashpad? if yes, how much shipped to 74851 OK? thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-08-2009, 09:59 PM	#119
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Parting out 85 GMC Sierra Classic 2500 2wd* It looks like cab clearance lights are still available for $25 shipped??? If so I will take them. Last edited by Field and Son; 08-08-2009 at 10:00 PM. Reason: typo

08-09-2009, 12:43 AM	#121
83burban Registered User Join Date: Feb 2008 Location: la Posts: 345	Re: Parting out 85 GMC Sierra Classic 2500 2wd* Any luck with the air inlet tube that goes from the smog pump to the air-cleaner?

08-11-2009, 04:15 PM	#124
Prong Registered User Join Date: May 2007 Location: CO Posts: 474	Re: Parting out 85 GMC Sierra Classic 2500 2wd* I'm looking for the A/C component shown in this thread http://67-72chevytrucks.com/vboard/s...d.php?t=357060 It looks like your's is the same. Would you be willing to separate it out from the rest? If so, how much shipped to 80012 Colorado?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.