Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Daveboyd** · 10-17-2010, 12:38 PM

Quote:

Originally Posted by chapster

Hey Dave,

I left you a message letting you know I have not recieved the safety vent & sending unit yet. Could you please follow up on it and let me know.

Thanks,

I tracked the Package It says recieved so it is in transit. USPS's system does not update like UPS. most times the package delivers before there is any other update.

Dave.

chapster · 10-18-2010, 01:26 AM

Thanks for the update Dave.

Real_McCoy · 10-20-2010, 11:06 AM

I will try to get in on the Spring '11 GB, also. Just to be certain, these tanks will fit a '66 LWB. I read this thread end to end, but I can't remember if I read that or not.

swamp rat · 10-20-2010, 12:30 PM

Quote:

Originally Posted by Real_McCoy

I will try to get in on the Spring '11 GB, also. Just to be certain, these tanks will fit a '66 LWB. I read this thread end to end, but I can't remember if I read that or not.

http://67-72chevytrucks.com/vboard/s...4&postcount=89
Closest post regarding your year, question for a 65.

67C10BUB · 10-20-2010, 04:55 PM

I finally got my tank!!! It took over a month and a half, but it is finally here. Just a note to other future group buyers. Plan ahead, because they seem to get pretty backed up during the group buys. Mine took a little longer because Dave said that he overlooked my order. I'm a little disappointed because I requested 1/4" NPT fittings on my tank and it wasn't done, nor did I get a response to my E-mail requesting them. I thought that I may earn a special request since I was so patient with him overlooking my order, but I guess not. Other than that the tank looks great.

**Daveboyd** · 10-20-2010, 05:32 PM

Quote:

Originally Posted by 67C10BUB

I finally got my tank!!! It took over a month and a half, but it is finally here. Just a note to other future group buyers. Plan ahead, because they seem to get pretty backed up during the group buys. Mine took a little longer because Dave said that he overlooked my order. I'm a little disappointed because I requested 1/4" NPT fittings on my tank and it wasn't done, nor did I get a response to my E-mail requesting them. I thought that I may earn a special request since I was so patient with him overlooking my order, but I guess not. Other than that the tank looks great.

I did respond to your email right away. here is the email directly from my sent box on 10-11-10 at 9:32am
---------------------------
Jacob,

Your tank has already been finished and awaiting the EFI system to be installed. You should be able to purchase from any hardware store a 3/8 to 1/4 Reducer bushing.

Thank You,

Dave Boyd / Owner

Boyd Welding LLC
ph: 352-447-2405 begin_of_the_skype_highlighting**************352-447-2405******end_of_the_skype_highlighting
fax: 352-447-2403

From: Jacob Olauson [mailto:jacobolauson@yahoo.com]
Sent: Friday, October 08, 2010 10:47 PM
To: Dave Boyd
Subject: RE: Jacob Olauson's tank

Dave,

I know I just talked to you today, but I forgot one thing. Since you are building mine late, is there any way to ask for a special request? Rather than having 3/8" NPT fittings for the fuel in/out, can I have 1/4" NPT? I already bought 1/4" NPT fittings for my fuel lines because I swear I read a post from another member saying that you used 1/4" NPT on your tanks. If not, do you have any 90 degree 3/8" NPT to 1/4" NPT adapters available? Also, do you have any plugs for the "drain" on the EFI tank that you could throw in there?

Thanks, Jacob

--- On Fri, 10/8/10, Dave Boyd <daveboyd@boydwelding.com> wrote:

From: Dave Boyd <daveboyd@boydwelding.com>
Subject: RE: Jacob Olauson's tank
To: "'Jacob Olauson'" <jacobolauson@yahoo.com>
Date: Friday, October 8, 2010, 7:38 AM
Jacob,

I Have researched your order and found an issue. I will call you today to resolve.

Thank You,

Dave Boyd / Owner

Boyd Welding LLC
ph: 352-447-2405
fax: 352-447-2403

From: Jacob Olauson [mailto:jacobolauson@yahoo.com]
Sent: Thursday, October 07, 2010 6:23 AM
To: daveboyd@boydwelding.com
Subject: Jacob Olauson's tank

Dave,

It says on the thread that all of the group buy tanks shipped yesterday and we should have all received tracking numbers. I didn't get one, so I just wanted confirmation that mine went out as well.

Thanks,

Jacob Olauson

chris6499 · 11-23-2010, 01:23 AM

if i ordered a efi tank next week what kind of time frame would i be looking at

**Daveboyd** · 11-24-2010, 04:06 PM

Quote:

Originally Posted by chris6499

if i ordered a efi tank next week what kind of time frame would i be looking at

7-10 business days. I Have 2 NON-EFI tanks on the shelf ready for immediate shipment.

bmfpeterson · 12-15-2010, 06:06 PM

Quote:

Originally Posted by Daveboyd

7-10 business days. I Have 2 NON-EFI tanks on the shelf ready for immediate shipment.

I started at the beginging of this thread...... is the group by long gone or still around?

**Clyde65** · 12-15-2010, 06:16 PM

Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take.

bmfpeterson · 12-16-2010, 01:23 PM

Quote:

Originally Posted by Clyde65

Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take.

well im in for a group buy! so if anyone wants to try and see if we can make this happen let me know.

I need a non efi tank for my 71 short bed.

If it has to happen in march or so Ill wait as well just let me know

Sammy · 12-24-2010, 10:45 PM

Subscribed .

legendary · 12-27-2010, 06:28 PM

You have some very nice products, Mr. Boyd - I will definitely consider something for my truck in the near future

6T9GMC · 01-25-2011, 10:31 AM

Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump?

Thanks chris.

**Daveboyd** · 01-25-2011, 05:40 PM

Quote:

Originally Posted by 6T9GMC

Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump?

Thanks chris.

Chris,

Yes i have a side filler non EFI. Yes it will work with an EFI External pump.

349.00 tank
-10% discount
39.00 shipping to your location

give me a call if you want to get one ordered.

68GMCCustom · 01-25-2011, 12:37 PM

to anyone with one of these tanks completely installed, plumbed, etc.....thats "bed fill"....show us some pics of how you did the bed? Is there a door in one of the planks with the filler below...or did you flush mount something in the wood plank?

GCncsuHD · 01-25-2011, 01:38 PM

Dave, has anyone adapted one of these into a 73-87? I might be interested in another EFI tank for my 78 soon.

Edit: NVM I scrolled up to post 332

Any mods to make it fit that frame? I see the mounting brackets are different.

Gobbles · 01-31-2011, 01:45 PM

Hey Dave, what kind price difference is there during the group buy? Is it the 10% you quoted above? I'm interested in a non-efi, 90 degree feeder w/ sending unit. Thanks

Also, my mechanical fuel pump will work fine, correct?

**PGSigns** · 02-08-2011, 07:55 AM

I think this is going to be my next buy for my 65. Measurements look ok but sure would like some pics of one in a 65.
Thanks
Jimmy

**PGSigns** · 02-11-2011, 08:25 PM

Dave
I am ready to get one. So let me know what is in stock or if you need to make one.
Thanks
Jimmy

AJs72K5 · 02-11-2011, 10:24 PM

Quote:

Originally Posted by PGSigns

Dave
I am ready to get one. So let me know what is in stock or if you need to make one.
Thanks
Jimmy

Dave said the next group buy starts in March.... only a couple of weeks away.

**PGSigns** · 02-12-2011, 08:21 PM

I know the group buy is on the way but the truck has the bed off right now and is on the lift while I am doing the disc swap. Now is just the perfect time to do this swap. Gonna call Monday and get one built or on the way.
Jimmy

19stepSide72 · 02-13-2011, 01:17 PM

The smell of March is coming soon Mr. Boyd. Any dates on when your group buy may start. Been planning on this buy for a few months. Thanks Rob

**Daveboyd** · 02-16-2011, 06:55 PM

We are planning it as we speak. I will know better once we get back from the 3 day Winter Extravaganza at the Sumter County Fairgrounds this weekend the 18th 19th 20th. If anyone is local stop by our booth.

69chevpu · 02-19-2011, 12:11 AM

I have a question on the safety vent. Would the hose barb on the safety vent be used for the fill vent hose on a side fill? If I fill the tank and the fill hose gets full of fuel such that the fuel level is higher than the top of the tank does the fuel safety vent leak?

Will the fill vent hose connected to the safety vent hose barb allow air into the tank as the fuel gets used?

Also, my electric fuel level gauge came with a 200-34 ohm sender (i'm pretty sure I got that right). Would the price of my tank be less since I don't need the 0-90 ohm sender?

Anxiously awaiting the group buy!!

Mel

10-18-2010, 01:26 AM	#2
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Thanks for the update Dave. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

10-20-2010, 11:06 AM	#3
Real_McCoy Registered User Join Date: Oct 2007 Location: El Dorado, Kansas Posts: 198	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I will try to get in on the Spring '11 GB, also. Just to be certain, these tanks will fit a '66 LWB. I read this thread end to end, but I can't remember if I read that or not. __________________ Daniel 66 Chevy C10 LWB Support our troops!

10-20-2010, 04:55 PM	#5
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I finally got my tank!!! It took over a month and a half, but it is finally here. Just a note to other future group buyers. Plan ahead, because they seem to get pretty backed up during the group buys. Mine took a little longer because Dave said that he overlooked my order. I'm a little disappointed because I requested 1/4" NPT fittings on my tank and it wasn't done, nor did I get a response to my E-mail requesting them. I thought that I may earn a special request since I was so patient with him overlooking my order, but I guess not. Other than that the tank looks great. __________________ 67 5.3L Build

11-23-2010, 01:23 AM	#7
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank if i ordered a efi tank next week what kind of time frame would i be looking at

12-15-2010, 06:16 PM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-24-2010, 10:45 PM	#12
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Subscribed . __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

12-27-2010, 06:28 PM	#13
legendary Registered User Join Date: Nov 2010 Location: Atlanta, GA Posts: 154	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank You have some very nice products, Mr. Boyd - I will definitely consider something for my truck in the near future __________________ Best Regards, Leon 1970 C/10 LWB Cummins Turbo - Build in Progress Many other toys as well...

01-25-2011, 10:31 AM	#14
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump? Thanks chris.

01-25-2011, 12:37 PM	#16
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank to anyone with one of these tanks completely installed, plumbed, etc.....thats "bed fill"....show us some pics of how you did the bed? Is there a door in one of the planks with the filler below...or did you flush mount something in the wood plank? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-25-2011, 01:38 PM	#17
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, has anyone adapted one of these into a 73-87? I might be interested in another EFI tank for my 78 soon. Edit: NVM I scrolled up to post 332 Any mods to make it fit that frame? I see the mounting brackets are different. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 01-25-2011 at 01:40 PM.

01-31-2011, 01:45 PM	#18
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave, what kind price difference is there during the group buy? Is it the 10% you quoted above? I'm interested in a non-efi, 90 degree feeder w/ sending unit. Thanks Also, my mechanical fuel pump will work fine, correct? __________________ Trevor "You already said spite"

02-08-2011, 07:55 AM	#19
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I think this is going to be my next buy for my 65. Measurements look ok but sure would like some pics of one in a 65. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-11-2011, 08:25 PM	#20
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave I am ready to get one. So let me know what is in stock or if you need to make one. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-12-2011, 08:21 PM	#22
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I know the group buy is on the way but the truck has the bed off right now and is on the lift while I am doing the disc swap. Now is just the perfect time to do this swap. Gonna call Monday and get one built or on the way. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-13-2011, 01:17 PM	#23
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank The smell of March is coming soon Mr. Boyd. Any dates on when your group buy may start. Been planning on this buy for a few months. Thanks Rob



Register or Log In To remove these advertisements.

02-16-2011, 06:55 PM	#24
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank We are planning it as we speak. I will know better once we get back from the 3 day Winter Extravaganza at the Sumter County Fairgrounds this weekend the 18th 19th 20th. If anyone is local stop by our booth. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

02-19-2011, 12:11 AM	#25
69chevpu Registered User Join Date: Dec 2005 Location: Pendleton, Oregon Posts: 25	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I have a question on the safety vent. Would the hose barb on the safety vent be used for the fill vent hose on a side fill? If I fill the tank and the fill hose gets full of fuel such that the fuel level is higher than the top of the tank does the fuel safety vent leak? Will the fill vent hose connected to the safety vent hose barb allow air into the tank as the fuel gets used? Also, my electric fuel level gauge came with a 200-34 ohm sender (i'm pretty sure I got that right). Would the price of my tank be less since I don't need the 0-90 ohm sender? Anxiously awaiting the group buy!! Mel

Register or Log In To remove these advertisements.