The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-09-2009, 04:30 PM   #1
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Need some help...brake hose measurements

I need to order a set of brake hoses for my '69 K10 with a 4" lift. I swapped in '72 axles so I currently have disc brakes up front with drum brakes out back still. I took a rough meaurement from the back of my calipers to the hole in the frame where they mount and came up with 24". How much "extra" brake hose do I need for suspension travel? Anyone out there with the same lift specs that can get some measurements for me?

Thanks.
__________________
Shannon
sdailey is offline   Reply With Quote
Old 12-09-2009, 04:48 PM   #2
jaros44sr
Registered User
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,444
Re: Need some help...brake hose measurements

Quote:
Originally Posted by sdailey View Post
I need to order a set of brake hoses for my '69 K10 with a 4" lift. I swapped in '72 axles so I currently have disc brakes up front with drum brakes out back still. I took a rough meaurement from the back of my calipers to the hole in the frame where they mount and came up with 24". How much "extra" brake hose do I need for suspension travel? Anyone out there with the same lift specs that can get some measurements for me?

Thanks.
Sure, got the exact same thing. Had mine made up at a local hydraulic shop. I'll give you the lenght of mine, my frame has 2 holes in it, one on top of the other
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 12-09-2009, 05:13 PM   #3
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: Need some help...brake hose measurements

Thank you Sir. I'm talking with ORD about their hoses and they told me that a 24" hose came in their extended hose kit for trucks with a 4" lift, which of course isn't long enough for me. He then told me that they have 29" or 33" hoses as well. I'm thinking the 33" hose would work but I don't want to end up with too much slop in the hoses.
__________________
Shannon
sdailey is offline   Reply With Quote
Old 12-09-2009, 05:32 PM   #4
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: Need some help...brake hose measurements

to much slop in your hose could be bad ya know... (snickering like a 13 yr old!)

I don't think that your suspension will drop that much would it? I guess if you crossed a ditch and the driver side jammed up tight then the pass side would flex longer, but not a lot with leaf springs...
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 12-09-2009, 09:35 PM   #5
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: Need some help...brake hose measurements

Quote:
Originally Posted by msgross View Post
to much slop in your hose could be bad ya know... (snickering like a 13 yr old!)

I don't think that your suspension will drop that much would it? I guess if you crossed a ditch and the driver side jammed up tight then the pass side would flex longer, but not a lot with leaf springs...
Sloppy hose....you're too much Mike.

Here are a couple of pictures showing what I have now.

Front end, granted this is a straight line but it's 22-23" from the caliper to the frame mounting point.



Rear end from top of the axle to the rear mount.

__________________
Shannon
sdailey is offline   Reply With Quote
Old 12-10-2009, 06:56 AM   #6
84 400
Sb 400 club
 
84 400's Avatar
 
Join Date: Nov 2005
Location: NH / MA
Posts: 2,741
Re: Need some help...brake hose measurements

hmm. I have a 77 so it is probably different but i am running ORD's 4 inch lift extended brake lines and have plenty of slack in front. When i got them i thought they looked alittle short but on my truck they are perfect.
__________________
1984 chevy c10, built 400sb,.(SOLD)
77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363
1956 Willys Wagon (327 chevy) Project (Now Buick 225)
1980 Corvette L-48 4 speed
1992 Mustang GT built 5.0 5 speed

1985 C10 LWB Sold
1982 K10 SWB plow truck Parted out
1986 D30 M1028 fire brush truck Parted out
84 400 is offline   Reply With Quote
Old 12-10-2009, 09:11 AM   #7
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: Need some help...brake hose measurements

I guess I need to talk to ORD again and confirm what I was told. I've been emailing one of their techs about this and his response below is why I measured my frame to start with. Like everyone else I want to order the right part the first time. I'll forward the pictures above to them today and see what they suggest.

"The fronts are 25", and the rear is 18". We have longer kits if you need them. We have not recieved UPS yet today, but as of now we have not recieved them."


Jon Snow
Offroad Design
484 C.R. 113
Carbondale CO 81623
970-945-7777



Thanks for the help.
__________________
Shannon
sdailey is offline   Reply With Quote
Old 12-10-2009, 11:12 AM   #8
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: Need some help...brake hose measurements

Quote:
Originally Posted by jaros44sr View Post
Sure, got the exact same thing. Had mine made up at a local hydraulic shop. I'll give you the lenght of mine, my frame has 2 holes in it, one on top of the other
Did you ever have time to take some measurements?
__________________
Shannon
sdailey is offline   Reply With Quote
Old 12-10-2009, 02:21 PM   #9
jaros44sr
Registered User
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,444
Re: Need some help...brake hose measurements

Quote:
Originally Posted by sdailey View Post
Did you ever have time to take some measurements?
Yes, 27".I used the top hole in the frame, and got rid of the 'L' bracket the PO used

BTW, great looking build ya got going, nice work

Sorry the first pic is fuzzy, to much caffeine



__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim

Last edited by jaros44sr; 12-10-2009 at 02:22 PM.
jaros44sr is offline   Reply With Quote
Old 12-10-2009, 03:10 PM   #10
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: Need some help...brake hose measurements

Thank you Sir. That's what I needed to know and the pictures are a great help as well.
__________________
Shannon
sdailey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com