crew cab and four door guy HELP!!!!!!!!!

[72burbanbuilder]

my frame

i plan to use my stock frame and add some extra frame form the parts truck does any body know what my wheel base should be for a short bed crew

[Hart_Rod]

Originally Posted by 72burbanbuilder

ok i thanks for the help with the door but how do you go about takeing the 2 inchs out of the roof

You'll have to cut the front burb roof off and reskin it with a piece from the rear.

Originally Posted by 72burbanbuilder

my frame

i plan to use my stock frame and add some extra frame form the parts truck does any body know what my wheel base should be for a short bed crew

My wheel base is 148". It all depends on how you set it up. What I would suggest to you is finish the rear cab section prior to building your chassis. Then mock up the bed and see where that puts you.

[72burbanbuilder]

im not sure on the roof do you have any photos of how you did it

[72burbanbuilder]

bump

[Hart_Rod]

Originally Posted by 72burbanbuilder

im not sure on the roof do you have any photos of how you did it

I didn't build it, I bought it a couple of years ago (story in my build link below). The crew was built from a truck not a suburban. Whoever built it basically cut a truck cab in half and then added 33" in the center. Everything was fabbed, including both rear doors.

[Rokcrln]

Read through this build and it will give you plenty of info on the 4th door mod (along with the post and info that Rob linked above) and 1 way to get rid of the high roof crown.

http://67-72chevytrucks.com/vboard/s...d.php?t=306237 I will answer questions for you after you read the build thread and yes their will be a test

But first get the cab back in place and squared up before even thinking about cutting into the 4th door.


Kevin
LFD Inc.

[72burbanbuilder]

haha ok will do , is the test true false?