Project ''Second Time Around''

[Ger]

Originally Posted by 19723DR

I really don't think flames will ever go out of style.

I have looked at the KP 4 link kit it is a nice choice. I'm a ways away from that right now, but we'll see what the finances look like at the end of the summer. For right now I'm keeping the leaves minus one leaf I removed.

I don't now much about Airbagit.com's front kits. All I know is you have to be careful what you order from them. Do lots of research.

I have to agree, I don't think Flames will ever go out of style

[19723DR]

Originally Posted by Ger

I have to agree, I don't think Flames will ever go out of style

There are so many styles of flame, it's just a matter of which one is popular at the moment.

[19723DR]

Long weekend. I spent some time running the rear air lines and cleaning the rest of the frame and rear end. I also cut the exhaust off the drivers side. I'm going to route it past the trany then Y into the cat. Started to weld the pipe, but ran out of wire. Saturday I bout some shackles for the rear. That should set the rear end on the bump stops. I still need to cut the center support out of the bed before I can put the bed back on.

[scotts62]

Hey looking good, i like it!!!

[19723DR]

Originally Posted by scotts62

Hey looking good, i like it!!!

Thanks. You ought to hear the thing, open exhaust manifolds.

[19723DR]

This weekend I cut the middle support out of the bed so that I could test fit the bed. The Notch sits right on the bed floor so the support is not needed. Everything fit pretty well. The beds not bolted down all the way, but you get the picture. I've also been working on rerouting the exhaust. The drivers side needs to go straight back and turn after the trans. I'm going to scrap the old cat and put in a high flow one and then to a three chamber muffler.

[19723DR]