|
08-24-2010, 08:49 PM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
made my day!!!
so as a few of you know I have been hunting for a diffrent rear end for my 77 long bed 2wd for some time now cause i did the wheel spin trick to find out what i had and kept coming up with extreme highway gears. Well I went out tonight and pulled the cover off and counted the ring and pinion and hoorah!!! 41 and 11 calculate that and its 3.73!! exactly what i was looking for lol had it the whole time. and turns out that I think I have a posi inut too. I included a pic let me know what Im looking at cause i really dont know. from the cover it looks like it has been very low on fluid for some time now and its had really heavy wight fluid in it wich i believe is wrong if it is a posi. Also there are alot of gouges and a dark spot were you can see it has been welded. theroy:PO blew the rear end up, welded the cover and replaced the unit. thanks all im very happy now.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
08-24-2010, 08:52 PM
|
#2 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
the inside of the cover.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint Last edited by hotrod_991; 08-24-2010 at 08:53 PM. |
|
|
|
|
08-24-2010, 09:02 PM
|
#3 |
|
Registered User
Join Date: Oct 2005
Location: Branchville SC
Posts: 1,647
|
Re: made my day!!!
that looks to be a factory gov loc type of unit.. someone correct me if I am wrong.
__________________
2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks.. |
|
|
|
|
08-24-2010, 09:19 PM
|
#4 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
is that what most people would refer to as a "posi"?
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
08-24-2010, 09:20 PM
|
#5 |
|
Registered User
Join Date: Oct 2005
Location: Branchville SC
Posts: 1,647
|
Re: made my day!!!
it is, although not the strongest out there. its still good.
__________________
2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks.. |
|
|
|
|
08-24-2010, 09:22 PM
|
#6 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
haha its free and already mine so ill take it. it wasnt really working but that could be from the wrong fluid and very little of it in there.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
08-24-2010, 09:28 PM
|
#7 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: made my day!!!
I've gotta gov lock in my 84 and the diesel spins both tires everytime...
|
|
|
|
|
08-24-2010, 09:35 PM
|
#8 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
that is the effect im looking for solid launch and death of a few tires. I have all this motor and have never experienced the power of it at the wheels. Between worn out and slipping tranny and the rear end not hooking like it should started to think I wasted alot of my hard earned green now that I have a new trans and realized what I have and possible reasons its didnt work right my spirit has been renewed.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
08-24-2010, 09:36 PM
|
#9 |
|
Formerly- 1972SuperCheyenne
 
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: made my day!!!
Yeah for now! They're not exactly known to be the strongest. Once it starts just spinning one tire it's just a matter of time.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
|
|
|
|
08-24-2010, 09:40 PM
|
#10 | |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
Quote:
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
|
08-24-2010, 10:06 PM
|
#11 |
|
Registered User
Join Date: Jun 2008
Location: Lubbock, TX
Posts: 2,047
|
Re: made my day!!!
Oh well, you'll still have the correct gears to use if you blow up the gov-bomb and decide to get a stronger one.
|
|
|
|
|
08-24-2010, 10:09 PM
|
#12 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: made my day!!!
put a yukon locker in there while it's apart...
|
|
|
|
|
08-25-2010, 08:53 AM
|
#13 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: made my day!!!
its not really apart right now just took cover off and gonna clean it up. Deff not in the budget right now to buy a locker but soon deff soon
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
