KS Some frame pieces and crossmembers off a 72 1/2 2wd chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 12-26-2010, 08:40 PM

These were from a real clean frame from Arkansas orignally
I can cut down any of these. The middle crossmember that the trailing arms mount to, the trailing arm mounts are cut off
1) exhaust hangers $15 plus shipping for pair
2) middle crossmember $20 plus shipping
Thanks Randy

teeitup · 12-26-2010, 08:41 PM

1) spare tire carrier, needs a little straightened a bit $20 plus shipping, no hardware
2) other sections of frame

teeitup · 12-26-2010, 08:43 PM

1) all rear crossmembers are good, let me know what your wanting and I'll price
2) over loads $20 plus shipping,

teeitup · 12-26-2010, 08:44 PM

from behind front shock to in front of rear cab mount

teeitup · 12-26-2010, 08:46 PM

front crossmember is straight $20 plus shipping
frame horns pretty good, one of the bumper holes is a bit bigger, I torched it accidently, but not much. $20 plus shipping

teeitup · 12-26-2010, 08:47 PM

rear shock crossmember is in real good shape, no separation $40 plus shipping

409impala1 · 12-27-2010, 10:43 AM

will the overloads work on a 4x4? if so put me in line pending shipping.

**lolife99** · 12-27-2010, 11:10 AM

Randy,... I think member McBassin is looking for that rear shock crossmember.
You might send him a PM.

spatz · 12-27-2010, 01:49 PM

Hey Randy, Merry Christmas to you and your family.
What I need is the rear shock crossmember and framecuts and also in post #3, the rear frame rails can be with or without the crossmembers. Also on the rear frame rails,
where the overload springs where mounted, was it in the stock location? shipping to 48506. Also I'm in contact w/ another board member about his frame section.
Thanks Terry.

teeitup · 12-27-2010, 02:13 PM

Mark, they came off a coil spring truck so I'd say they won't work, sorry
Keith, Thanks. I priced it to him in another thread but he never said yea or nay
Terry, Thanks and Hope your family had a MERRY CHRISTMAS!!! The overloads are aftermarket I think, $20 for them. For the rear shock crossmember $40, for the 2 sections of rear frame without crossmembers, $30. How long do you need them for sure? Then plus shipping.
Thanks Randy

mcbassin · 12-27-2010, 03:14 PM

Quote:

Originally Posted by teeitup

Mark, they came off a coil spring truck so I'd say they won't work, sorry
Keith, Thanks. I priced it to him in another thread but he never said yea or nay
Then plus shipping.
Thanks Randy

Thanks Randy,
Sorry for not getting back with you I'm going to pass by the time we add shipping it's going to cost more than I wanted to spend. Still a good deal for someone. I think I can pick up one local. thanks again,
TTT

notsolo · 12-27-2010, 05:57 PM

Quote:

Originally Posted by teeitup

1) spare tire carrier, needs a little straightened a bit $20 plus shipping, no hardware
2) other sections of frame

Hey Randy what do you have left. I need Trailing arm cross member, overload spring hanger, panhard bracket. also looking for decent trailing arms. Thanks...Ed

teeitup · 12-27-2010, 07:40 PM

mcbassin, no problem, Thanks
notsolo, Ed, I strill have trailing arm crossmember, you can see in pics I had to cut the trailing arm brackets, so you'd have to mount other ones on it. Not sure if Spatz is wanting overloads yet. Panhard bracket, I need to see what all Spatz is wanting on that section. Sorry no good trailing arms right now,
Thanks Randy

spatz · 12-27-2010, 09:15 PM

Randy, I was just asking about the location on the frame rails, I don't need the overloads at all, mine are in good shape. I need 24" from the rear forward on the rear frame rails which would be before the panhard mount, and the coils spring mount to include frame pieces. shipping to 48506

teeitup · 12-27-2010, 09:32 PM

OK Terry, I'll try to get them cut up Tues after work and get you a quote. Thanks Randy

notsolo · 12-27-2010, 10:35 PM

Quote:

Originally Posted by teeitup

mcbassin, no problem, Thanks
notsolo, Ed, I strill have trailing arm crossmember, you can see in pics I had to cut the trailing arm brackets, so you'd have to mount other ones on it. Not sure if Spatz is wanting overloads yet. Panhard bracket, I need to see what all Spatz is wanting on that section. Sorry no good trailing arms right now,
Thanks Randy

Thanks Randy I will check back in a couple days...Ed

spatz · 12-27-2010, 11:50 PM

Hey Randy, let me clear up what I was asking for now that my brain is cleared. Rear frame cuts from rear 24" which should be from bumper mount end forward to before the panhard bar mount, and the complete rear shock crossmember with the frame cuts. I still have your address so let me know when you can. Thanks Terry

teeitup · 12-28-2010, 10:47 PM

Spatz has bought the rear shock crossmember and last 24 inches of rear frame
Everything else is still for sale
Thanks Randy

notsolo · 12-29-2010, 09:02 AM

Quote:

Originally Posted by teeitup

Spatz has bought the rear shock crossmember and last 24 inches of rear frame
Everything else is still for sale
Thanks Randy

Hey Randy I would like the helper springs, and the trailing arm crossmember with the brackets shown in the picture. I also could use the
rear cab mounts off the long frame pieces, way to heavy to ship whole thing so I would need you to harvest the pieces. You will need to adjust your cost with the xtra cutting. Let me know.. Thanks . Ed

teeitup · 12-29-2010, 09:25 AM

Ed, are you meaning the front cab mounts? The rear ones are on the trailing arm bracket? I'll try to get you a quote later today. Thanks Randy

notsolo · 12-29-2010, 02:44 PM

Quote:

Originally Posted by teeitup

Ed, are you meaning the front cab mounts? The rear ones are on the trailing arm bracket? I'll try to get you a quote later today. Thanks Randy

Randy Yes that would be correct. my mistake. Front cab mounts. Thanks Ed.

teeitup · 12-29-2010, 07:33 PM

pics for Ed, notice the trailing arm brackets are not any good, been cut

spatz · 01-14-2011, 11:52 AM

ttt. Hey Randy, the T.V. arrived safe and sound this morning, LMAO. everything perfect as usual, thanks again. Terry

teeitup · 01-14-2011, 02:12 PM

It sure was a HEAVY TV!!!!!!!!!!!!!!!!! Thanks Terry

Randy

12-26-2010, 08:40 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Some frame pieces and crossmembers off a 72 1/2 2wd chevy These were from a real clean frame from Arkansas orignally I can cut down any of these. The middle crossmember that the trailing arms mount to, the trailing arm mounts are cut off 1) exhaust hangers $15 plus shipping for pair 2) middle crossmember $20 plus shipping Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:57 PM.

12-26-2010, 08:41 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy 1) spare tire carrier, needs a little straightened a bit $20 plus shipping, no hardware 2) other sections of frame Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:54 PM.

12-26-2010, 08:44 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy from behind front shock to in front of rear cab mount Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:50 PM.

12-26-2010, 08:46 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy front crossmember is straight $20 plus shipping frame horns pretty good, one of the bumper holes is a bit bigger, I torched it accidently, but not much. $20 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:49 PM.

12-26-2010, 08:47 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy rear shock crossmember is in real good shape, no separation $40 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:48 PM.

12-26-2010, 08:43 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy 1) all rear crossmembers are good, let me know what your wanting and I'll price 2) over loads $20 plus shipping, Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-26-2010 at 08:56 PM.

12-27-2010, 10:43 AM	#7
409impala1 Registered User Join Date: Dec 2005 Location: nebraska Posts: 136	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy will the overloads work on a 4x4? if so put me in line pending shipping.

12-27-2010, 11:10 AM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Randy,... I think member McBassin is looking for that rear shock crossmember. You might send him a PM. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-27-2010, 01:49 PM	#9
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Hey Randy, Merry Christmas to you and your family. What I need is the rear shock crossmember and framecuts and also in post #3, the rear frame rails can be with or without the crossmembers. Also on the rear frame rails, where the overload springs where mounted, was it in the stock location? shipping to 48506. Also I'm in contact w/ another board member about his frame section. Thanks Terry.

12-27-2010, 02:13 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Mark, they came off a coil spring truck so I'd say they won't work, sorry Keith, Thanks. I priced it to him in another thread but he never said yea or nay Terry, Thanks and Hope your family had a MERRY CHRISTMAS!!! The overloads are aftermarket I think, $20 for them. For the rear shock crossmember $40, for the 2 sections of rear frame without crossmembers, $30. How long do you need them for sure? Then plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-28-2010 at 08:05 PM.

12-27-2010, 07:40 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy mcbassin, no problem, Thanks notsolo, Ed, I strill have trailing arm crossmember, you can see in pics I had to cut the trailing arm brackets, so you'd have to mount other ones on it. Not sure if Spatz is wanting overloads yet. Panhard bracket, I need to see what all Spatz is wanting on that section. Sorry no good trailing arms right now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-27-2010 at 07:41 PM.

12-27-2010, 09:15 PM	#14
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Randy, I was just asking about the location on the frame rails, I don't need the overloads at all, mine are in good shape. I need 24" from the rear forward on the rear frame rails which would be before the panhard mount, and the coils spring mount to include frame pieces. shipping to 48506

12-27-2010, 09:32 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy OK Terry, I'll try to get them cut up Tues after work and get you a quote. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-27-2010, 11:50 PM	#17
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Hey Randy, let me clear up what I was asking for now that my brain is cleared. Rear frame cuts from rear 24" which should be from bumper mount end forward to before the panhard bar mount, and the complete rear shock crossmember with the frame cuts. I still have your address so let me know when you can. Thanks Terry

12-28-2010, 10:47 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Spatz has bought the rear shock crossmember and last 24 inches of rear frame Everything else is still for sale Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-29-2010, 09:25 AM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy Ed, are you meaning the front cab mounts? The rear ones are on the trailing arm bracket? I'll try to get you a quote later today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2010, 07:33 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy pics for Ed, notice the trailing arm brackets are not any good, been cut Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-29-2010 at 07:33 PM.

01-14-2011, 11:52 AM	#23
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy ttt. Hey Randy, the T.V. arrived safe and sound this morning, LMAO. everything perfect as usual, thanks again. Terry

01-14-2011, 02:12 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some frame pieces and crossmembers off a 72 1/2 2wd chevy It sure was a HEAVY TV!!!!!!!!!!!!!!!!! Thanks Terry Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.