TX New Autometer Phantom gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevytruckluver · 01-12-2011, 08:45 PM

I have a new bezel with new autometer phantom gauges for sale. I am going another direction so I dont need these any more. The gauges are 2 1/16 in size. The gauges are electric except for the oil pressure which is mechanical. A 5 in Speedo and Tach will fit perfectly in the large holes.
175.00 shipped to lower 48

POPO1984 · 01-12-2011, 09:58 PM

where in texas are you located and what size is the medium hole

myoldchevytruck · 01-12-2011, 10:03 PM

Quote:

Originally Posted by POPO1984

where in texas are you located and what size is the medium hole

The medium hole as in the middle hole between the 2 large ones? If that's what your talking about, it's 3-1/2 inches

chevytruckluver · 01-12-2011, 10:19 PM

thanks for answering the question for me myoldchevytruck! as for the other one
I am in Ft Worth...aka "cowtown" therefore I call it "the town of the cow"...lol

myoldchevytruck · 01-12-2011, 10:28 PM

Quote:

Originally Posted by chevytruckluver

thanks for answering the question for me myoldchevytruck! as for the other one
I am in Ft Worth...aka "cowtown" therefore I call it "the town of the cow"...lol

No problem, good luck with the sale

POPO1984 · 01-13-2011, 11:19 AM

Ok thanks ill pass

1sik7t2 · 01-13-2011, 06:26 PM

i'm putting in a 6.0 2005 lq4 motor in my 72 burb so i need all electric guages will this work? and does it come with the bezel ? thx dave

Quote:

Originally Posted by chevytruckluver

I have a new bezel with new autometer phantom gauges for sale. I am going another direction so I dont need these any more. The gauges are 2 1/16 in size. The gauges are electric except for the oil pressure which is mechanical. A 5 in Speedo and Tach will fit perfectly in the large holes.
175.00 shipped to lower 48

chevytruckluver · 01-13-2011, 07:56 PM

Hi Dave
The oil pressure gauge is a mechanical gauge just like the factory one that came on your truck. It will need to be connected by a small tube to the engine to pick up oil pressure. Your engine will have a oil switch that you can tee into, or you could use a spare port on the block, usually near the oil filter. The volt gauge simply connects to a 12volt source, the fuel gauge is for a 0-90 ohm sender same as the factory tank has. The water temp gauge connects to the heat sending unit. You should have no problems with getting these hooked up to your 6 ltr.
Yes the bezel is included with the gauges

chevytruckluver · 01-13-2011, 07:58 PM

I also still have the papers that came with the gauges

chevytruckluver · 01-14-2011, 06:47 PM

ttt

1sik7t2 · 01-14-2011, 07:02 PM

i'll check my fitment when i'm home from work my tach is in the middle soooo need to figure it all out thx dave

1sik7t2 · 01-14-2011, 10:26 PM

pm sent

chevytruckluver · 01-16-2011, 12:36 AM

replied to pm

01-12-2011, 08:45 PM	#1
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	New Autometer Phantom gauges I have a new bezel with new autometer phantom gauges for sale. I am going another direction so I dont need these any more. The gauges are 2 1/16 in size. The gauges are electric except for the oil pressure which is mechanical. A 5 in Speedo and Tach will fit perfectly in the large holes. 175.00 shipped to lower 48 Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-12-2011, 09:58 PM	#2
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: New Autometer Phantom gauges where in texas are you located and what size is the medium hole __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84 Last edited by POPO1984; 01-12-2011 at 09:59 PM.

01-12-2011, 10:19 PM	#4
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: New Autometer Phantom gauges thanks for answering the question for me myoldchevytruck! as for the other one I am in Ft Worth...aka "cowtown" therefore I call it "the town of the cow"...lol __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-13-2011, 11:19 AM	#6
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: New Autometer Phantom gauges Ok thanks ill pass __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

01-13-2011, 07:56 PM	#8
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: New Autometer Phantom gauges Hi Dave The oil pressure gauge is a mechanical gauge just like the factory one that came on your truck. It will need to be connected by a small tube to the engine to pick up oil pressure. Your engine will have a oil switch that you can tee into, or you could use a spare port on the block, usually near the oil filter. The volt gauge simply connects to a 12volt source, the fuel gauge is for a 0-90 ohm sender same as the factory tank has. The water temp gauge connects to the heat sending unit. You should have no problems with getting these hooked up to your 6 ltr. Yes the bezel is included with the gauges __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-13-2011, 07:58 PM	#9
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: New Autometer Phantom gauges I also still have the papers that came with the gauges __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-14-2011, 06:47 PM	#10
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: New Autometer Phantom gauges ttt __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-14-2011, 07:02 PM	#11
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: New Autometer Phantom gauges i'll check my fitment when i'm home from work my tach is in the middle soooo need to figure it all out thx dave __________________ check out my build "DIRTY BURB"

01-14-2011, 10:26 PM	#12
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: New Autometer Phantom gauges pm sent __________________ check out my build "DIRTY BURB"

01-16-2011, 12:36 AM	#13
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: New Autometer Phantom gauges replied to pm __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.