Need Jet-Hot coated header info - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Randy70C-10* · 06-29-2003, 09:22 AM

I've seen this posted a hundred times, but can't use the search feature.

Who sells a good pair of coated headers specifically for my truck? (small block chevy, TH350 tranny) Thanks!

70c10 · 06-29-2003, 09:45 AM

Randy, I have Hooker Super Comps on the same combo as you that used to be coated along time ago. It wore off. I don't know the age though. The cheapest ceramic price I have seen are Flow tech made by Holley. $199 at Autozone. Dynomax are about $225 at Jegs. Hedman also fit good I believe. Chevelle shorties by hedman if you are lowering seem to be popular. Let us know what you get!......Jim

Low69CST · 06-29-2003, 09:59 AM

I have headmans for my truck and I love them. Priced good and I've seen them on several trucks at shows and no discoloring. They are full lengths and are slightly noticable under the truck, but not bad.

cdowns · 06-29-2003, 10:55 AM

i've got hedmans the fit is real nice no problems with the coating but they just suck with a lowered truck

*Randy70C-10* · 06-29-2003, 11:26 AM

Cool, thanks guys! I would like to go with a full-length header, truck is lowered 3 inches in the front, also lowering 4 in the rear. would the hedmans be a problem?

Ah, just noticed that your is 2/3 lowered, do yours hit?

SweetandLong68 · 06-29-2003, 12:28 PM

Anyone have those Dynomax Ceramic coated headers? Small block and T350. How do they fit? Any tweeking needed??

thanks
CHRIS

cdowns · 06-29-2003, 12:37 PM

yes the hedmans will b a problem i have a 21/2/4 drop and can't pull in/out of lots of driveways or off the shoulder of a road forget about speedbumps and if you pit potholes all i can say is good luck!! the whole collector section of the header is below the frame rail

*Randy70C-10* · 06-30-2003, 08:21 AM

I'm now thinking about getting the Flow Tech's by Holley. Has anyone here used them?

rigo · 06-30-2003, 11:39 AM

Randy, I've got the regular, un-coated flowtech headers....great fit...slipped right in.......they do hang below the frame about 2"....but other then that...i'd buy another set........i wish i'd had the money for the coated ones....i just like the look and the protection factor of those....

cochino12 · 06-30-2003, 11:44 AM

I am running a pair of sanderson headers they are shorties though dont know if thats what you want

*Randy70C-10* · 06-30-2003, 12:19 PM

Thanks guys, I went and ordered a pair of ceramic coated Flow-Techs. I'll get pics once installed.

06-29-2003, 09:22 AM	#1
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Need Jet-Hot coated header info I've seen this posted a hundred times, but can't use the search feature. Who sells a good pair of coated headers specifically for my truck? (small block chevy, TH350 tranny) Thanks!

06-29-2003, 09:45 AM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Randy, I have Hooker Super Comps on the same combo as you that used to be coated along time ago. It wore off. I don't know the age though. The cheapest ceramic price I have seen are Flow tech made by Holley. $199 at Autozone. Dynomax are about $225 at Jegs. Hedman also fit good I believe. Chevelle shorties by hedman if you are lowering seem to be popular. Let us know what you get!......Jim __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-29-2003, 09:59 AM	#3
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I have headmans for my truck and I love them. Priced good and I've seen them on several trucks at shows and no discoloring. They are full lengths and are slightly noticable under the truck, but not bad. Attached Images __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

06-29-2003, 10:55 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i've got hedmans the fit is real nice no problems with the coating but they just suck with a lowered truck __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-29-2003, 12:28 PM	#6
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Anyone have those Dynomax Ceramic coated headers? Small block and T350. How do they fit? Any tweeking needed?? thanks CHRIS __________________ 68 C10 shortbed -- Street/Strip

06-29-2003, 11:26 AM	#5
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Cool, thanks guys! I would like to go with a full-length header, truck is lowered 3 inches in the front, also lowering 4 in the rear. would the hedmans be a problem? Ah, just noticed that your is 2/3 lowered, do yours hit?

06-29-2003, 12:37 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	yes the hedmans will b a problem i have a 21/2/4 drop and can't pull in/out of lots of driveways or off the shoulder of a road forget about speedbumps and if you pit potholes all i can say is good luck!! the whole collector section of the header is below the frame rail __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-30-2003, 08:21 AM	#8
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I'm now thinking about getting the Flow Tech's by Holley. Has anyone here used them?

06-30-2003, 11:39 AM	#9
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	Randy, I've got the regular, un-coated flowtech headers....great fit...slipped right in.......they do hang below the frame about 2"....but other then that...i'd buy another set........i wish i'd had the money for the coated ones....i just like the look and the protection factor of those.... __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

06-30-2003, 11:44 AM	#10
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	I am running a pair of sanderson headers they are shorties though dont know if thats what you want Attached Images __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

06-30-2003, 12:19 PM	#11
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Thanks guys, I went and ordered a pair of ceramic coated Flow-Techs. I'll get pics once installed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.