The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 05-26-2011, 11:00 PM   #1
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Post your best budget mods! ($50 or less)

OK, some threads have been done in the past on the topic, but I want to throw a new twist on it... this is for everyone, but more for the flat broke crowd.

Many of us have a 3 day weekend coming up, and we might even get some quality truck tinkering time. Assuming you aren't doing booring crap like replacing the bolts that fell out of your fan clutch, you probably want to do upgrades, restoration, or simply, modifications.
But what's a broke SOB to do?

I was everyone to list favorite mods for under $50.
I've always said, one man's budget bolt on, is another man's budget. A very common area that this is true is when someone wants a simple 2 inch drop. Guys come out of the woodwork saying how 'affordable' drop spindles are... or drop springs. I haven't priced them for a few years, but I think they are 200-ish and 100-ish for those 'affordable' pieces. Chopping the spring is free, and despite common opinion, perfectly safe.
Now, lets set some ground rules for what is considered a $50 mod.
Obviously, a person with a pole barn packed with a lift, $25,000 worth of tools, a plasma cutter and 220volt miller MIG welder can get anything done. They have the tools to take junk metal and turn it into a one off treasure. Same with the guys who can paint like Chip Foose.
Lets keep this simple.
#1... 50 bucks is 50 bucks. Not 50 bucks plus this $300 piece "I had laying around" Now a $300 piece that you scored for $50 on Craigslist or at a flea market is fair game.
#2... Cheaper is always better.... free is best.
#3... Hand tools only. If you used air tools to make/modify something, then it is out. HOWEVER... if it could have been done with hand tools, then it's cool and it is back in.
#4... Lets keep it simple, something the average moron with little tallent (like me) can do.
#5... a quick overview, or a link to step by step instructions is best, so this thread doesn't become a 30 page thread that you have to sift through to find that trick you need.

With any luck, this will be a cool list of tips and tricks that we can refer to for years to come.
Attached Images
 

Last edited by Longhorn Man; 05-28-2011 at 12:04 AM.
Longhorn Man is offline  
Old 05-26-2011, 11:11 PM   #2
Beat68CST
Registered User
 
Beat68CST's Avatar
 
Join Date: Oct 2010
Location: Buckeye Arizona
Posts: 470
Re: Post your best budget mods! ($50 or less)

Anyone call you a genius on the forum yet? :P


Great thread idea, hope to see it prosper and give me some ideas!
Beat68CST is offline  
Old 05-26-2011, 11:14 PM   #3
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 20,017
Re: Post your best budget mods! ($50 or less)

Andy- You need to post up the no-cost sidemarker french mod you did a while back. That was one of the best free cool mods I have seen in a long time.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
RIP FleetsidePaul
leddzepp is offline  
Old 05-26-2011, 11:32 PM   #4
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: Post your best budget mods! ($50 or less)

i think if you found them for such a price buddy buckets would be the best mod for 50 or less if you could find them
67chevy1series is offline  
Old 05-27-2011, 12:10 AM   #5
wild4wheels
Registered User
 
wild4wheels's Avatar
 
Join Date: Jan 2001
Location: Queen Creek, Arizona
Posts: 1,626
Re: Post your best budget mods! ($50 or less)

I think this counts I hope, but on a 71 or 72 using the smooth 67-70 "no signal hole" bumper and using Visibolts (@ $30) for your blinkers. Very clean look.
Attached Images
 
__________________
Dave aka "Wild"

Current truck
"Ida Mae" 71 K5 Blazer

Former Trucks
"Loretta" 71 Longbed (AZ)
"Tanya" 69 Stepside (AZ)
"Ferdinand" 71 Longhorn (SD)
"Patches" 67 Panel (IA/ KY)
"Rosita" 68 C30 (KY)

Instagram @Wildforwheels @k5_klub @c10university

Profile pic provided by Jeff Sundance
wild4wheels is offline  
Old 05-27-2011, 12:28 AM   #6
tantrumpipeline
Master Procrastinator
 
tantrumpipeline's Avatar
 
Join Date: Sep 2009
Location: Grande Prairie AB Canada
Posts: 1,128
Re: Post your best budget mods! ($50 or less)

I'm in this is a great thread
__________________
My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506
20 Duramax tow pig
68 2wd short stepper project
77 2wd short fleet beater
52 short project
tantrumpipeline is offline  
Old 05-27-2011, 12:30 AM   #7
Jobe72
Registered User
 
Jobe72's Avatar
 
Join Date: Mar 2010
Location: Austin, TX
Posts: 299
Re: Post your best budget mods! ($50 or less)

$50 will get you some sandpaper, can of primer, can of black and a can of chevy orange.
Time will get you cleaning up your engine compartment. With some left over for a six pack of your beverage of choice and a bag of chips.
__________________
1972 GMC Sierra LWB (Aquafresh)
1962 Cadillac Convertible
1962 Cadillac Sedan project
Jobe72 is offline  
Old 05-27-2011, 12:34 AM   #8
TrkEnvy
Registered User
 
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 264
Re: Post your best budget mods! ($50 or less)

Quote:
Originally Posted by wild4wheels View Post
I think this counts I hope, but on a 71 or 72 using the smooth 67-70 "no signal hole" bumper and using Visibolts (@ $30) for your blinkers. Very clean look.
Nice!! im gonna do just that with my 71..
TrkEnvy is offline  
Old 05-27-2011, 12:35 AM   #9
tantrumpipeline
Master Procrastinator
 
tantrumpipeline's Avatar
 
Join Date: Sep 2009
Location: Grande Prairie AB Canada
Posts: 1,128
Re: Post your best budget mods! ($50 or less)

$50 on eBay can do wonders, I got myself a full tail light and deluxe marker kit with lenses, bezels, and gaskets with shipping to canada for just under and although they are repro they look super nice and I traded the fleetside tail light setup for a case of beer. I find that patience and upping bids by $2.75 over a round common number can be just enough to steal an auction
__________________
My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506
20 Duramax tow pig
68 2wd short stepper project
77 2wd short fleet beater
52 short project
tantrumpipeline is offline  
Old 05-27-2011, 01:28 AM   #10
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Post your best budget mods! ($50 or less)

Quote:
Originally Posted by Jobe72 View Post
$50 will get you some sandpaper, can of primer, can of black and a can of chevy orange.
Time will get you cleaning up your engine compartment. With some left over for a six pack of your beverage of choice and a bag of chips.
Quote:
Originally Posted by tantrumpipeline View Post
$50 on eBay can do wonders, I got myself a full tail light and deluxe marker kit with lenses, bezels, and gaskets with shipping to canada for just under and although they are repro they look super nice and I traded the fleetside tail light setup for a case of beer. I find that patience and upping bids by $2.75 over a round common number can be just enough to steal an auction
These are both great points.

For a cheap facelift...


On a 69-70 grille, clean it up and then mask off and re-paint the black and that really dresses up the front end. To take it a step further if it's dull....use drain cleaner to strip off the anodizing and then polish it and then paint the black and clear over all of it.

One thing I like on a 71-72 with a cracked inner grille is to glue the pieces together and spray it with a satin black paint. Adds a custom look and hides the cracks.

On a 69-70 grille, clean it up and then mask off and re-paint the black and that really dresses up the front end.

On a 67-68 painting it white is a nice way to accent it if it's painted body color or repainting if faded...
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline  
Old 05-27-2011, 05:38 AM   #11
prairewolf
Registered User
 
Join Date: Oct 2005
Location: south dakota
Posts: 1,895
Re: Post your best budget mods! ($50 or less)

Rustoleum " Hammered texture ". .... it says on can.. " can be applied directly over rust''. I can attest to that.... it turns my ''fifty footer'' running boards and hitch into 20 footers.
__________________
eat,work,spend,sleep,repeat.

Last edited by prairewolf; 05-27-2011 at 05:41 AM.
prairewolf is offline  
Old 05-27-2011, 06:23 AM   #12
splehigh
Registered User
 
splehigh's Avatar
 
Join Date: Nov 2008
Location: Glenville, Pa
Posts: 445
Re: Post your best budget mods! ($50 or less)

Good thread. Lets hear some more.
splehigh is offline  
Old 05-27-2011, 06:30 AM   #13
FLDBRED
Registered User
 
Join Date: Jun 2009
Location: CENTRAL,NJ
Posts: 586
Re: Post your best budget mods! ($50 or less)

Great Thread! I bought a sanding disc.for my 3/8 electic drill,some Por-15 and did the bed in my 71,came to around 50 bucks,but gave me a lot of piece of mind!
FLDBRED is offline  
Old 05-27-2011, 06:56 AM   #14
Hottrucks
Redefining LowBudget
 
Hottrucks's Avatar
 
Join Date: Mar 2009
Location: lebanon Cow Hampshire
Posts: 4,538
Re: Post your best budget mods! ($50 or less)

I have to say the best $50 I have EVER spent on my truck was adding power brakes....Bought a used booster and bracket and its a simple bolt on
__________________
1970 C10 CST fleetside 472 ....big dreams little cash...
SunShine Syndicate..

Mikes Sandwich Fair Run OCT 8th 2011
Hottrucks is offline  
Old 05-27-2011, 07:29 AM   #15
71meangreenc10
Its a Truck Thing......
 
71meangreenc10's Avatar
 
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,179
Re: Post your best budget mods! ($50 or less)

Less than $25, you can get wiper delay that is simple to install and works well. I have used them in two trucks.....Love it.....

All you need is wire crimpers (or vise grips for those who prefer) and a drill to mount it.

http://www.jcwhitney.com/windshield-...wx?filterid=j1

Smitty
__________________
71 C10 283/3SPD Full Resto
71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599
70 C10 Suburban Former military GSA truck.
72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378
72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110
68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head
71 C30 Wrecker
71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck
68 GMC Long Stepside. They keep following me home
69 C30 Former Motor Home, Flat Bed time
70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"
71meangreenc10 is offline  
Old 05-27-2011, 07:38 AM   #16
96blazr
Registered User
 
96blazr's Avatar
 
Join Date: Aug 2003
Location: VA
Posts: 740
Re: Post your best budget mods! ($50 or less)

My Battery disconnect and Kill Switch.
__________________
1968 SWB.
GMPP 350/350 Turbo Trans, Edelbrock Performer & Carb. Hedman Hedders, Hooker Aerochambers Mufflers. Tuff Stuff Alternators.

Remember, no matter where you go,
There you are.

Gary
96blazr is offline  
Old 05-27-2011, 07:43 AM   #17
chevy72pu
Registered User
 
chevy72pu's Avatar
 
Join Date: Jan 2009
Location: Sandersville, GA
Posts: 298
Re: Post your best budget mods! ($50 or less)

I'm subscribing to this. Great Idea.
__________________
How 'Bout them Dawgs!

'10 Traverse LTZ
03 Silverado Z71 ext cab
99 Yamaha Grizzly 600
72 C10 350/350 sportside bed.
68 C30 flatbed. 350 4-speed.

"I've got a good memory, it's just short!"
chevy72pu is offline  
Old 05-27-2011, 07:47 AM   #18
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Post your best budget mods! ($50 or less)

if it is a moving part first spray the heck out of it with WD40 to clean out the old dirty petrified crap , they spray with lubriplate or other lasting lubricant for longer lasting protection
TOTAL COST ABOUT $10

a piece of sandpaper a wire brush needle nose plyers and some dielectric grease to clean up and tighten up electrical connections
throw in ground wires from the bed to the frame and cluster to firewall
TOTAL COST LESS THAN $5
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline  
Old 05-27-2011, 09:15 AM   #19
steelhorse
Senior Member
 
steelhorse's Avatar
 
Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
Re: Post your best budget mods! ($50 or less)

Ok I'm not sure if this counts but here it goes.I bought a 87 c10 from the local boneyard for $450(I know wait for it)Sold the bed for $400,the Trans for $250,kept the front suspension and brake along with the steering components.Then sold the cab and frame for $200,then the engine for another $200.I also sold the doors for $100 a piece.I used the extra money to buy a front bed panel on craigslist along with a oe tailgate(stepside)got all the bed crossmembers and a stepside fender and step thrown in along with 4 chrome vent windows and a perfect oe door in mint cond for $300.Then I found a set of drop spindles and ordered a rear 4 inch drop kit and a rear crossmember with exhaust cutouts.By the time I was done with assorted parts I had $22 dollars in it.
steelhorse is offline  
Old 05-27-2011, 09:30 AM   #20
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: Post your best budget mods! ($50 or less)

I'm going with the headlight relay mod. If you get relays and wiring at the junk yard, it van be done for about 10 bucks.
Posted via Mobile Device
ls1nova71 is offline  
Old 05-27-2011, 09:33 AM   #21
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Wa.
Posts: 19,980
Re: Post your best budget mods! ($50 or less)

Quote:
Originally Posted by Longhorn Man View Post
#4... Lets keep it simple, something the average moron with little tallent (like me) can do.
Cmon Andy, we all know you are an above average moron

Great idea for a thread, I hope people can keep to your rules for 50 buck (or less) ideas.
__________________
… … … … … … … … ... … … … … … … … … … … …

Last edited by CG; 05-27-2011 at 09:34 AM.
CG is offline  
Old 05-27-2011, 09:46 AM   #22
custom1970
Member
 
custom1970's Avatar
 
Join Date: Jan 2011
Location: Stuart, Florida
Posts: 467
Re: Post your best budget mods! ($50 or less)

I agree with rattle can of black paint and some silver model paint,....
Attached Images
  
__________________
1970 CST LB Fleetside, 402 BB, PS, PB,AC
1968 Firebird 400 conv.
1965 Chris Craft 17' wood ski boat (SN #0001)
custom1970 is offline  
Old 05-27-2011, 09:51 AM   #23
gcburdic
Restoration Virgin!
 
gcburdic's Avatar
 
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
Re: Post your best budget mods! ($50 or less)

Quote:
Originally Posted by Longhorn Man View Post
#5... a quick overview, or a link to step by step instructions is best, so this thread doesn't become a 30 page thread that you have to sift through to find that trick you need.
Great thread Andy!!!!...for those that have posted or will post......please help the moron in me out and post up a link or quick overview

BTW....Woodgrain dash bezel http://67-72chevytrucks.com/vboard/s...d.php?t=465303 ...post#11....$14....by leddzepp....thanks Scott!!!!
__________________
Geoff with a G
1968 Chevy C10 SWB The Mistress

1972 Custom Deluxe C20 Suburban A Suburban Named Isabella

1966 Ford Mustang Mama's High School Graduation Present

Last edited by gcburdic; 05-27-2011 at 09:54 AM.
gcburdic is offline  
Old 05-27-2011, 10:07 AM   #24
KMACD71
Registered User
 
KMACD71's Avatar
 
Join Date: Aug 2008
Location: Lethbridge,Alberta
Posts: 532
Re: Post your best budget mods! ($50 or less)

Can of white paint, bottle of orange model paint and brushes for the needles and you can brighten up your bezels and I believe with the LED bulb swap you can still be under $50.00.
Attached Images
  
KMACD71 is offline  
Old 05-27-2011, 10:14 AM   #25
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: Post your best budget mods! ($50 or less)

Quote:
Originally Posted by cdowns View Post
if it is a moving part first spray the heck out of it with WD40 to clean out the old dirty petrified crap , they spray with lubriplate or other lasting lubricant for longer lasting protection
TOTAL COST ABOUT $10

a piece of sandpaper a wire brush needle nose plyers and some dielectric grease to clean up and tighten up electrical connections
throw in ground wires from the bed to the frame and cluster to firewall
TOTAL COST LESS THAN $5
This is actually a very good one - who doesn't have parts on their truck that couldn't stand to be cleaned up/lubricated to make them work better? These should actually be the first improvements we do - and they're very cheap as is stated.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD
Click here to support the board
Philippians 4: 6-7
dan42 is offline  
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com