The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-27-2011, 03:46 PM   #426
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

My '68.
Attached Images
     
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-28-2011, 08:17 AM   #427
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: How about some pics of High Performance haulers.

Cool truck Hot68gmc. Have you ran it at the track? How fast is it? Tell us more about it.
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 12-28-2011, 05:20 PM   #428
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

Thanks! So far it's gone 13.24@103 on a pump gas tune and at 5280 ft up. I'm hoping once the suspension is set up for the track and not street it'll dip 12's.. Spins like a motha off the line right now.

It's running a 384 small block, 11.8:1 compression, custom FTI cam, Canfield 217cc/64cc heads, Brodix HV1000 manifold, Quick Fuel 1050 carb, forged bottom end from Eagle/Probe, Hooker headers, 3" manderal bent exhaust system with SpinTech mufflers. Hughes Competition TH350, manual valve body, fwd pattern, Hughes 10" 4100 stall converter. 3/4 ton Dana 60 rear end, 4:10 gears.

Front suspension consists of Moog ball joints, tie rod ends, etc. ECE drop springs, drop spindles, 3/4-1/2 ton conversion, disc brakes. The rear has a custom 4-link with Aldan Eagle coil overs.

The body is all steel. Complete interior.

It's driven on the street to work and back every day and hauls my 3 year old daughter to grandmas house!
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-28-2011, 06:39 PM   #429
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

forgive the double post.. Here's a link to the Garage Built Rides artical that was done on the truck this year. http://www.garagebuiltrides.com/home...ver-drag-truck
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-29-2011, 01:26 AM   #430
65Pickup
Registered User
 
65Pickup's Avatar
 
Join Date: Jun 2010
Location: Vancouver Island BC
Posts: 652
Re: How about some pics of High Performance haulers.

Great truck, very aggressive looking, any hp numbers and what tires are you running?
__________________
65Pickup is offline   Reply With Quote
Old 12-29-2011, 11:33 AM   #431
limitedstreetoutlaw
Registered User
 
limitedstreetoutlaw's Avatar
 
Join Date: Jun 2009
Location: Arkoma OK
Posts: 134
Re: How about some pics of High Performance haulers.

Tough looking truck HotRodGMC68.
__________________
Brandon
Street Car Mafia
limitedstreetoutlaw is offline   Reply With Quote
Old 12-29-2011, 01:21 PM   #432
bigboybodry
Registered User
 
bigboybodry's Avatar
 
Join Date: Jul 2009
Location: Florence,Mississippi
Posts: 301
Re: How about some pics of High Performance haulers.

sweet ride brother!
__________________
first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ
bigboybodry is offline   Reply With Quote
Old 12-29-2011, 01:22 PM   #433
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

Thanks for the good words! The tires in the photos are 28x11.5x16 MT ET Streets. I've since gone to a 295x50x16 Hoosier Drag Radial.
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-29-2011, 01:25 PM   #434
bigboybodry
Registered User
 
bigboybodry's Avatar
 
Join Date: Jul 2009
Location: Florence,Mississippi
Posts: 301
Re: How about some pics of High Performance haulers.

Quote:
Originally Posted by HotRodGMC68 View Post
Thanks for the good words! The tires in the photos are 28x11.5x16 MT ET Streets. I've since gone to a 295x50x16 Hoosier Drag Radial.
how does it hook with the drag radial and can you leave on the kit
__________________
first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ
bigboybodry is offline   Reply With Quote
Old 12-29-2011, 01:37 PM   #435
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

as far as horse power numbers go, it's never been on a dyno.. When we built the engine we estimated it at 490 hp and 508 lb/ft at the crank.
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-29-2011, 01:38 PM   #436
HotRodGMC68
Registered User
 
HotRodGMC68's Avatar
 
Join Date: Aug 2005
Location: Albuquerque, New Mexico
Posts: 32
Re: How about some pics of High Performance haulers.

Quote:
Originally Posted by bigboybodry View Post
how does it hook with the drag radial and can you leave on the kit
I put the drag radials on it right when our racing season ended this year so it hasn't been on the track with them yet. The nitrous kit came off of the truck and went on my wife's camaro. Never got the chance to run it on the button.
__________________
384 Stroker Small Block-
Best ET: 13.24@103
HotRodGMC68 is offline   Reply With Quote
Old 12-31-2011, 10:56 PM   #437
Dinos63
chevy only
 
Dinos63's Avatar
 
Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
Re: How about some pics of High Performance haulers.

my 66 prostreeter
Attached Images
   
__________________
CHEVY ONLY... Nothin Else !
Dinos63 is offline   Reply With Quote
Old 12-31-2011, 11:20 PM   #438
CoggedBelt75
Registered User
 
CoggedBelt75's Avatar
 
Join Date: Nov 2008
Location: Altus, Oklahoma
Posts: 679
Re: How about some pics of High Performance haulers.

^^Sweet^^
__________________
Joe
__________________________________________
1975 C10

"Questions are a sign of intelligence indicating a desire to eliminate ignorance"
CoggedBelt75 is offline   Reply With Quote
Old 01-02-2012, 01:02 AM   #439
limitedstreetoutlaw
Registered User
 
limitedstreetoutlaw's Avatar
 
Join Date: Jun 2009
Location: Arkoma OK
Posts: 134
Re: How about some pics of High Performance haulers.

Dinos63 that is sweet.
__________________
Brandon
Street Car Mafia
limitedstreetoutlaw is offline   Reply With Quote
Old 01-03-2012, 12:24 AM   #440
Dinos63
chevy only
 
Dinos63's Avatar
 
Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
Re: How about some pics of High Performance haulers.

thanks duudes
__________________
CHEVY ONLY... Nothin Else !
Dinos63 is offline   Reply With Quote
Old 02-05-2012, 10:02 AM   #441
83gmc4x4
Registered User
 
Join Date: Jun 2010
Location: Parsons, KS
Posts: 36
Re: How about some pics of High Performance haulers.

Quote:
Originally Posted by HotRodGMC68 View Post
Thanks! So far it's gone 13.24@103 on a pump gas tune and at 5280 ft up. I'm hoping once the suspension is set up for the track and not street it'll dip 12's.. Spins like a motha off the line right now.

It's running a 384 small block, 11.8:1 compression, custom FTI cam, Canfield 217cc/64cc heads, Brodix HV1000 manifold, Quick Fuel 1050 carb, forged bottom end from Eagle/Probe, Hooker headers, 3" manderal bent exhaust system with SpinTech mufflers. Hughes Competition TH350, manual valve body, fwd pattern, Hughes 10" 4100 stall converter. 3/4 ton Dana 60 rear end, 4:10 gears.

Front suspension consists of Moog ball joints, tie rod ends, etc. ECE drop springs, drop spindles, 3/4-1/2 ton conversion, disc brakes. The rear has a custom 4-link with Aldan Eagle coil overs.

The body is all steel. Complete interior.

It's driven on the street to work and back every day and hauls my 3 year old daughter to grandmas house!
Your truck is now on my desktop! Awsome build, and props for keeping it a DD! How do you like the Spintechs?
__________________
1972 Custom 1500 Long Step 250 I6, 4spd
1974 F350 cummins/4x4 conversion (hopefully)
83gmc4x4 is offline   Reply With Quote
Old 02-10-2012, 07:45 AM   #442
Handfull 54
Registered User
 
Handfull 54's Avatar
 
Join Date: Jul 2011
Location: Moorpark, California
Posts: 159
Re: How about some pics of High Performance haulers.

I probably don't fit in with these rocket ships but here is my 54. It's got a 489 with Brodix heads and a mighty Demon 850. Continental 3'000stall converter, turbo 400, and a 9" with 4.56 gears. It has about 500 miles on it and I just drive it on the weekends. I did 95% of it in my 2 car garage. I run 31x18.50x15 MT Sportsmans which seem kind of hard. Will probably go to same size Hoosier radials in the future. There are some outstanding trucks on these pages. I have a few more things to do before I'm done but at least it's on the road. Best wishes to all of you out there.
Attached Images
     
Handfull 54 is offline   Reply With Quote
Old 02-10-2012, 10:03 AM   #443
thirdstreettito
Resident of Here
 
thirdstreettito's Avatar
 
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
Re: How about some pics of High Performance haulers.

That thing is the sex! Nice!
__________________
~Bradley~
2004 Black GTO LS2/T56 too much to list

Miss having a truck
thirdstreettito is offline   Reply With Quote
Old 02-11-2012, 12:46 AM   #444
65Pickup
Registered User
 
65Pickup's Avatar
 
Join Date: Jun 2010
Location: Vancouver Island BC
Posts: 652
Re: How about some pics of High Performance haulers.

Beautiful truck, just badass... love the color. What shifter you running?
__________________
65Pickup is offline   Reply With Quote
Old 02-11-2012, 09:25 AM   #445
Handfull 54
Registered User
 
Handfull 54's Avatar
 
Join Date: Jul 2011
Location: Moorpark, California
Posts: 159
Re: How about some pics of High Performance haulers.

Thanks for the kind words. The shifter is from Precision Performance Products in Cerritos California. My model is the Kwik Shift 1. Each one is built by hand one at a time. I went to the shop and picked mine up. He assembled it while I waited. Great shifter. There are other models and attachments available. I added a piece of 5x7 mirror finish stainless to raise the shifter off the floor. Their web site is
precisionperformance.com. Hope this helps.
Handfull 54 is offline   Reply With Quote
Old 02-13-2012, 10:35 PM   #446
bustedknuckles
Registered User
 
bustedknuckles's Avatar
 
Join Date: Nov 2011
Location: TEXAS
Posts: 179
Re: How about some pics of High Performance haulers.

update:

__________________
84 GMCummins

91 CCSB Dually

american squarebody association
bustedknuckles is offline   Reply With Quote
Old 02-15-2012, 08:46 AM   #447
Camaro_nut2001
Chevy Lover Till The End.
 
Camaro_nut2001's Avatar
 
Join Date: Dec 2009
Location: Mascot TN.
Posts: 795
Re: How about some pics of High Performance haulers.

Quote:
Originally Posted by Handfull 54 View Post
I probably don't fit in with these rocket ships but here is my 54. It's got a 489 with Brodix heads and a mighty Demon 850. Continental 3'000stall converter, turbo 400, and a 9" with 4.56 gears. It has about 500 miles on it and I just drive it on the weekends. I did 95% of it in my 2 car garage. I run 31x18.50x15 MT Sportsmans which seem kind of hard. Will probably go to same size Hoosier radials in the future. There are some outstanding trucks on these pages. I have a few more things to do before I'm done but at least it's on the road. Best wishes to all of you out there.
Very nice!!!
__________________
1969 Chevy SWB Big Block - Under the knife as of 12/26/2011
1989 Chevy Silverado, 4X4 - Daily Driver
1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck
1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original.
Members I've met: BamaBaxter,

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359
Camaro_nut2001 is offline   Reply With Quote
Old 02-15-2012, 10:07 AM   #448
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Arrow Re: How about some pics of High Performance haulers.

Quote:
Originally Posted by Handfull 54 View Post
I probably don't fit in with these rocket ships but here is my 54. It's got a 489 with Brodix heads and a mighty Demon 850. Continental 3'000stall converter, turbo 400, and a 9" with 4.56 gears. It has about 500 miles on it and I just drive it on the weekends. I did 95% of it in my 2 car garage. I run 31x18.50x15 MT Sportsmans which seem kind of hard. Will probably go to same size Hoosier radials in the future. There are some outstanding trucks on these pages. I have a few more things to do before I'm done but at least it's on the road. Best wishes to all of you out there.
That's One Bad Mamma Jamma 5 Window!
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 02-15-2012, 10:13 AM   #449
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Talking Re: How about some pics of High Performance haulers.

Not mine but............
Worlds Fastest Pickup Truck! - Fast Freddy's 1966 Pro Mod Chevy Pickup
http://67-72chevytrucks.com/vboard/s...d.php?t=506582

__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 02-20-2012, 01:32 AM   #450
nebdrummer
Registered User
 
nebdrummer's Avatar
 
Join Date: Dec 2008
Location: Nebraska
Posts: 390
Re: How about some pics of High Performance haulers.

Lot of work to do yet.

__________________
1950 3600. 370cid, th400, 9", billet 80mm turbo under the bed, 4 link coilovers, hoping for a single digit!

http://67-72chevytrucks.com/vboard/s...d.php?t=380212
nebdrummer is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com