Tootsie build for my mother with cancer - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lower · 03-31-2012, 09:36 PM

Twin turbo ls motor wouldnt be high maintence, that Hilborn would look awesome though. Hope your mother recovers quickly, I've lost a family member to cancer as well.

ddubbs · 03-31-2012, 10:40 PM

Eric are you going to start a build thread at porterbuilts website? Can't wait to see the frame when built!!!!
Posted via Mobile Device

5windowpickup · 04-01-2012, 12:39 AM

I'm subscribing to this one! As far as a motor goes I would do a nasty ls motor with a magnacharger or kenne bell maybe even a stack injection. Clean up the motor with some finned valve covers and hide the coils to still give it an old school feel. It would probably be more reliable and make more power than a sbc. Not matter what you do I'm sure it will be bad ass!

JRE · 04-01-2012, 01:29 AM

I'm also getting ready to build a tribute truck for my Sister Inlaw who is fighting Brain Cancer. Love the direction you're going with you're build. I'd go with the blowen LS motor. Prayers going out to you're mother.

*truckmanloco* · 04-01-2012, 03:46 AM

Eric are you running the stock frame rails?

big_al_71 · 04-01-2012, 08:59 AM

I am sure it is going to look, sound and run terrific....

72BlckButy · 04-01-2012, 05:38 PM

Subscribed Eric... our best to your mom.

65Custom · 04-01-2012, 06:35 PM

Subscribed too! and your mother is in our prayers

**Glorybound13** · 04-02-2012, 10:05 AM

I think an LSX motor with a roots type blower would be bad. Low maintenance, just get it set up and run with it. If you went with a polished blower, it would keep with the theme of the polished rearend and trans. Love the idea of the LEDs in the bed through the plexiglass. Can't wait to see more pics.

**superflysteiny** · 04-02-2012, 11:28 AM

Quote:

Originally Posted by truckmanloco

Eric are you running the stock frame rails?

no

**superflysteiny** · 04-02-2012, 11:32 AM

Quote:

Originally Posted by 5windowpickup

I'm subscribing to this one! As far as a motor goes I would do a nasty ls motor with a magnacharger or kenne bell maybe even a stack injection. Clean up the motor with some finned valve covers and hide the coils to still give it an old school feel. It would probably be more reliable and make more power than a sbc. Not matter what you do I'm sure it will be bad ass!

I am tipping back and forth i am going 871 with injector hat/i am going to look at the cost of ls vs small block. I am in the middle of buying a building which is eating my money so the motor had to be some what cost effective. I dont want to go over kill. This is the reason I am not going twin turbo. Also no one knows you have the turbos but they can hear the grass roots

**superflysteiny** · 04-02-2012, 11:33 AM

Quote:

Originally Posted by JRE

I'm also getting ready to build a tribute truck for my Sister Inlaw who is fighting Brain Cancer. Love the direction you're going with you're build. I'd go with the blowen LS motor. Prayers going out to you're mother.

Sorry about your sister in law thats tough. I hope she gets better

**superflysteiny** · 04-02-2012, 11:56 AM

Quote:

Originally Posted by ddubbs

Eric are you going to start a build thread at porterbuilts website? Can't wait to see the frame when built!!!!
Posted via Mobile Device

Yes just need to get the time

**superflysteiny** · 04-02-2012, 12:00 PM

Quote:

Originally Posted by Lower

Twin turbo ls motor wouldnt be high maintence, that Hilborn would look awesome though. Hope your mother recovers quickly, I've lost a family member to cancer as well.

My experiance with turbos and blower motors is turbos are more up keep. I have had 700 horse power single turbo motors and was always messing with maintance on the turbos. Just my experiance. I know turbo motors will make a stupid amount of power but grass roots are plain nasty looking. Plus I have a line on a bds blower for great price

Low Elco · 04-02-2012, 12:44 PM

Can't be anything but a great truck from your place. All good vibes your mom's way.
Posted via Mobile Device

7dee2 · 04-02-2012, 12:53 PM

I lost my Mom last month to a respiratory problem. I really hope your mother beats this Eric...

Looking forward to another Superflysteiny build! Subscribed

ddubbs · 04-02-2012, 02:44 PM

Lsx blower with the hilborn injection. That would definetly look sikk!!!!!

*truckmanloco* · 04-02-2012, 02:54 PM

Hey Eric if you decide to get rid of the stock frame let me know ive got a buddy looking for one.

*truckmanloco* · 04-02-2012, 04:13 PM

Eric quick idea for the door graphic.

**superflysteiny** · 04-02-2012, 05:24 PM

Quote:

Originally Posted by truckmanloco

Hey Eric if you decide to get rid of the stock frame let me know ive got a buddy looking for one.

Selling complete frame everything is brand new and restored. All new ss brake lines, new paint 6 on 6 discs. All brand new. Let me know. Later

**superflysteiny** · 04-02-2012, 05:25 PM

Like the spark plug

**superflysteiny** · 04-02-2012, 05:26 PM

Quote:

Originally Posted by 7dee2

I lost my Mom last month to a respiratory problem. I really hope your mother beats this Eric...

Looking forward to another Superflysteiny build! Subscribed

Sorry about your loss. Thank you

duallyjams · 04-02-2012, 07:50 PM

Yeah turbos are silent and very powerful but a big ol blower with a injector on top of it say's yeah I'm loud and proud.

bigkountry · 04-02-2012, 09:16 PM

My father in law and me are very close and he was diagnosed with stage 4 pancreatic cancer a few months ago. He has went through several rounds of chemo and is fighting it tooth and nail, needless to say it has turned our family upside down.

This is an awesome gesture for your mother and I'm sure it will be a killer ride that will make her very proud.

From our family to yours, we wish your mom and family the best.

Bennett68C10 · 04-02-2012, 10:41 PM

Wow sorry to hear about your mother, my prayers go out to her for a speedy recovery. Can't wait to see how this build turns out. Everything you build is top notch.
Posted via Mobile Device

03-31-2012, 09:36 PM	#76
Lower Registered User Join Date: Feb 2012 Location: Depew, OK Posts: 204	Re: Tootsie build for my mother with cancer Twin turbo ls motor wouldnt be high maintence, that Hilborn would look awesome though. Hope your mother recovers quickly, I've lost a family member to cancer as well. __________________ ~Jon Ol Green 1970 K10ish LWB,454/400/205, been in family since new. My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=516056

03-31-2012, 10:40 PM	#77
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Tootsie build for my mother with cancer Eric are you going to start a build thread at porterbuilts website? Can't wait to see the frame when built!!!! Posted via Mobile Device

04-01-2012, 12:39 AM	#78
5windowpickup Registered User Join Date: Oct 2008 Location: Pittsburgh, PA Posts: 115	Re: Tootsie build for my mother with cancer I'm subscribing to this one! As far as a motor goes I would do a nasty ls motor with a magnacharger or kenne bell maybe even a stack injection. Clean up the motor with some finned valve covers and hide the coils to still give it an old school feel. It would probably be more reliable and make more power than a sbc. Not matter what you do I'm sure it will be bad ass! __________________ Josh Hart High Octane Hotrods 71 C10 Bagged work in progress driver Build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=365912

04-01-2012, 01:29 AM	#79
JRE Registered User Join Date: Mar 2010 Location: Milwaukie Oregon Posts: 547	Re: Tootsie build for my mother with cancer I'm also getting ready to build a tribute truck for my Sister Inlaw who is fighting Brain Cancer. Love the direction you're going with you're build. I'd go with the blowen LS motor. Prayers going out to you're mother.

04-01-2012, 03:46 AM	#80
truckmanloco Account Suspended Join Date: Nov 2007 Location: San Diego ca Posts: 717	Re: Tootsie build for my mother with cancer Eric are you running the stock frame rails?

04-01-2012, 08:59 AM	#81
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Tootsie build for my mother with cancer I am sure it is going to look, sound and run terrific.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-01-2012, 05:38 PM	#82
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tootsie build for my mother with cancer Subscribed Eric... our best to your mom. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-01-2012, 06:35 PM	#83
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: Tootsie build for my mother with cancer Subscribed too! and your mother is in our prayers __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

04-02-2012, 10:05 AM	#84
Glorybound13 Junior Member Join Date: Dec 2010 Location: Dallas, NC Posts: 70	Re: Tootsie build for my mother with cancer I think an LSX motor with a roots type blower would be bad. Low maintenance, just get it set up and run with it. If you went with a polished blower, it would keep with the theme of the polished rearend and trans. Love the idea of the LEDs in the bed through the plexiglass. Can't wait to see more pics. __________________ 1969 CST-10 - "Glory Bound" - build in process (slow going) 1971 Cheyenne 10 2006 GMC Yukon XL Denali Isaiah 46:4 - I will be your God through all your lifetime, yes, even when your hair is white with age. I made you and I will care for you. I will carry you along and be your Savior.

04-02-2012, 12:44 PM	#90
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Tootsie build for my mother with cancer Can't be anything but a great truck from your place. All good vibes your mom's way. Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

04-02-2012, 12:53 PM	#91
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,956	Re: Tootsie build for my mother with cancer I lost my Mom last month to a respiratory problem. I really hope your mother beats this Eric... Looking forward to another Superflysteiny build! Subscribed __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 Last edited by 7dee2; 04-02-2012 at 01:21 PM.

04-02-2012, 02:44 PM	#92
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Tootsie build for my mother with cancer Lsx blower with the hilborn injection. That would definetly look sikk!!!!! __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

04-02-2012, 02:54 PM	#93
truckmanloco Account Suspended Join Date: Nov 2007 Location: San Diego ca Posts: 717	Re: Tootsie build for my mother with cancer Hey Eric if you decide to get rid of the stock frame let me know ive got a buddy looking for one. Last edited by truckmanloco; 04-02-2012 at 02:55 PM. Reason: spelling erroe=r

04-02-2012, 05:25 PM	#96
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Like the spark plug __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

04-02-2012, 07:50 PM	#98
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Tootsie build for my mother with cancer Yeah turbos are silent and very powerful but a big ol blower with a injector on top of it say's yeah I'm loud and proud. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

04-02-2012, 09:16 PM	#99
bigkountry Family Man Join Date: May 2010 Location: Western Kentucky Posts: 80	Re: Tootsie build for my mother with cancer My father in law and me are very close and he was diagnosed with stage 4 pancreatic cancer a few months ago. He has went through several rounds of chemo and is fighting it tooth and nail, needless to say it has turned our family upside down. This is an awesome gesture for your mother and I'm sure it will be a killer ride that will make her very proud. From our family to yours, we wish your mom and family the best. __________________ 70 SWB....in peices waiting for the new shop to be built!

04-02-2012, 10:41 PM	#100
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Tootsie build for my mother with cancer Wow sorry to hear about your mother, my prayers go out to her for a speedy recovery. Can't wait to see how this build turns out. Everything you build is top notch. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

Register or Log In To remove these advertisements.