SC Rust free 72 cab (repaired) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red69ss · 08-05-2012, 09:32 PM

NEW PRICE..... $500

This is a 72 ac cab that I have replaced the outer floorboard/inner rockers, outer rockers, A pillar extensions, cab corners and front cab supports on both sides. I then sand blasted the bottum of the cab, painted it and coated it with 3M body shutz undercoating. I also sanded all the paint from the roof and put it in primer.

I then blasted the firewall and began smoothing it and doing the body work. the firewall is not complete but is close to finished. I ordered a mirror piece for the rounded part of the firewall gutter and cut it to fit, but have not welded it in yet.

This will make someone a nice cab for thier project, the only problem area is the wire gutter had pin holes in it and I just filled them with weld which looks ugly(see pic). I was going to smooth it with seam sealer before paint but you could cap it also.

I want $600 for the cab, cash only, local pick up(also for sale locally).

Pics of the work are in my build thread starting on page two here....http://67-72chevytrucks.com/vboard/s...=258297&page=2

I will try to get some better pics this week. I will also throw in the cab dolly I made out of a chassis and the drivers door I took apart and repaired.

red69ss · 08-05-2012, 09:35 PM

more pics

frednoah · 08-05-2012, 09:49 PM

This thing got a title?

red69ss · 08-05-2012, 10:00 PM

Quote:

Originally Posted by frednoah

This thing got a title?

no forgot to mention, no title.

red69ss · 08-07-2012, 01:09 PM

ttt........ I have a lot of nice parts I've collected for this project that I'm going to sell after I sell this cab.

red69ss · 08-09-2012, 09:31 PM

ttt ..... for new price of $500.

red69ss · 08-12-2012, 05:20 PM

ttt.... new price of $500.

Leroy-B1 · 08-12-2012, 07:02 PM

Interested in this PM sent

oldblue1968chevy · 08-13-2012, 12:41 AM

Good deal minus the whole title situation..wish you were in TN

red69ss · 08-13-2012, 07:40 AM

Quote:

Originally Posted by Leroy-B1

Interested in this PM sent

pm returned , I'll call you.

Quote:

Originally Posted by oldblue1968chevy

Good deal minus the whole title situation..wish you were in TN

Yes it is considering the amount of work I have in this. I hope the lack of a title isn't an issue. If leroy doesn't take it come on down.

frednoah · 08-13-2012, 09:07 AM

If I knew I could swap it out with no issues from the dmv/police, I would be down there in a minute.
Posted via Mobile Device

dmw319 · 08-13-2012, 10:28 AM

Quote:

Originally Posted by frednoah

If I knew I could swap it out with no issues from the dmv/police, I would be down there in a minute.
Posted via Mobile Device

me too!

REDBOY01 · 08-13-2012, 12:04 PM

If you still have the cab. I will take it. Call me at ( 843) 263-9804. I will be out the house the rest of today. Headed to columbia,s.c.

red69ss · 08-13-2012, 04:39 PM

Quote:

Originally Posted by REDBOY01

If you still have the cab. I will take it. Call me at ( 843) 263-9804. I will be out the house the rest of today. Headed to columbia,s.c.

I'm going to give leroy a chance to turn it down first, but if he backs out you will be first in line.

Leroy-B1 · 08-13-2012, 06:25 PM

I'll take it will call you in morning to arrange....thanks buddy
Posted via Mobile Device

REDBOY01 · 08-14-2012, 12:10 PM

Thanks for the reply . Look like you are getting a good cab leroy.

08-05-2012, 09:32 PM	#1
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Rust free 72 cab (repaired) NEW PRICE..... $500 This is a 72 ac cab that I have replaced the outer floorboard/inner rockers, outer rockers, A pillar extensions, cab corners and front cab supports on both sides. I then sand blasted the bottum of the cab, painted it and coated it with 3M body shutz undercoating. I also sanded all the paint from the roof and put it in primer. I then blasted the firewall and began smoothing it and doing the body work. the firewall is not complete but is close to finished. I ordered a mirror piece for the rounded part of the firewall gutter and cut it to fit, but have not welded it in yet. This will make someone a nice cab for thier project, the only problem area is the wire gutter had pin holes in it and I just filled them with weld which looks ugly(see pic). I was going to smooth it with seam sealer before paint but you could cap it also. I want $600 for the cab, cash only, local pick up(also for sale locally). Pics of the work are in my build thread starting on page two here....http://67-72chevytrucks.com/vboard/s...=258297&page=2 I will try to get some better pics this week. I will also throw in the cab dolly I made out of a chassis and the drivers door I took apart and repaired. Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 08-12-2012 at 05:18 PM.

08-05-2012, 09:35 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Rust free 72 cab (repaired) more pics Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-05-2012, 09:49 PM	#3
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Rust free 72 cab (repaired) This thing got a title?

08-07-2012, 01:09 PM	#5
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Rust free 72 cab (repaired) ttt........ I have a lot of nice parts I've collected for this project that I'm going to sell after I sell this cab. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-09-2012, 09:31 PM	#6
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Rust free 72 cab (repaired) ttt ..... for new price of $500. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 08-12-2012 at 05:18 PM.

08-12-2012, 05:20 PM	#7
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Rust free 72 cab (repaired) ttt.... new price of $500. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-12-2012, 07:02 PM	#8
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Rust free 72 cab (repaired) Interested in this PM sent

08-13-2012, 12:41 AM	#9
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Rust free 72 cab (repaired) Good deal minus the whole title situation..wish you were in TN __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-13-2012, 09:07 AM	#11
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Rust free 72 cab (repaired) If I knew I could swap it out with no issues from the dmv/police, I would be down there in a minute. Posted via Mobile Device

08-13-2012, 12:04 PM	#13
REDBOY01 Registered User Join Date: Jan 2012 Location: Beaufort, S.C. Posts: 5	Re: Rust free 72 cab (repaired) If you still have the cab. I will take it. Call me at ( 843) 263-9804. I will be out the house the rest of today. Headed to columbia,s.c.

08-13-2012, 06:25 PM	#15
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Rust free 72 cab (repaired) I'll take it will call you in morning to arrange....thanks buddy Posted via Mobile Device

08-14-2012, 12:10 PM	#16
REDBOY01 Registered User Join Date: Jan 2012 Location: Beaufort, S.C. Posts: 5	Re: Rust free 72 cab (repaired) Thanks for the reply . Look like you are getting a good cab leroy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.