MO Parting a 68 C10 longbed, need anything?? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1old67 · 02-06-2013, 07:44 PM

How much for the gas and brake pedals shipped to 77039 pending shape and better pix. Thanks for your time
Posted via Mobile Device

dirish · 02-06-2013, 07:47 PM

Quote:

Originally Posted by specialtyretail

Hey there. let me do some figuring and also make sure a young man that hangs out with us here at the shop doesn't need the vents. I will get you some figures as quick as i can. Thanks, Fred.

Thanks! PM me please so I'm sure to see. Thanks Daniel
Posted via Mobile Device

**specialtyretail** · 02-06-2013, 07:49 PM

Quote:

Originally Posted by 1old67

How much for the gas and brake pedals shipped to 77039 pending shape and better pix. Thanks for your time
Posted via Mobile Device

Do you just need the covers on the brake pedal or the whole pedal assembly??? Thanks, Fred

**specialtyretail** · 02-06-2013, 07:52 PM

Rear view mirror sold. Thanks, Fred

1old67 · 02-06-2013, 09:22 PM

Just the plastic pedals with the trim. Brake and gas
Posted via Mobile Device

Dale99 · 02-06-2013, 10:19 PM

How about the passenger fender? I know you said you would not ship, but I could make it a days drive in a few weeks.

**specialtyretail** · 02-07-2013, 08:46 AM

Quote:

Originally Posted by Dale99

How about the passenger fender? I know you said you would not ship, but I could make it a days drive in a few weeks.

Hey there. It is typical of all them, rust in the lower cup. Not as bad as most but not real good either. If you can use it, $25.00. Thanks, Fred.

russsmith32 · 02-07-2013, 08:52 AM

i'll pass thank you

**specialtyretail** · 02-07-2013, 09:03 AM

Quote:

Originally Posted by russsmith32

i'll pass thank you

Hey russ. Tell you what, if you can use them at all, shoot me a realistic offer and they are probably yours. Shipping would be about $5.50 . Think about and let me know. Thanks, Fred.

Dale99 · 02-07-2013, 09:15 AM

Quote:

Originally Posted by specialtyretail

Hey there. It is typical of all them, rust in the lower cup. Not as bad as most but not real good either. If you can use it, $25.00. Thanks, Fred.

ok. I will pass, I know I am looking for a miracle fender with no rust.

Elliot949 · 02-07-2013, 09:44 AM

I would like the complete ignition Switch with key and matching door locks... shipped to 67156

**specialtyretail** · 02-07-2013, 10:05 AM

Quote:

Originally Posted by Elliot949

I would like the complete ignition Switch with key and matching door locks... shipped to 67156

Hey there. I already have someone here on this post ask about the ignition switch, sorry. I don't have a key for the door lock cylinders, but would still sell them if you needed them. Let me know. Thanks, Fred.

Elliot949 · 02-07-2013, 10:59 AM

Quote:

Originally Posted by specialtyretail

Hey there. I already have someone here on this post ask about the ignition switch, sorry. I don't have a key for the door lock cylinders, but would still sell them if you needed them. Let me know. Thanks, Fred.

Thanks Fred but I am looking for a complete matched set... My truck was stolen and the ruined the ignition switch and stole the doors, front clip, bed and complete drivetrain... so I am in the process of patching it back together... I am down to just a few small parts like this... Let me know if he changes his mind... Thanks... Dan

JRANGER · 02-07-2013, 11:13 AM

What blue is that? How is the condition of the bed?

aventur1 · 02-07-2013, 11:28 AM

I'll take the front turn signals if the plug in is the T shape style.
83704, Boise , Idaho

**specialtyretail** · 02-07-2013, 12:03 PM

Quote:

Originally Posted by JRANGER

What blue is that? How is the condition of the bed?

Hey there. The bed has a liner in it and is full of,,, stuff,, for lack of a better word. I will get it cleared out Saturday and get you some pics. If you can use it I will make you a deal on it. Thanks, Fred.

JRANGER · 02-07-2013, 12:04 PM

Depends on the color...My body is looking for a specific stock blue...

JRANGER · 02-07-2013, 12:05 PM

*buddy

Rusbuilt · 02-07-2013, 12:47 PM

Fred, Jeff (Jranger) has been helping me keep an eye out for a bed to match my cab on my 68 dually build. I'm afraid this one is too light. I am looking for a dark blue bed.. Thanks for keeping an eye out Jeff!

**specialtyretail** · 02-07-2013, 03:31 PM

Quote:

Originally Posted by aventur1

I'll take the front turn signals if the plug in is the T shape style.
83704, Boise , Idaho

Hey there. I will try to check on them tonight if I can at all, grandaughter is up tonight and she is more fun than these trucks. Thanks, Fred

SoCal68 · 02-07-2013, 05:07 PM

Do you have the bed to frame mounts, second pair from the front? How much with shipping to CA 90502. Thanks

**specialtyretail** · 02-07-2013, 06:32 PM

Quote:

Originally Posted by SoCal68

Do you have the bed to frame mounts, second pair from the front? How much with shipping to CA 90502. Thanks

Hey there. I am sure they are there, it will be a while before we get to that point in the tear down. Thanks, Fred.

buddylee · 02-07-2013, 07:45 PM

Seat belts?
Posted via Mobile Device

mvesr · 02-07-2013, 10:09 PM

Hi Fred. The photos are real dark and cannot make out the brackets too well, but if they are what I need, how much with shipping to 28704?

Thanks-Mika

philB · 02-07-2013, 10:38 PM

do you have a headliner trim pieces?

02-06-2013, 07:44 PM	#51
1old67 Registered User Join Date: May 2012 Location: Houston TX Posts: 113	Re: Parting a 68 C10 longbed, need anything?? How much for the gas and brake pedals shipped to 77039 pending shape and better pix. Thanks for your time Posted via Mobile Device

02-06-2013, 07:52 PM	#54
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting a 68 C10 longbed, need anything?? Rear view mirror sold. Thanks, Fred

02-06-2013, 09:22 PM	#55
1old67 Registered User Join Date: May 2012 Location: Houston TX Posts: 113	Re: Parting a 68 C10 longbed, need anything?? Just the plastic pedals with the trim. Brake and gas Posted via Mobile Device

02-06-2013, 10:19 PM	#56
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Parting a 68 C10 longbed, need anything?? How about the passenger fender? I know you said you would not ship, but I could make it a days drive in a few weeks. __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

02-07-2013, 08:52 AM	#58
russsmith32 Registered User Join Date: Oct 2012 Location: church hill tn Posts: 52	Re: Parting a 68 C10 longbed, need anything?? i'll pass thank you

02-07-2013, 09:44 AM	#61
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Parting a 68 C10 longbed, need anything?? I would like the complete ignition Switch with key and matching door locks... shipped to 67156

02-07-2013, 11:13 AM	#64
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting a 68 C10 longbed, need anything?? What blue is that? How is the condition of the bed? __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

02-07-2013, 11:28 AM	#65
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Parting a 68 C10 longbed, need anything?? I'll take the front turn signals if the plug in is the T shape style. 83704, Boise , Idaho __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-07-2013, 12:04 PM	#67
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting a 68 C10 longbed, need anything?? Depends on the color...My body is looking for a specific stock blue... __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

02-07-2013, 12:05 PM	#68
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting a 68 C10 longbed, need anything?? buddy __________________ PLEASE HELP WITH PROJECT UNDERHAULIN* http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

02-07-2013, 12:47 PM	#69
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Parting a 68 C10 longbed, need anything?? Fred, Jeff (Jranger) has been helping me keep an eye out for a bed to match my cab on my 68 dually build. I'm afraid this one is too light. I am looking for a dark blue bed.. Thanks for keeping an eye out Jeff! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-07-2013, 05:07 PM	#71
SoCal68 Registered User Join Date: Jun 2002 Location: Southern California Posts: 22	Re: Parting a 68 C10 longbed, need anything?? Do you have the bed to frame mounts, second pair from the front? How much with shipping to CA 90502. Thanks Attached Images

02-07-2013, 07:45 PM	#73
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: Parting a 68 C10 longbed, need anything?? Seat belts? Posted via Mobile Device

02-07-2013, 10:09 PM	#74
mvesr Registered User Join Date: Sep 2012 Location: Arden NC Posts: 185	Re: Parting a 68 C10 longbed, need anything?? Hi Fred. The photos are real dark and cannot make out the brackets too well, but if they are what I need, how much with shipping to 28704? Thanks-Mika

02-07-2013, 10:38 PM	#75
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: Parting a 68 C10 longbed, need anything?? do you have a headliner trim pieces?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.