Hydroboost Mounting Plates

[exploderjim]

Now I have found a 08 and a 2012 Master cylinder from a Silverado HD running 4 wheel disc brakes. would that work and two i would still need to run my CPP porportioning valve as well right? Here is my issue I just want to confirm that I'm understanding this correctly and that it will bolt to the master cylinder. The 2012 is a hydroboost set up as well. Anyways any help would be appreciated/

[wheel1968]

Hey Capt'n i have a 78 chev mini home hydro that'll work right it was a 1 ton looks like it would ?

[Captainfab]

Yes, that will work. Once you remove the factory mounting plate, the hydroboost units themselves are all the same. That master cylinder might be a little large if you are going to run it on a C10. I would just bolt on an appropriate C10 master cylinder.

Originally Posted by wheel1968

Hey Capt'n i have a 78 chev mini home hydro that'll work right it was a 1 ton looks like it would ?

[Captainfab]

I do not know if either of those masters will bolt up to your '97 Astro hydroboost. As I said earlier, I do not have much experience with the newer masters as what you are looking for. Some of the newer masters bolt up differently. If you want to go with a master cylinder as new as one of those, I would suggest purchasing the master and hydroboost as a unit. If your CPP proportioning valve is for a disc/disc system, then yes you should run that one.

Originally Posted by exploderjim

Now I have found a 08 and a 2012 Master cylinder from a Silverado HD running 4 wheel disc brakes. would that work and two i would still need to run my CPP porportioning valve as well right? Here is my issue I just want to confirm that I'm understanding this correctly and that it will bolt to the master cylinder. The 2012 is a hydroboost set up as well. Anyways any help would be appreciated/