Porterbuilt Dropmember - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldman3** · 06-27-2013, 11:17 PM

Sweet....Jim

66C06 · 06-30-2013, 04:02 AM

Got mine in last week!!!!!!!!!

rip2174 · 07-03-2013, 11:52 AM

What are the AC options on an 80's model when using dropmember with 20's?

timmytimm3 · 07-09-2013, 09:44 AM

The first "version 4" C4 dropmember

wayno · 07-10-2013, 10:30 AM

I'll add a few pictures to the mix - getting the front tied up now.

BigDaddyV · 07-10-2013, 04:03 PM

Quote:

Originally Posted by timmytimm3

The first "version 4" C4 dropmember

So Sweet! Love it!

Quote:

Originally Posted by wayno

I'll add a few pictures to the mix - getting the front tied up now.

Deffinantly Looking killer!

izzy_Britton · 07-13-2013, 12:32 AM

Ummm... YEAH! That is what I want!!! dig that idea. I have c4 front and rear crossmembers and control arms, been trying to figure out the best way to use them. Keep the pictures coming brother! I love it!

Quote:

Originally Posted by timmytimm3

The first "version 4" C4 dropmember

Boost2Bags · 07-16-2013, 08:40 AM

Quote:

Originally Posted by rip2174

What are the AC options on an 80's model when using dropmember with 20's?

Mine is a '78 with 255/35/20 up front. A/C didn't fit. With a little modification it might though, it's close.

jimmydean · 07-16-2013, 01:12 PM

Quote:

Originally Posted by izzy_Britton

Ummm... YEAH! That is what I want!!! dig that idea. I have c4 front and rear crossmembers and control arms, been trying to figure out the best way to use them. Keep the pictures coming brother! I love it!

Nate's C4 stuff is sooo sweet. I bought a Corvette just to run it, but then couldn't cut it up

The only thing for me was the cost of the shockwaves were too much for my budget. If I win the lotto, I would run Nate's C4 front/rear in a second.

timmytimm3 · 07-16-2013, 01:15 PM

Quote:

Originally Posted by jimmydean

Nate's C4 stuff is sooo sweet. I bought a Corvette just to run it, but then couldn't cut it up

The only thing for me was the cost of the shockwaves were too much for my budget. If I win the lotto, I would run Nate's C4 front/rear in a second.

I'm running it with coilovers for that reason. Plus air management cost and complexity.

54Caddy · 07-17-2013, 01:36 AM

2 months and 2 weeks still no show of the parts.. That's 10 weeks total..............

jimmydean · 07-17-2013, 03:49 PM

Quote:

Originally Posted by timmytimm3

I'm running it with coilovers for that reason. Plus air management cost and complexity.

I wanted to run the select ride Shockwaves. Similar to the FX3 suspension that was on my C4 Corvette using an actuator adjusted valve to switch from performance to comfort mode on the fly. :drool:

After my first air truck, I will never go back to static dropped vehicles again.

Rusbuilt · 07-17-2013, 08:07 PM

Quote:

Originally Posted by 54Caddy

2 months and 2 weeks still no show of the parts.. That's 10 weeks total..............

Its worth the wait!

broey · 07-17-2013, 11:26 PM

is anyone else following porterbuilt on Instagram?? his newest version of the dropmember is so awesome!!

jimmydean · 07-18-2013, 01:00 PM

Quote:

Originally Posted by broey

is anyone else following porterbuilt on Instagram?? his newest version of the dropmember is so awesome!!

Wow, making work of the new press brake and water jet quite nicely.

**lolife99** · 08-20-2013, 10:22 AM

So Nate,... what is the name for this "newest" Dropmember???

Bennett68C10 · 08-20-2013, 10:28 AM

The new dropmember looks sweet
Posted via Mobile Device

PBFAB.COM · 08-20-2013, 10:30 AM

Quote:

Originally Posted by lolife99

So Nate,... what is the name for this "newest" Dropmember???

I was thinking about calling it the Version: "Stop wasting my time changing things and move on to another product already". But felt that it didn't roll off the tongue very well.

This will just be known as the Dropmember (technically it's the 5th design version and incorporates a few touches from each of the previous ones along with a few added features).... I am done tweaking and changing things... for now.

I am extremely pleased with this one... the new equipment has really been paying off.

Nate

Dinos63 · 08-20-2013, 03:23 PM

very very nice ....my next project will have one for sure

thotfulspot · 08-20-2013, 03:40 PM

Which years will that be for? Looks like it might allow more exhaust clearance for the trifives.
Posted via Mobile Device

PBFAB.COM · 08-20-2013, 03:44 PM

Quote:

Originally Posted by thotfulspot

Which years will that be for? Looks like it might allow more exhaust clearance for the trifives.
Posted via Mobile Device

This design is used for all our current kits 55-87. Exhaust clearances should be the same.

JNJchev77 · 08-20-2013, 03:48 PM

Redesign every 18 months/ 2 years = Smart Business!!

New DM looks killer Nate! My next project will have one... Maybe an F100 DM

ulakovic22 · 08-20-2013, 03:49 PM

Whose arms are those, MMW?

thotfulspot · 08-20-2013, 03:50 PM

Quote:

Originally Posted by Porterbuilt Street Rods

This design is used for all our current kits 55-87. Exhaust clearances should be the same.

Oh well. I was hoping there would be a solution besides Delmo's custom manifolds for LS motors.
Posted via Mobile Device

Zoomin · 08-20-2013, 03:55 PM

Quote:

Originally Posted by lolife99

So Nate,... what is the name for this "newest" Dropmember???

Quote:

Originally Posted by Porterbuilt Street Rods

I was thinking about calling it the Version: "Stop wasting my time changing things and move on to another product already". But felt that it didn't roll off the tongue very well.

This will just be known as the Dropmember (technically it's the 5th design version and incorporates a few touches from each of the previous ones along with a few added features).... I am done tweaking and changing things... for now.

I am extremely pleased with this one... the new equipment has really been paying off.

Nate

May I suggest "Potato Peeler"?

I like the design of this one a lot!

06-27-2013, 11:17 PM	#276
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Porterbuilt Dropmember Sweet....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-30-2013, 04:02 AM	#277
66C06 Registered User Join Date: Oct 2012 Location: Rockwall, Tx Posts: 151	Re: Porterbuilt Dropmember Got mine in last week!!!!!!!!! __________________ 66 SWB Stepside: Project C-O6 06 ZO6 MSM 6spd 562/520rw N/A 06 Caddy CTS The Daily 07 Hayabusa - absolute chaos

07-03-2013, 11:52 AM	#278
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: Porterbuilt Dropmember What are the AC options on an 80's model when using dropmember with 20's?

07-09-2013, 09:44 AM	#279
timmytimm3 Registered User Join Date: Apr 2012 Location: CT Posts: 265	Re: Porterbuilt Dropmember The first "version 4" C4 dropmember __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad

07-10-2013, 10:30 AM	#280
wayno Registered User Join Date: Dec 2012 Location: Woolwich Twp, NJ Posts: 445	Re: Porterbuilt Dropmember I'll add a few pictures to the mix - getting the front tied up now. Attached Images __________________ 64 Step Side - The Mistress

07-17-2013, 01:36 AM	#286
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Porterbuilt Dropmember 2 months and 2 weeks still no show of the parts.. That's 10 weeks total.............. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

07-17-2013, 11:26 PM	#289
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Porterbuilt Dropmember is anyone else following porterbuilt on Instagram?? his newest version of the dropmember is so awesome!! __________________ Squarebody Syndicate

08-20-2013, 10:22 AM	#291
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,686	Re: Porterbuilt Dropmember So Nate,... what is the name for this "newest" Dropmember??? Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-20-2013, 10:28 AM	#292
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Porterbuilt Dropmember The new dropmember looks sweet Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

08-20-2013, 03:23 PM	#294
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Porterbuilt Dropmember very very nice ....my next project will have one for sure __________________ CHEVY ONLY... Nothin Else !

08-20-2013, 03:40 PM	#295
thotfulspot Registered User Join Date: Jan 2013 Location: Madison, WI Posts: 198	Re: Porterbuilt Dropmember Which years will that be for? Looks like it might allow more exhaust clearance for the trifives. Posted via Mobile Device

08-20-2013, 03:48 PM	#297
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Porterbuilt Dropmember Redesign every 18 months/ 2 years = Smart Business!! New DM looks killer Nate! My next project will have one... Maybe an F100 DM __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

08-20-2013, 03:49 PM	#298
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: Porterbuilt Dropmember Whose arms are those, MMW? __________________ Anthony '67 Shortstep (555/T56) '67 Parts Truck (TBA)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.