Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low Elco · 05-16-2013, 08:37 PM

Glad ya made it back, hope the move goes well, and a giant shop is in the offing! Then beat that sucker like a rented mule!
Posted via Mobile Device

DesertCat · 05-21-2013, 12:27 AM

Quote:

Originally Posted by jlsanborn

Man if you could make a video rowin through them gears I'd be stoked!!! I've got an M20 ready to go but the Boy showed up with a close ratio M21 and now I'm torn.. What gears you got in the rear again?

I have 3.08 in it now and actually isn't bad but will probably go the next step down (3.42 IIRC)

We'll see what we can do for a video

Quote:

Originally Posted by mcbassin

cool project, I'm in

ps I have actually seen worse rigging from a PO check THIS out......
My PO had a little mcgiver in him too.

Wow! That was shocking

might be the same guy... maybe he was just warming up on mine

Quote:

Originally Posted by Low Elco

Glad ya made it back, hope the move goes well, and a giant shop is in the offing! Then beat that sucker like a rented mule!
Posted via Mobile Device

Thanks! The move is nearly done, man what a pain. Where did all this stuff come from?

No giant shop for me this time but a very modest single and double garage. Going to be tight but better than working on a pad in the sun.

Rented mule...

jlsanborn · 06-27-2013, 03:44 PM

Settled in yet? Anxious to hear how the truck is going!

DesertCat · 09-02-2013, 06:49 PM

Guys, sorry for being gone so long. Had some life changing (Devastation) events and now I have to make some more changes (Reform).

In July we lost our littlest granddaughter. Needless to say I was on the next flights out of Afghanistan. I have also now left my high-danger-high-pay work as well.

After all the expenses were paid it became clear that I need to sell my toys. I will be selling the D&R truck and all the other parts and pieces I have accumulated over the last three years. I will be listing these shortly in the appropriate forum categories (please respect forum rules and ask questions in those threads, not in this thread).

Thank you all so much for your support,

Blake

**Palf70Step** · 09-02-2013, 08:19 PM

Sorry to hear that news. Our prayers go out to you and your family. Hope you stick around and hang out with out still.

mjensen · 09-02-2013, 08:22 PM

I'm sorry to read about the loss of a loved one. My thoughts are with you.

DesertCat · 09-02-2013, 09:04 PM

Quote:

Originally Posted by Palf70Step

Sorry to hear that news. Our prayers go out to you and your family. Hope you stick around and hang out with out still.

Quote:

Originally Posted by mjensen

I'm sorry to read about the loss of a loved one. My thoughts are with you.

Thanks Guys. It was really hard but we got through it. I have been checking in from time to time and hope to keep on hanging out here - great bunch of people here!
Maybe someday I will get back in the game but right now I need to take care of family. Maybe I can find a worse one to bring back

Thank you for the kind words,
Blake

Low Elco · 09-03-2013, 08:09 AM

Sorry to hear it, Blake. Hope the hurt heals soon. Take care of the clan, and don't forget to check in on us.

jlsanborn · 09-03-2013, 11:01 AM

Sorry to hear man. Hang in there, you're doing things right.

**Ol Blue K20** · 09-03-2013, 11:25 AM

My condolences and god bless you and yours. Hang in there.

DesertCat · 09-03-2013, 07:54 PM

Quote:

Originally Posted by Low Elco

Sorry to hear it, Blake. Hope the hurt heals soon. Take care of the clan, and don't forget to check in on us.

Quote:

Originally Posted by jlsanborn

Sorry to hear man. Hang in there, you're doing things right.

Quote:

Originally Posted by Ol Blue K20

My condolences and god bless you and yours. Hang in there.

Thanks guys, your very kind words mean a lot! God is truly good and merciful, He really is a present blessing in our lives especially when going through times like these. I pray He will bless you like He has us through this time.

mcbassin · 09-04-2013, 07:35 AM

So sorry to hear about your Grand daughter. I can only imagine the grief. God bless your family.

DesertCat · 09-07-2013, 12:58 AM

Quote:

Originally Posted by mcbassin

So sorry to hear about your Grand daughter. I can only imagine the grief. God bless your family.

Thank you friend!

gdavis · 12-04-2013, 07:30 PM

Quote:

Originally Posted by DesertCat

My wife told me she had the boys move it off the driveway because it had a small trans leak. Hmmm... wonder why it's leaking...

I would bet the drive shaft is a little short. It looks like a six cly drive shaft. very dangerious there my friend.

gdavis · 12-04-2013, 07:36 PM

Even the chicken knows that something is wrong with the brakes.

cmullin@numail.org · 12-05-2013, 10:59 AM

I will take the 350 intake manifold,if it is still available. Do you take PayPal?

05-16-2013, 08:37 PM	#176
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Glad ya made it back, hope the move goes well, and a giant shop is in the offing! Then beat that sucker like a rented mule! Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

06-27-2013, 03:44 PM	#178
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Settled in yet? Anxious to hear how the truck is going! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

09-02-2013, 06:49 PM	#179
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Guys, sorry for being gone so long. Had some life changing (Devastation) events and now I have to make some more changes (Reform). In July we lost our littlest granddaughter. Needless to say I was on the next flights out of Afghanistan. I have also now left my high-danger-high-pay work as well. After all the expenses were paid it became clear that I need to sell my toys. I will be selling the D&R truck and all the other parts and pieces I have accumulated over the last three years. I will be listing these shortly in the appropriate forum categories (please respect forum rules and ask questions in those threads, not in this thread). Thank you all so much for your support, Blake __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

09-02-2013, 08:19 PM	#180
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,707	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Sorry to hear that news. Our prayers go out to you and your family. Hope you stick around and hang out with out still. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-02-2013, 08:22 PM	#181
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB I'm sorry to read about the loss of a loved one. My thoughts are with you. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

09-03-2013, 08:09 AM	#183
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Sorry to hear it, Blake. Hope the hurt heals soon. Take care of the clan, and don't forget to check in on us. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

09-03-2013, 11:01 AM	#184
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Sorry to hear man. Hang in there, you're doing things right. __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

09-03-2013, 11:25 AM	#185
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,871	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB My condolences and god bless you and yours. Hang in there. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

09-04-2013, 07:35 AM	#187
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB So sorry to hear about your Grand daughter. I can only imagine the grief. God bless your family. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-04-2013, 07:36 PM	#190
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Even the chicken knows that something is wrong with the brakes. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

12-05-2013, 10:59 AM	#191
cmullin@numail.org Registered User Join Date: Oct 2010 Location: newnan georgia Posts: 3	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB I will take the 350 intake manifold,if it is still available. Do you take PayPal?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.